

Line Converter
A simple audio line output converter for JAMMA boards. Takes the amplified audio from a JAMMA board and brings them down to consumer audio levels for headphones or your own amplifier.
- Size
- 77.5 × 41.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 16
- Pads
- 75
- Tracks, vias
- 46, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 2 Feb 2021
- Updated
- 3 Aug 2020
Overview
Line Converter is an open-source printed circuit board by gheadcn, from the gheadcn/Line-Converter repository on GitHub, published under the MIT licence. It is a 2-layer board of 77.5 × 41.9 mm with 13 parts on 16 nets, routed with 46 tracks and 0 vias.
Its parts include 4 resistors, 2 connectors and 1 switch. It belongs with the audio and music boards of this library.
README
README.mdLine-Converter
A simple audio line output converter for JAMMA boards. Takes the amplified audio from a JAMMA board and brings them down to consumer audio levels for headphones or your own amplifier. Compatible with either mono or stereo board designs (switchable). Inputs on a block terminal for ease of use, outputs run to a 3.5mm jack.
Voltage Divider
JAMMA boards will typically output audio at roughly +/- 6V peak to peak, the goal of this board is to reduce that to 0.5V peak to peak expected for standard audio equipment. This board uses a voltage divider bridge with Z1 = 390 Ohms and Z2 = 47 ohms for a ratio of 0.1.
Isolation
The board also isolates the board from the downstream audio equipment by way of two 1-1 transformers. These are in place to prevent failures in the board cascading to downstream equipement.
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 390 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R10, R11 |
| 2 | 47 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R12, R13 |
| 2 | Transformer_1P_SS_2T | SamacSys:TY145P | T1, T2 |
| 1 | JAMMA Audio | SamacSys:SHDR3W100P0X500_1X3_1500X900X1290P | J2 |
| 1 | Mono_Switch | SamacSys:400UDP1R1BLKM2RE | SW1 |
| 1 | Phono Out | SamacSys:SJ13523N | J1 |
The 9 most common of 13 parts.
Similar boards
- 2 layers40 × 20 mm

- 2 layers74.9 × 49.5 mm

- 2 layers35 × 29 mm

MagSpoofTC
samyk/magspoof
A portable device that can spoof/emulate any magnetic stripe, credit card or hotel card "wirelessly", even on standard magstripe (non-NFC/RFID) readers.
13 parts4.2k - 2 layers20.6 × 23.6 mm

AO-03 signal amplifier
fossasia/pslab-scripts
Pocket Science Lab - Scripts for Sensor Experiments
13 parts1.6kApache-2.0 - 2 layers47 × 35.6 mm

- 2 layers95 × 95 mm

Cube batteryboard
willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels
13 parts1.1kGPL-3.0 - 2 layers15.2 × 20.3 mm

Pt100stick
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
13 parts1.1kGPL-3.0 - 2 layers53.9 × 23.2 mm

Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
13 parts1kGPL-3.0
Questions
How big is the Line Converter PCB?
It measures 77.5 × 41.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Line Converter use?
13 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Line Converter KiCad files?
From the gheadcn/Line-Converter repository on GitHub, at the commit this page was made from: the board is Line Converter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Line Converter design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).