4 layers62.8 × 53.3 mm
4 layers19.1 × 24.7 mm
MeshCan
geekscape/meshdevMeshThing and related development: Hardware and Software
- Size
- 19.1 × 24.7 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 22
- Nets
- 46
- Pads
- 157
- Tracks, vias
- 540, 44
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 21 Nov 2013
- Updated
- 22 Dec 2013
Overview
MeshCan is an open-source printed circuit board by geekscape, from the geekscape/meshdev repository on GitHub. It is a 4-layer board of 19.1 × 24.7 mm with 22 parts on 46 nets, routed with 540 tracks and 44 vias.
Its parts include 8 capacitors, 3 fuses, 1 resistor, 1 IC and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.
README
README.mdmeshdev
MeshThing and related development: Hardware and Software
Parts
22| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 22p | SMD_Packages:SM0402_c | C5, C6, C7, C8 |
| 3 | CONN_1 | _MT_MC_Pretty:_MT_Fiducial | F1, F2, F3 |
| 2 | 100n | SMD_Packages:SM0402_c | C1, C2 |
| 2 | 10p | SMD_Packages:SM0402_c | C3, C4 |
| 1 | 10k | SMD_Packages:SM0402_r | R1 |
| 1 | 32kHz | _MT_MC_Pretty:_MC_TF32D-32768-Crystal | XTAL2 |
| 1 | ANTENNA | _MT_MC_Pretty:_MT_IFA-2.4GHzPCBAntenna | A1 |
| 1 | ATMEGA2564/1284/644RFR2 | _MT_QFN50P700X700-49N-MeshThingWPadVias | IC1 |
| 1 | Balun | _MT_Wuerth748421245-A | B1 |
| 1 | CONN34 | _MT_MC_Pretty:_MC_CanFootprint-34Pin | P1 |
| 1 | CRYSTAL_SMD-TSX3225 | _MT_MC_Pretty:16MHz-3.2x2.5mm-TSX-3225 | XTAL1 |
| 1 | ICSP | _MT_MC_Pretty:_MC_pin_pad_3x2 | H1 |
| 1 | LOGO | _MT_OHW_LOGO:LOGO | G*** |
| 1 | PrettyLady | _MT_MC_Pretty:_MC_LOGO-PrettyLady | PrettyLady |
| 1 | RFShield | _MT_MC_Pretty:_MT_MC_EMIShield-16.5x16.5 | S1 |
Questions
How big is the MeshCan PCB?
It measures 19.1 × 24.7 mm and has 4 copper layers, 1.6 mm thick.
What parts does the MeshCan use?
22 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MeshCan KiCad files?
From the geekscape/meshdev repository on GitHub, at the commit this page was made from: the board is MeshCan/Hardware/MeshCan.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the MeshCan design in my own project?
Its repository states no licence, so its author keeps all rights: ask geekscape before reusing the design.
Similar boards
- 4 layers91.5 × 65 mm
Spotmicro
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
22 parts915 - 4 layers113.3 × 64 mm
- 4 layers78.1 × 77.5 mm
- 4 layers65 × 51.5 mm
- 4 layers41.5 × 41.6 mm
RAM Module
ahmadexp/Open-Source-PC110
Figuring out the missing technical documentation of the beloved PC110
22 parts98 - 4 layers29 × 61 mm
Cfxsx
neggles/cfxsx
CFexpress to M.2 NVMe drive adapter. Intended for Xbox Series X and S, but untested.
22 parts69CC-BY-SA-4.0 - 4 layers
Tiav3 s14160
OpenSiPM/sipm-bias-control
Single channel silicon photomultipliers for high-speed fluorescence imaging
22 parts44