
LevelShifter
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

Design files for GAINER LED Matrx shield
LedMatrix is an open-source printed circuit board by galjonsfigur, from the galjonsfigur/gainer-led-matrix-shield repository on GitHub. It is a 2-layer board of 38.1 × 35.6 mm with 21 parts on 26 nets, routed with 111 tracks and 0 vias.
Its parts include 10 resistors, 6 connectors and 1 diode. It belongs with the lEDs and displays boards of this library.

A simple shield for GAINER I/O board to connect a 8x8 LED Matrix. Single-sided PCB designed in KiCad with large 1206 SMD components. Contents:
img/: Folder with images of the board and connected LED Matrix.schematics.pdf - Connection diagram exported from KiCad.There is a little error in design - spacing between pin headers of GAINER board is too small so female pin headers have to be bent to fit. This shouldn't be an issue if the board is manufactured in very small quantity.
Author: galion (galion at sdf org)
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100 | Resistors_SMD:R_1206_HandSoldering | R1, R2, R3, R4, R5, R6, R7, R8 |
| 2 | 0 | Resistors_SMD:R_1206_HandSoldering | R9, R10 |
| 1 | Logo | Symbols:OSHW-Logo_7.5x8mm_Copper | D1 |
| 1 | M1 | Mounting_Holes:MountingHole_3.2mm_M3 | M1 |
| 1 | M2 | Mounting_Holes:MountingHole_3.2mm_M3 | M2 |
| 1 | M3 | Mounting_Holes:MountingHole_3.2mm_M3 | M3 |
| 1 | M4 | Mounting_Holes:MountingHole_3.2mm_M3 | M4 |
| 1 | ain | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | J5 |
| 1 | aout | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | J6 |
| 1 | din | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | J3 |
| 1 | dout | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | J4 |
| 1 | matrix-bottom | Pin_Headers:Pin_Header_Straight_1x08_Pitch2.54mm | J2 |
| 1 | matrix-top | Pin_Headers:Pin_Header_Straight_1x08_Pitch2.54mm | J1 |

gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad

Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.


It measures 38.1 × 35.6 mm and has 2 copper layers, 1.6 mm thick.
21 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the galjonsfigur/gainer-led-matrix-shield repository on GitHub, at the commit this page was made from: the board is ledMatrix.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask galjonsfigur before reusing the design.