
Retro stack power clock
gcoonrod/retro-stack
A retro computer project based on stackable PCB boards.

A retro computer project based on stackable PCB boards.
Retro stack debug arduino mega shield is an open-source printed circuit board by gcoonrod, from the gcoonrod/retro-stack repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 90.2 × 53.3 mm with 17 parts on 86 nets, routed with 173 tracks and 28 vias.
It belongs with the retro computing and games boards of this library.
This module contains the W65C02S CPU, a selectable high speed oscillator, and a selectable DS1813 reset signal manager.
Current schematic pdf.


N/A
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | MountingHole_3.2mm | Arduino_MountingHole:MountingHole_3.2mm | MH1, MH2, MH3, MH4, MH5, MH6 |
| 2 | Analog | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J3, J5 |
| 1 | BUS_6502 | Connector_IDC:IDC-Header_2x20_P2.54mm_Vertical | J8 |
| 1 | Communication | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J6 |
| 1 | Digital | Connector_PinSocket_2.54mm:PinSocket_2x18_P2.54mm_Vertical | J7 |
| 1 | G*** | kibuzzard-642888DE | kibuzzard-642888DE |
| 1 | JMP_PWR | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP1 |
| 1 | LOGO | RetroStack:RetroStackFullLogo13x10mm | G*** |
| 1 | PWM | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J4 |
| 1 | PWM | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J2 |
| 1 | Power | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J1 |

gcoonrod/retro-stack
A retro computer project based on stackable PCB boards.

gcoonrod/retro-stack
A retro computer project based on stackable PCB boards.

gcoonrod/retro-stack
A retro computer project based on stackable PCB boards.

gcoonrod/retro-stack
A retro computer project based on stackable PCB boards.

gcoonrod/retro-stack
A retro computer project based on stackable PCB boards.

gcoonrod/retro-stack
A retro computer project based on stackable PCB boards.

gcoonrod/retro-stack
A retro computer project based on stackable PCB boards.

gcoonrod/retro-stack
A retro computer project based on stackable PCB boards.

gcoonrod/retro-stack
A retro computer project based on stackable PCB boards.



hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

DDeGonge/OS-ARM
This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…


It measures 90.2 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
17 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the gcoonrod/retro-stack repository on GitHub, at the commit this page was made from: the board is boards/retro-stack-debug-arduino-mega-shield/retro-stack-debug-arduino-mega-shield.kicad_pcb and its schematic boards/6502-min-sbc/6502-min-sbc.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).