2 layers66.9 × 74.5 mm
2 layers70 × 70 mm
Macropad v2 0 1
gauntface/macropad- Size
- 70 × 70 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 30
- Pads
- 101
- Tracks, vias
- 93, 0
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 21 Mar 2021
- Updated
- 10 Oct 2022
Overview
Macropad v2 0 1 is an open-source printed circuit board by gauntface, from the gauntface/macropad repository on GitHub. It is a 2-layer board of 70 × 70 mm with 20 parts on 30 nets, routed with 93 tracks and 0 vias.
Its parts include 9 switches, 8 diodes, 1 IC and 1 connector. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.
README
README.mdMacropad
The PCB used the following libs:
Arduino
- Install the Arduino IDE
- Fedora should use flathub to avoid this issue
text flatpak remote-add --if-not-exists flathub https://flathub.org/repo/flathub.flatpakrepo flatpak install flathub cc.arduino.arduinoide
- Fedora should use flathub to avoid this issue
- Install the following libraries under
Tools > Manage Libraries:- HID-Project
- Adafruit GFX Library
- Adafruit SSD1306
- Install board in Arduino - see Sparkfuns guide for pro micro
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | D | Diode_THT:D_A-405_P7.62mm_Horizontal | D1, D2, D3, D4, D5, D6, D7, D8 |
| 1 | Conn_01x04_Male | Gauntface:Screen_38x12mm_JMD0_91_a | J1 |
| 1 | Key_1 | Switch_Keyboard_Kailh:SW_Hotswap_Kailh | SW1 |
| 1 | Key_2 | Switch_Keyboard_Kailh:SW_Hotswap_Kailh | SW2 |
| 1 | Key_3 | Switch_Keyboard_Kailh:SW_Hotswap_Kailh | SW3 |
| 1 | Key_4 | Switch_Keyboard_Kailh:SW_Hotswap_Kailh | SW4 |
| 1 | Key_5 | Switch_Keyboard_Kailh:SW_Hotswap_Kailh | SW5 |
| 1 | Key_6 | Switch_Keyboard_Kailh:SW_Hotswap_Kailh | SW6 |
| 1 | Layer_Btn | Button_1825910-6:SW_1825910-6-4 | SW8 |
| 1 | ProMicro | promicro:ProMicro | U1 |
| 1 | Reset_Btn | Button_1825910-6:SW_1825910-6-4 | SW9 |
| 1 | Rotary_Encoder_Switch | Gauntface:ACZ11BRXE | SW7 |
| 1 | Val** | Gauntface:gauntface-logo | Ref** |
Questions
How big is the Macropad v2 0 1 PCB?
It measures 70 × 70 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Macropad v2 0 1 use?
20 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Macropad v2 0 1 KiCad files?
From the gauntface/macropad repository on GitHub, at the commit this page was made from: the board is macropad-v2_0_1/macropad-v2_0_1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Macropad v2 0 1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask gauntface before reusing the design.
Similar boards
- 2 layers86.4 × 64.8 mm
- 2 layers36.2 × 26.8 mm
Esp32 minimal
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
20 parts4kMIT - 2 layers108.1 × 393.8 mm
Sweep compact ble
davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.
20 parts2.1k - 2 layers26 × 15.9 mm
TPS54340 Buck Regulator
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
20 parts1.2k - 2 layers67.6 × 30.5 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
20 parts1kGPL-3.0 - 2 layers44.3 × 28.7 mm
Lin bus adapter esp32
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
20 parts915 - 2 layers89.5 × 61.6 mm
FreeDeck TH 2020-02
FreeYourStream/freedeck-hardware
all the stuff you need to build your own FreeDeck
20 parts772