2 layers98 × 27 mm
2 layers34.9 × 34.9 mm
TLink
gblach/TLink5Segger J-Link to Tag-Connect TC2050 adapter
- Size
- 34.9 × 34.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 5
- Nets
- 18
- Pads
- 45
- Tracks, vias
- 69, 8
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 25 Oct 2020
- Updated
- 22 Feb 2021
Overview
TLink is an open-source printed circuit board by gblach, from the gblach/TLink repository on GitHub. It is a 2-layer board of 34.9 × 34.9 mm with 5 parts on 18 nets, routed with 69 tracks and 8 vias.
It belongs with the interfaces and adapters boards of this library.
README
README.mdSegger J-Link to Tag-Connect TC2050 adapter
It follows standard JTAG/SWD pinout used on many Cortex-M boards.
You can make your own boards using this gerber file.
Features:
- IDC 20 (0.10") connector for Segger J-Link
- IDC 10 (0.10") connector for Tag-Connect TC2050-IDC or TC2050-IDC-NL
- IDC 10 (0.05") connector for Tag-Connect TC2050-IDC-050, TC2050-IDC-050-ALL, TC2050-IDC-NL-050, TC2050-IDC-NL-050-ALL or directly to JTAG/SWD header
- Jumper to connect pin 5 to +5V or GND
- Jumper to connect pin 9 to nTRST
Tag-Connect TC2050-IDC-050 and TC2050-IDC-NL-050 have no pins 5 and 9 connected, so the jumpers do nothing for these two cables.
Parts
5| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | Conn_02x05_Odd_Even | SHF-105-01-L-D-TH:SHF-105-01-L-D-TH | J3 |
| 1 | Conn_02x05_Odd_Even | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J2 |
| 1 | Conn_02x10_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x10_P2.54mm_Horizontal | J1 |
Questions
How big is the TLink PCB?
It measures 34.9 × 34.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the TLink use?
5 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TLink KiCad files?
From the gblach/TLink repository on GitHub, at the commit this page was made from: the board is TLink.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the TLink design in my own project?
Its repository states no licence, so its author keeps all rights: ask gblach before reusing the design.
Similar boards
- 2 layers21 × 33 mm
24g2usb pico2w
joypad-ai/joypad-os
Universal controller firmware for building adapters, dongles, and custom controllers.
5 parts1.7kApache-2.0 - 2 layers53.2 × 59.6 mm
A10 OLinuXino Lime Rev B SHIELD TEMPLATE
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
5 parts1.5k - 2 layers30 × 11 mm
Main control board servo tester
jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.
5 parts1.1k - 2 layers78.8 × 35.3 mm
KiCadTest
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
5 parts915 - 2 layers50 × 23 mm
- 2 layers43.2 × 28.5 mm
- 2 layers20.3 × 15.2 mm
L0 light sensor
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
5 parts546MIT