2 layers
Nrf bga
github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!
12 parts14kMIT
2 layers65 × 60 mm
Encoder Holder
gh0stless/Rebirth-RB338-Controller4an ulimate MIDI controller for Rebirth RB-338
- Size
- 65 × 60 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 12
- Nets
- 24
- Pads
- 74
- Tracks, vias
- 201, 11
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 17 Jan 2025
- Updated
- 11 Jul 2025
Overview
Encoder Holder is an open-source printed circuit board by gh0stless, from the gh0stless/Rebirth-RB338-Controller repository on GitHub. It is a 2-layer board of 65 × 60 mm with 12 parts on 24 nets, routed with 201 tracks and 11 vias.
Its parts include 6 switches, 4 diodes and 2 connectors.
README
README.mdRebirth-RB338-Controller
an ulimate MIDI controller for Rebirth RB-338
Parts
12| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | RotaryEncoder_Switch | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW1, SW2, SW3, SW4, SW5, SW6 |
| 4 | LED | LED_THT:LED_D3.0mm | D1, D2, D3, D4 |
| 1 | Conn_02x04_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Horizontal | J2 |
| 1 | Conn_02x10_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Horizontal | J1 |
Similar boards
- 2 layers66.9 × 74.5 mm
- 2 layers40 × 15 mm
Sensors
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
12 parts3kApache-2.0 - 2 layers42.7 × 56.5 mm
- 2 layers26 × 16.9 mm
- 2 layers49 × 25 mm
5v boost regulator
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
12 parts915 - 2 layers28.3 × 10.3 mm
Tap Photosensor PCB
VoronDesign/Voron-Tap
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:
12 parts716GPL-3.0 - 2 layers25.4 × 70.4 mm
Tpmsniffer
stacksmashing/pico-tpmsniffer
A simple, very experimental TPM sniffer for LPC bus
12 parts696
Questions
How big is the Encoder Holder PCB?
It measures 65 × 60 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Encoder Holder use?
12 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Encoder Holder KiCad files?
From the gh0stless/Rebirth-RB338-Controller repository on GitHub, at the commit this page was made from: the board is KiCad/Encoder-Holder/Encoder-Holder.kicad_pcb and its schematic KiCad/Encoder-Holder/Encoder-Holder.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Encoder Holder design in my own project?
Its repository states no licence, so its author keeps all rights: ask gh0stless before reusing the design.