Skip to the content
2 layers30 × 15 mm2x5-1-27-to-2x5-2-54, the printed circuit board in 3D

2x5-1-27-to-2x5-2-54

galopago/adapter-boards

This board was created to convert between the "small" J-Link EDU Mini Programmer-Debbuger 1.27 mm pitch connector to a 2.54 mm male header.

Size
30 × 15 mm
Copper layers
2
Thickness
1.6 mm
Parts
4
Nets
10
Pads
20
Tracks, vias
61, 8
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
23 Oct 2024
Updated
17 Sep 2026

Overview

2x5-1-27-to-2x5-2-54 is an open-source printed circuit board by galopago, from the galopago/adapter-boards repository on GitHub. It is a 2-layer board of 30 × 15 mm with 4 parts on 10 nets, routed with 61 tracks and 8 vias.

README

2x5-127-to-254/README.md

2x5 pin 1.27 mm male to 2.54 mm male header adapter PCB

This board was created to convert between the "small" J-Link EDU Mini Programmer-Debbuger 1.27 mm pitch connector to a 2.54 mm male header.

PCB 3D picture

The J-Link EDU Mini sports a 2x5 1.27 mm male connector and includes a female to female 2x5 1.27 mm ribbon cable for target connection.

If for some reason your target doesn't have the same connector (debug pins scattered somewhere on the PCB), or want to connect to a circuit on a breadboard, this PCB will ease the task.

PCB FRONTPCB BACK

Panelized PCB

How to use this repository

The PCB was developed in KiCad V6.0.

Directory structure

  • The root folder contains KiCad files: project, schematic and PCB.
  • gerber/single directory contains ready to manufacture files, for a single board.
  • gerber/panel_100mmx100mm directory contains ready to manufacture files that fits in a 100mm x 100mm panel (use Vcuts!).
  • assets directory some additional info about the project.

License

Creative Commons License

This is an Open Hardware project and is licensed under a Creative Commons Attribution 4.0 International License.

Parts

4
QtyValueFootprintReferences
1Conn_02x05_Odd_EvenConnector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMDJ2
1Conn_02x05_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_VerticalJ1

The 2 most common of 4 parts.

More from galopago/adapter-boards

4
  • 2 layers22 × 8.9 mmBarrel panel-3p-5mm5x2mm1-to screw-3mm5, the printed circuit board in 3D

    Barrel panel-3p-5mm5x2mm1-to screw-3mm5

    galopago/adapter-boards

    This board was created to convert between the "small" J-Link EDU Mini Programmer-Debbuger 1.27 mm pitch connector to a 2.54 mm male header.

    2 parts
  • 2 layers9 × 16 mmDs-402-5mm push button to screw, the printed circuit board in 3D

    Ds-402-5mm push button to screw

    galopago/adapter-boards

    This board was created to convert between the "small" J-Link EDU Mini Programmer-Debbuger 1.27 mm pitch connector to a 2.54 mm male header.

    2 parts
  • 2 layers10.2 × 17.8 mmSma u fl, the printed circuit board in 3D

    Sma u fl

    galopago/adapter-boards

    This board was created to convert between the "small" J-Link EDU Mini Programmer-Debbuger 1.27 mm pitch connector to a 2.54 mm male header.

    2 parts
  • 2 layers14 × 16 mmToggle panel-3p to screw-3mm5, the printed circuit board in 3D

    Toggle panel-3p to screw-3mm5

    galopago/adapter-boards

    This board was created to convert between the "small" J-Link EDU Mini Programmer-Debbuger 1.27 mm pitch connector to a 2.54 mm male header.

    2 parts

Similar boards

  • 2 layers18.5 × 26 mm24g2usb rp2350zero, the printed circuit board in 3D

    24g2usb rp2350zero

    joypad-ai/joypad-os

    Universal controller firmware for building adapters, dongles, and custom controllers.

    4 parts1.7kApache-2.0
  • 2 layers116 × 33 mm966595-1 and 963356-1, the printed circuit board in 3D

    966595-1 and 963356-1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    4 parts1.2k
  • 2 layers19 × 18 mmDaughter board, the printed circuit board in 3D

    Daughter board

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    4 parts915
  • 2 layers24.8 × 24.8 mmNrf24 breakout, the printed circuit board in 3D

    Nrf24 breakout

    tardate/LittleArduinoProjects

    a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

    4 parts803MIT
  • 2 layers26 × 20 mmCap chain, the printed circuit board in 3D

    Cap chain

    drandyhaas/KiCadRoutingTools

    A set of Python/Rust tools to aid routing in KiCad

    4 parts744MIT
  • 2 layers34.7 × 20 mmXG Station Power MSI, the printed circuit board in 3D

    XG Station Power MSI

    osy/XG_Mobile_Station

    Open source eGPU dock for ROG Ally and ROG Flow

    4 parts712CC-BY-4.0
  • 2 layers20.3 × 24.5 mmJack power input, the printed circuit board in 3D

    Jack power input

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    4 parts546MIT

Questions

How big is the 2x5-1-27-to-2x5-2-54 PCB?

It measures 30 × 15 mm and has 2 copper layers, 1.6 mm thick.

What parts does the 2x5-1-27-to-2x5-2-54 use?

4 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the 2x5-1-27-to-2x5-2-54 KiCad files?

From the galopago/adapter-boards repository on GitHub, at the commit this page was made from: the board is 2x5-127-to-254/2x5-1-27-to-2x5-2-54.kicad_pcb and its schematic 2x5-127-to-254/2x5-1-27-to-2x5-2-54.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the 2x5-1-27-to-2x5-2-54 design in my own project?

Its repository states no licence, so its author keeps all rights: ask galopago before reusing the design.