

ESC PCB V1
Custom three-phase drone ESC PCB design using KiCad, an STM32 microcontroller, and a DRV8320 gate driver.
- Size
- 63 × 71.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 73
- Nets
- 64
- Pads
- 262
- Tracks, vias
- 634, 94
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 12 Oct 2026
- Updated
- 12 Oct 2026
Overview
ESC PCB V1 is an open-source printed circuit board by gavint-52, from the gavint-52/drone-esc-pcb repository on GitHub. It is a 2-layer board of 63 × 71.5 mm with 73 parts on 64 nets, routed with 634 tracks and 94 vias.
It is built around the CSD18532NQ5B and SMBJ28CA. Its parts include 28 resistors, 20 capacitors, 8 ICs, 2 diodes and 1 connector. It belongs with the robots and motor control boards and the STM32 boards of this library.
Main components
2README
README.mdDrone ESC PCB
Overview
A custom electronic speed controller (ESC) PCB designed for brushless DC motor applications.
Design Objectives
- Design a three-phase MOSFET power stage.
- Integrate a DRV8320 gate driver.
- Use an STM32 microcontroller for control.
- Design power distribution for a 6S LiPo battery system.
Hardware Components
- Microcontroller: STM32 (exact part number to be added)
- Gate driver: DRV8320
- Power MOSFETs: TI CSD18532NQ5B
- Design software: KiCad
My Contributions
- Schematic design and component selection
- Gate-driver and MOSFET circuit design
- PCB component placement and routing
- Power and ground layout considerations
Project Status
At fabrication stage of development.
Images
PCB renders and schematic screenshots will be added here.
Future Work
- Complete PCB layout and design-rule checks
- Prepare fabrication files
- Assemble and test the board# drone-esc-pcb Custom three-phase drone ESC PCB design using KiCad, an STM32 microcontroller, and a DRV8320 gate driver.
Parts
73| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100n | Capacitor_SMD:C_0603_1608Metric | C2, C3, C4, C5, C6, C9, C15 |
| 7 | 10k | Resistor_SMD:R_0603_1608Metric | R3, R6, R9, R10, R26, R27, R28 |
| 6 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R5, R8, R13, R15, R17 |
| 6 | 5Ω | Resistor_SMD:R_0805_2012Metric | R2, R4, R7, R12, R14, R16 |
| 6 | CSD18532NQ5B | MosFet:DNK8_TEX | U1, U2, U3, U6, U7, U8 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 1u | Capacitor_SMD:C_0603_1608Metric | C7, C8, C10 |
| 3 | 2.2k | Resistor_SMD:R_0603_1608Metric | R23, R24, R25 |
| 3 | 20k | Resistor_SMD:R_0603_1608Metric | R20, R21, R22 |
| 2 | 12p | Capacitor_SMD:C_0603_1608Metric | C17, C19 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric | C14, C18 |
| 2 | TestPoint | Connector_Wire:SolderWirePad_1x01_SMD_5x10mm | Bat-1, Bat+1 |
| 1 | 100nF 50V | Capacitor_SMD:C_0603_1608Metric | C13 |
| 1 | 100uF 50V | Capacitor_SMD:CP_Elec_10x10.5 | C11 |
| 1 | 10kΩ | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C20 |
| 1 | 10uF 50V | Capacitor_SMD:C_1210_3225Metric | C12 |
| 1 | 120R | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R18 |
| 1 | 220 | Resistor_SMD:R_0603_1608Metric | R19 |
| 1 | 3V3 | Connector_Wire:SolderWirePad_1x01_SMD_2x4mm | 3V3 |
| 1 | 4700n | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 47nF 50V | Capacitor_SMD:C_0603_1608Metric | C16 |
| 1 | 8 MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | Conn_01x04_Pin | Connector_PinSocket_1.00mm:PinSocket_1x04_P1.00mm_Vertical | J1 |
| 1 | DRV8320HRTVT | Gate Driver:RTV0032E | U5 |
| 1 | GND | Connector_Wire:SolderWirePad_1x01_SMD_2x4mm | GND1 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | Motor_A | Connector_Wire:SolderWirePad_1x01_SMD_5x10mm | MotA1 |
| 1 | Motor_B | Connector_Wire:SolderWirePad_1x01_SMD_5x10mm | MotB1 |
| 1 | Motor_C | Connector_Wire:SolderWirePad_1x01_SMD_5x10mm | MotC1 |
| 1 | SIG | Connector_Wire:SolderWirePad_1x01_SMD_2x4mm | SIG1 |
| 1 | SMBJ28CA | Diode Footprint for ESC:SMBJSeries_LTF | D2 |
| 1 | STM32G431CBTx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U4 |
Similar boards
- 2 layers63 × 71.5 mm

- 2 layers90 × 90 mm

Sahel battery
Aliou8/SAHEL-SPECTRA-RF
CubeSat for educational purposes. It is based on an STM32H7 MCU for data handling and uses two CC1125 radios for communication. The software is developed using a Zephyr-like RTOS.
41 parts2GPL-3.0 - 4 layers105 × 55 mm

MotorKit
zhbi98/ODriveX
【无刷电机FOC驱动器】双通道 FOC 无刷电机驱动套件,最高电压 60V 单通道电流可达 100A,可以驱动 1.2kW 以内 BLDC 或 PMSM(有中文注释)。
184 parts22MIT - 4 layers42 × 42 mm

Motor42
zhbi98/Motor42
【小型 42mm 伺服电机】支持 RS485 和 CAN 协议的闭环功能的步进电机,支持功率和通信级联(节点串联连接),适用于 3D 打印机,舵机,小型机械臂
89 parts8MIT - 4 layers35 × 35 mm

Motor35
zhbi98/Motor35
【小型 35mm 伺服电机】支持 CAN 协议的闭环功能的步进电机,支持功率和通信级联(节点串联连接),适用于 3D 打印机,舵机,小型机械臂
71 parts2MIT - 4 layers40 × 40 mm

AeroHawk FC
sbbxiii/The-Eagle
The Eagle: Custom STM32F405 4-Layer Autonomous Avionics Flight Controller PCB
76 parts1MIT - 4 layers70 × 100 mm

Skylink fc
ajisrawi/5g-3d-printed-drone
3D-printed quadcopter with a custom F405 flight controller, 4G/5G companion connectivity, and phone control
136 parts - 2 layers50 × 80 mm

Timer
Dhruv6576/CYTM-Digital-Timer
24 VDC cyclic relay timer: MG51 firmware + KiCad PCB generated from scratch
45 parts
Questions
How big is the ESC PCB V1 PCB?
It measures 63 × 71.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ESC PCB V1 use?
73 parts, built around the CSD18532NQ5B and SMBJ28CA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESC PCB V1 KiCad files?
From the gavint-52/drone-esc-pcb repository on GitHub, at the commit this page was made from: the board is ESC PCB V1.kicad_pcb and its schematic ESC PCB V1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESC PCB V1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask gavint-52 before reusing the design.