

Optitest
Opitest PCB
- Size
- 39.4 × 41.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 22
- Nets
- 25
- Pads
- 67
- Tracks, vias
- 146, 6
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 11 Feb 2023
- Updated
- 11 Feb 2023
Overview
Optitest is an open-source printed circuit board by ghgv, from the ghgv/Opitest repository on GitHub. It is a 2-layer board of 39.4 × 41.9 mm with 22 parts on 25 nets, routed with 146 tracks and 6 vias.
It is built around the ESP-12E. Its parts include 10 resistors, 6 connectors, 2 ICs, 1 capacitor and 1 diode. It belongs with the ESP8266 boards of this library.
Main components
1Parts
22| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 1K | Resistor:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2, R3, R4, R5, R6 |
| 2 | 150 | Resistor:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R7, R8 |
| 2 | R | Resistor:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R9, R10 |
| 1 | 33uF | Capacitor:CP_Radial_D4.0mm_P1.50mm | C1 |
| 1 | Battery | Header:PinHeader_2x01_P1.27mm_Horizontal | J6 |
| 1 | Buzzer | Header:PinHeader_2x01_P1.27mm_Horizontal | BZ1 |
| 1 | Conn_BUENO | Header:PinHeader_2x01_P1.27mm_Horizontal | J3 |
| 1 | Conn_EXCELENTE | Header:PinHeader_2x01_P1.27mm_Horizontal | J4 |
| 1 | Conn_MALO | Header:PinHeader_2x01_P1.27mm_Horizontal | J1 |
| 1 | Conn_REGULAR | Header:PinHeader_2x01_P1.27mm_Horizontal | J2 |
| 1 | ESP-12E | ESP:ESP-12E_SMD | U1 |
| 1 | L78L33_SOT89 | REG:SOT-89-3 | U2 |
| 1 | LED | Header:PinHeader_2x01_P1.27mm_Horizontal | D1 |
| 1 | Programmer | Header:PinHeader_2x01_P1.27mm_Horizontal | J5 |
| 1 | SW_CONF | Conf:SW_PUSH-12mm | SW5 |
More from ghgv/Opitest
2- 2 layers85 × 72 mm

- 2 layers27 × 35 mm

Similar boards
- 2 layers33.7 × 97.8 mm

HAN ESP TSS721
UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported
29 parts470 - 2 layers43 × 34.3 mm

- 2 layers25.6 × 23 mm

Breakout
skorokithakis/tiny-ESP8266-breakout
A very small and basic ESP8266 breakout board
12 parts115BSD-2-Clause - 2 layers104.8 × 72.1 mm

SST V2 4
mcbittech/souliss-smart-thermostat-WiFi
ESP8266 WiFi Smart Thermostat based on Souliss IoT Framework
53 parts110GPL-2.0 - 2 layers30 × 65 mm

Hardpass pcb
girst/hardpass-passwordmanager-mirror-of-git.gir.st
https://git.gir.st/hardpass.git - Seldomly Updated Mirror: Hardpass is a Raspberry Pi Zero based hardware password manager, using passwordstore.org.
34 parts101GPL-3.0 - 2 layers82.5 × 22.4 mm

Window Sensor
MakerMeik/Window-Sensor
Here you will find all the files you need to build an ESP8266-based window sensor whose battery will last for several years. Have a look at my video on Youtube: https://youtu.be/vxbuO1zWo3w
19 parts67 - 2 layers49.5 × 30 mm

- 2 layers100 × 45 mm

Questions
How big is the Optitest PCB?
It measures 39.4 × 41.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Optitest use?
22 parts, built around the ESP-12E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Optitest KiCad files?
From the ghgv/Opitest repository on GitHub, at the commit this page was made from: the board is Optitest/Optitest.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Optitest design in my own project?
Its repository states no licence, so its author keeps all rights: ask ghgv before reusing the design.