2 layers50 × 25 mm
Mbus master
roarfred/AmsToMqttBridge
Minimalistic system to read AMS/HAN data from electrical meter
50 parts223
2 layers
Proyecto mongochos
germannyyy/informe-final- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 11
- Nets
- 43
- Pads
- 122
- Tracks, vias
- 113, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 5 Dec 2024
- Updated
- 5 Dec 2024
Overview
Proyecto mongochos is an open-source printed circuit board by germannyyy, from the germannyyy/informe-final repository on GitHub. It is a 2-layer board with 11 parts on 43 nets, routed with 113 tracks and 0 vias.
It is built around the BC337. Its parts include 3 resistors, 3 connectors, 2 transistors, 1 IC and 1 switch. It belongs with the RP2040 boards of this library.
Main components
1README
README.mdinforme-final
INTEGRANTES:
German Dabundo Patricio Luna Tomas Morales Ezequiel Rios Lucas Torrico
FUNCIONAMIENTO
Nuestro proyecto es un calentador que trabaja con un sensor de temperatura 18b20 que le da la info a la raspberry pi pico, el calentador irá cambiando de estado hasta llegar a la temperatura deseada.
LISTA DE MATERIALES
Raspberry Pi Pico 2 transistores BC337 Calentador de auto Fuente de corriente continua Sensor de temperatura 18B20 Rele 5V LED 3 Resistencias Cables
Parts
11| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3 |
| 2 | BC337 | Package_TO_SOT_THT:TO-92_Inline_Wide | Q1, Q2 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_D14mm_H7mm_P10mm | BZ1 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | Pico | MCU_RaspberryPi_and_Boards:RPi_Pico_SMD_TH | U1 |
| 1 | SANYOU_SRD_Form_C | Relay_THT:Relay_SPDT_SANYOU_SRD_Series_Form_C | K1 |
| 1 | display | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | hc-05 bluetooth | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J3 |
Questions
What parts does the Proyecto mongochos use?
11 parts, built around the BC337. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Proyecto mongochos KiCad files?
From the germannyyy/informe-final repository on GitHub, at the commit this page was made from: the board is proyecto_mongochos.kicad_pcb and its schematic proyecto_mongochos.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Proyecto mongochos design in my own project?
Its repository states no licence, so its author keeps all rights: ask germannyyy before reusing the design.
Similar boards
- 2 layers118 × 103.5 mm
- 2 layers28.7 × 81.3 mm
- 2 layers
LM80C R6
leomil72/LM80C
A Z80-based homebrew computer withTMS9918, AY-3-8910, Z80 CTC, Z80 PIO, and Z80 SIO
153 parts123GPL-3.0 - 2 layers121 × 68 mm
Freeds sanchez
pablozg/freeds
Derivador de energía solar excedente creado por Pablo Zerón, Diseño PCB por Amcalo, Tester original por Aeizoon, Wiki por Zoilo Mora
42 parts108 - 2 layers56.6 × 57.7 mm
TashTwenty Tiny
lampmerchant/tashtwenty
An interface for the DCD protocol used by Apple's Hard Disk 20.
31 parts35GPL-3.0 - 2 layers52.8 × 149.3 mm
PixelSlasher
CTXz/Video-Glitch-Array
A collection of glitch art circuits dedicated to VGA signal manipulation
22 parts30 - 2 layers37.1 × 24.1 mm
