
Switch
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

USB is great - endless 5V power supplies to be used on many projects. As a result, I design a lot of things with it, and you might as well.
Usbanana is an open-source printed circuit board by gcormier, from the gcormier/usbanana repository on GitHub. It is a 2-layer board of 41 × 32 mm with 6 parts on 5 nets, routed with 15 tracks and 0 vias.
Its parts include 2 resistors and 2 connectors.

USB is great - endless 5V power supplies to be used on many projects. As a result, I design a lot of things with it, and you might as well.
While there are many USB power meters to show current/voltage information, I wanted a way to use the current-limiting features of my power supply when I first plug in a design so nothing goes boom. Assuming that's the case, I can then also see what sort of current draw the device has.
The banana spacing is adjustable as well since it would appear the standard for banana plugs is not a standard in some cases. There is a spot for either through-hole or SMT resistors across data lines if your device is smart enough to check for that.
If you would to purchase a pre-made version, you can get it on my store usbanana
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 5V | !Greg:Banana_Jack_Slot | +5V |
| 1 | GND | !Greg:Banana_Jack_1Pin | J3 |
| 1 | OPT | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | OPT | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R1 |
| 1 | USB_A | Connector_USB:USB_A_Molex_105057_Vertical | J1 |
The 5 most common of 6 parts.

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.


Jcparkyn/dpoint
Open-source digital stylus using camera tracking and inertial measurements

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

It measures 41 × 32 mm and has 2 copper layers, 1.6 mm thick.
6 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the gcormier/usbanana repository on GitHub, at the commit this page was made from: the board is pcb/usbanana.kicad_pcb and its schematic pcb/usbanana.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask gcormier before reusing the design.