Gflinois/split-keyboardThis Git project contains everything that is needed for the construction of split 60 % keyboard. The layout used is a custom one (see layout) base on international qwerty. The project include:
Keyboard is an open-source printed circuit board by Gflinois, from the Gflinois/split-keyboard repository on GitHub, published under the MIT licence. It is a 2-layer board of 68.6 × 43.2 mm with 24 parts on 43 nets, routed with 191 tracks and 23 vias.
It is built around the ATMEGA32U4. Its parts include 8 capacitors, 5 switches, 4 resistors, 4 diodes and 1 IC. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.
This Git project contains everything that is needed for the construction of split 60 % keyboard. The layout used is a custom one (see layout) base on international qwerty. The project include:
This keyboard is a usb-c teather based one (no battey nor wireless connection provided yet). It is powered by an Atmega 328P stolen on an old arduino nano.
Contributions to this Git project are welcome! Please submit pull requests to the dev branch and include a detailed description of your changes.
This project is licensed under the MIT License. See the LICENSE file for details.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 0.1u | Capacitor_SMD:C_0805_2012Metric | C3, C4, C5, C6, C8 |
| 4 | D | keyboard_parts:D_SOD123_axial | D1, D2, D3, D4 |
| 4 | KEYSW | Button_Switch_Keyboard:SW_Matias_1.00u | K1, K2, K3, K4 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 2 | 22 | Resistor_SMD:R_0805_2012Metric | R3, R4 |
| 2 | 22p | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 1 | 4.7u | Capacitor_SMD:C_0805_2012Metric | C7 |
| 1 | ATMEGA32U4 | Package_QFP:TQFP-44_10x10mm_P0.8mm | U1 |
| 1 | SW_PUSH | Button_Switch_SMD:SW_SPST_TL3342 | SW1 |
| 1 | USB_mini_micro_B | keyboard_parts:USB_miniB_hirose_5S8 | J1 |
| 1 | XTAL_GND | Crystal:Crystal_SMD_SeikoEpson_TSX3225-4Pin_3.2x2.5mm_HandSoldering | X1 |
It measures 68.6 × 43.2 mm and has 2 copper layers, 1.6 mm thick.
24 parts, built around the ATMEGA32U4. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Gflinois/split-keyboard repository on GitHub, at the commit this page was made from: the board is version-bébé/keyboard.kicad_pcb and its schematic keyboard2_ctrl (copy)/keyboard2_ctrl.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Gflinois/split-keyboard
This Git project contains everything that is needed for the construction of split 60 % keyboard. The layout used is a custom one (see layout) base on international qwerty. The project include:
joshajohnson/Hub16
A macro pad with 16 keys, two rotary encoders, a four port USB hub, and plenty of LEDs!
tmk/USB2USB_Converter
USB to USB keyboard protocol converter supported by TMK keyboard firmware
evyd13/gh80-series
GH80-1800, GH80-3700 and GH80-3003 by Evy (aka anykeys.eu)
