Skip to the content
2 layers92.7 × 99.1 mmDream 6800 Keypad, the printed circuit board in 3D

The People's Permacomputer is a project dedicated to resourcing the specification, and then construction of a 'permacomputer'.

Size
92.7 × 99.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
24
Nets
11
Pads
51
Tracks, vias
101, 0
Routed
Yes
KiCad
KiCad 3
Created
5 Dec 2024
Updated
30 Apr 2026

Overview

Dream 6800 Keypad is an open-source printed circuit board by genossen, from the genossen/peoples-permacomputer repository on GitHub. It is a 2-layer board of 92.7 × 99.1 mm with 24 parts on 11 nets, routed with 101 tracks and 0 vias.

Its parts include 19 switches and 5 connectors. It belongs with the keyboards and input boards of this library.

README

README.md

The People's Permacomputer Project

The People's Permacomputer (henceforth known as "the people's computer", or "the permacomputer") is a project dedicated to resourcing the specification, and then construction of a 'permacomputer'.

  1. Who are the people running this project?
  2. What is a permacomputer?
  3. What is the point of this project?
  4. What distinguishes this project from the others?
  5. What previous historical traditions inspire this project?

Who?

"The Committee"

Yes you can join the committee.

What is a permacomputer?

TL/DR

The ultimate goal of the project is to construct computers which will last a really long time, and still stay operational.

Are you serious?

This project should largely be regarded as a piece of art. If someone finds some practical use for what we are building, however, that would also give us joy.

Is this a kit project?

It is a project pipe-dream to end up manufacturing permacomputer units at a kind of cottage-industry level, perhaps something for a worker's co-operative to do. These units will be really, really cheap--if it's not cheap, it's not accessible to the poor.

What is the point of this project?

The original purpose of this project was to design and then construct computers that would be able to survive a societal collapse.

After working on the project, it became apparent that the point of the project should not be to imagine a hypothetical future, but to engage practically with the problems of the present.

The entire computing stack of the modern era is large, confusing, and unsafe. People would rather excuse themselves from having to learn about it. Who can blame them?

The first aim of the project is to be exceedingly cost effective: "if the oppressed cannot access some technology, then it is not revolutionary".

The second aim of the project is the promotion of digital literacy. Digital literacy should promote a joyful user experience that is non-exploitative. It should also foster a sense of community--"no-one is an island".

To this end, the scope of the people's permacomputer project was deliberately limited to programs around or just over 100 lines. Definitely not more than 200.

The project therefore decided to investigate BASIC as the paradigmatic human-computer interface for the permacomputer.

For the application towards which it was targeted, the investigation the project has done so far into BASIC has been fruitful, and even quite surprising--the 70s/80s hobby computing scene was far richer and more creative than the project previously assumed: not less than five (5) different text editors in BASIC were unearthed!

OLD.

Mutual exclusion

There are many influential projects which attempt to address the same set of values driving the people's permacomputer project. Some worthy of note can be listed in no particular order:

All of these projects are concerned with some subset of the principles the permacomputer project holds dear. Collapse OS is software that aims to be system agnostic, and assumes the previous acquisition of some supported hardware.

READ MORE

Adventures in the traditions of computation

We seem to take it for granted that a computer in everyone's hand just is democratic computing. Indeed, the ubiquity of contemporary computation has been confused for 'democracy'.

As quickly as we marched towards computing for the masses, we marched just as swiftly away.

OUR INSPIRATION

PROJECT RESULTS

Parts

24
QtyValueFootprintReferences
4CONN_11pinP2, P3, P4, P5
1VinKK3K1
1VinKK8P1
10SW_KB1SW4
11SW_KB1SW9
12SW_KB1SW13
13SW_KB1SW17
14SW_KB1SW3
15SW_KB1SW8
16SW_KB1SW12
17SW_KB1SW16
18SW_KB1SW2
19SW_KB1SW7
1ASW_KB1SW11
1BSW_KB1SW15
1CSW_KB1SW1
1DSW_KB1SW6
1ESW_KB1SW10
1FSW_KB1SW14
1FNSW_KB1SW18
1RSTSW_KB1SW5

Similar boards

  • 2 layers56 × 65 mmSeaTalk1, the printed circuit board in 3D

    SeaTalk1

    dotnet/iot

    This repo includes .NET Core implementations for various IoT boards, chips, displays and PCBs.

    24 parts2.4kMIT
  • 2 layers26.2 × 45.5 mmPL18 multiprotocol, the printed circuit board in 3D

    PL18 multiprotocol

    pascallanger/DIY-Multiprotocol-TX-Module

    Multiprotocol TX Module (or MULTI-Module) is a 2.4GHz transmitter module which controls many different receivers and models.

    24 parts1.9kGPL-3.0
  • 2 layers58 × 35.5 mmHat, the printed circuit board in 3D

    Hat

    menloresearch/asimov-1

    v1 of Asimov, an open-source humanoid robot

    24 parts1.4kCERN-OHL-S-2.0
  • 2 layers21.6 × 19.5 mmMicron Logo LED, the printed circuit board in 3D

    Micron Logo LED

    DraftShift/StealthChanger

    Tool changing system for Vorons and other front mount printer motion systems, not just stealthburner.

    24 parts1.2kGPL-3.0
  • 2 layers158 × 11 mmRainbow Matchstick, the printed circuit board in 3D

    Rainbow Matchstick

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    24 parts1.1kGPL-3.0
  • 2 layers85.6 × 54 mmTRACED wio1262-carrier, the printed circuit board in 3D

    TRACED wio1262-carrier

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    24 parts915
  • 2 layers36 × 20 mmCombined, the printed circuit board in 3D

    Combined

    adamb314/ServoProject

    Getting the most out of your hobby servo

    24 parts545

Questions

How big is the Dream 6800 Keypad PCB?

It measures 92.7 × 99.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Dream 6800 Keypad use?

24 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Dream 6800 Keypad KiCad files?

From the genossen/peoples-permacomputer repository on GitHub, at the commit this page was made from: the board is old/phase-1/dream-6800/KiCad - Dream 6800 Keypad/Dream_6800_Keypad.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Dream 6800 Keypad design in my own project?

Its repository states no licence, so its author keeps all rights: ask genossen before reusing the design.