2 layers37 × 51 mm
ARM JTAG TC2050-AVR
Gekkio/misc-hardware
Miscellaneous/utility/convenience hardware by Gekkio
6 parts6CC-BY-4.0
2 layers70 × 70 mm
EV MAX V E64
Gekkio/misc-hardware6Miscellaneous/utility/convenience hardware by Gekkio
- Size
- 70 × 70 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 34
- Nets
- 65
- Pads
- 211
- Tracks, vias
- 464, 93
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 26 Nov 2018
- Updated
- 6 Nov 2020
Overview
EV MAX V E64 is an open-source printed circuit board by Gekkio, from the Gekkio/misc-hardware repository on GitHub, published under the CC-BY-4.0 licence. It is a 2-layer board of 70 × 70 mm with 34 parts on 65 nets, routed with 464 tracks and 93 vias.
It is built around the 5M160ZE64C5N and XC6420AB19MR-G. Its parts include 16 capacitors, 10 connectors, 2 resistors and 2 ICs. It belongs with the interfaces and adapters and microcontroller boards boards of this library.
Main components
2
5M160ZE64C5N
EQFP-64(7x7)0℃~+85℃ 1.71V~1.89V 128 160 54 7.5ns In-system programming MAX V Supports hot swap EQFP-64(7x7) Programmable Logic Device (CPLDs/FPGAs) ROHSIntel/AlteraProgrammable Logic Device (CPLDs/FPGAs)
XC6420AB19MR-G
SOT-23-6-40℃~+85℃@(Ta) 1.8V、3.3V 150mA、150mA 2 270mV@(150mA)、450mV@(150mA) 5.5V 55uA 75dB Fixed Positive SOT-23-6 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTorex SemiconductorVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
34| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C2, C4, C5, C7, C8 |
| 4 | Conn_02x08_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Vertical | J3, J6, J10, J13 |
| 4 | DNP | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 10uF | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C11, C12, C13 |
| 3 | 4.7uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C3, C6, C9 |
| 3 | 47uF | Capacitor_SMD:CP_Elec_5x5.8 | C14, C15, C16 |
| 3 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J7, J9, J11 |
| 1 | 100uF | Capacitor_SMD:CP_Elec_6.3x5.8 | C10 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R2 |
| 1 | 5M160ZE64 | Gekkio_Package_QFP:EQFP-64-1EP_7x7mm_P0.4mm_EP4.5x4.5mm | U1 |
| 1 | Conn_02x02_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | J4 |
| 1 | JTAG | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | TC2050_JTAG | Connector:Tag-Connect_TC2050-IDC-NL_2x05_P1.27mm_Vertical_with_bottom_clip | J2 |
| 1 | XC6420AB19MR | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | U2 |
More from Gekkio/misc-hardware
12- 2 layers30 × 40 mm
PIC ICSP-504050
Gekkio/misc-hardware
Miscellaneous/utility/convenience hardware by Gekkio
6 parts6CC-BY-4.0 - 2 layers25 × 35 mm
PIC ICSP TC2030
Gekkio/misc-hardware
Miscellaneous/utility/convenience hardware by Gekkio
6 parts6CC-BY-4.0 - 2 layers39.6 × 52.5 mm
BRK QFP-32-7x7-P0.8
Gekkio/misc-hardware
Miscellaneous/utility/convenience hardware by Gekkio
5 parts6CC-BY-4.0 - 2 layers39.6 × 52.5 mm
BRK QFP-44-10x10-P0.8-Sharp
Gekkio/misc-hardware
Miscellaneous/utility/convenience hardware by Gekkio
5 parts6CC-BY-4.0 - 2 layers39.6 × 52.5 mm
BRK QFP-44-10x10-P0.8
Gekkio/misc-hardware
Miscellaneous/utility/convenience hardware by Gekkio
5 parts6CC-BY-4.0 - 2 layers45.6 × 57.3 mm
BRK QFP-56-10x10-P0.65
Gekkio/misc-hardware
Miscellaneous/utility/convenience hardware by Gekkio
5 parts6CC-BY-4.0 - 2 layers20 × 29 mm
- 2 layers16.3 × 23.4 mm
BRK SOT-23-3
Gekkio/misc-hardware
Miscellaneous/utility/convenience hardware by Gekkio
4 parts6CC-BY-4.0 - 2 layers16.3 × 25 mm
BRK MSOP-8-1EP-3x3-P0.65-EP1.68x1.88
Gekkio/misc-hardware
Miscellaneous/utility/convenience hardware by Gekkio
3 parts6CC-BY-4.0 - 2 layers16.3 × 22.4 mm
BRK MSOP-8-3x3-P0.65
Gekkio/misc-hardware
Miscellaneous/utility/convenience hardware by Gekkio
3 parts6CC-BY-4.0 - 2 layers16.3 × 25 mm
BRK MSOP-10-3x3-P0.5
Gekkio/misc-hardware
Miscellaneous/utility/convenience hardware by Gekkio
3 parts6CC-BY-4.0
Similar boards
- 4 layers84 × 51 mm
A500-sd plus controller
Mathesar/a500-sd-plus-controller
SD-card plus Ethernet controller for the Amiga 500
84 parts18 - 6 layers152.4 × 92 mm
- 2 layers142.5 × 106.4 mm
- 2 layers26 × 30 mm
Microcontroller
FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop
34 parts1.1kCC-BY-4.0 - 2 layers171.2 × 72.9 mm
Amiga gfxcard old
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
34 parts1k - 2 layers53.5 × 62.5 mm
Led matrix
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
34 parts915 - 2 layers45 × 26 mm
- 2 layers41.7 × 25.7 mm
Headphones flex pcb rigid
strangeparts/niubi-headphones
Flexible circuit board design for adding a headphone jack to an iPhone 7
34 parts493MIT
Questions
How big is the EV MAX V E64 PCB?
It measures 70 × 70 mm and has 2 copper layers, 1.6 mm thick.
What parts does the EV MAX V E64 use?
34 parts, built around the 5M160ZE64C5N and XC6420AB19MR-G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the EV MAX V E64 KiCad files?
From the Gekkio/misc-hardware repository on GitHub, at the commit this page was made from: the board is EV-MAX-V-E64/EV-MAX-V-E64.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the EV MAX V E64 design in my own project?
Its repository publishes it under the CC-BY-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).