
Track Device Shield
In this project i have designed and coded a shield for the STM32 Nucleo board L476RG.
- Size
- 70 × 55.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 107
- Pads
- 164
- Tracks, vias
- 103, 24
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 6 Apr 2026
- Updated
- 20 Jul 2026
Overview
Track Device Shield is an open-source printed circuit board by GaleaIoanStefan, from the GaleaIoanStefan/Tracking-device-PCB repository on GitHub. It is a 2-layer board of 70 × 55.5 mm with 17 parts on 107 nets, routed with 103 tracks and 24 vias.
It is built around the CAM-M8Q-0. Its parts include 6 resistors, 4 capacitors, 3 connectors, 2 ICs and 1 switch.
Main components
1README
README.mdProject description
In this project i have designed and coded a shield for the STM32 Nucleo board L476RG.
The shield is the prototype of a tracker that will update the position using a GPS module and a LoRa modem for communication with a server. The board is made to connect to the Orange LiveObjects server from which the data is put inside a MongoDB database and later a template is made in Grafana with the longitude and latitude coordinates. Two Python scripts are present in the project. One for getting the data from the LiveObjects through MQTT protocol, and the other links the data received to a endpoint. That endpoint in later linked to a Grafana JSON plugin to gather that data.
A T1000-E tracker was added to the Python scripting as well as configured inside the LiveObjects server for comparison between the two devices. The localization results and the Reveiced Signal Strength Index (RSSI) were compared in two separate GeoMap Grafana templates.
The programming of the board was done in STM32CubeIDE and all communications between The GPS, Lora and COM port were UART communications.
The Electrical Schematic
The layout of the PCB
The Results
Here we can see the developed tracking device marked with a green circle and the T1000 with a blue X. The notable difference between localization is given by measuring errors when one device was turned on while the other was not.
In the second plot it can be seen that the developed device is marked with a triangle while the T1000 is still marked with an X. Better performanes in the case of RSSI are recorded from the developed tracking device, meaning it has a smaller negative value. The broadcasted messages from the developed device were intercepted by a larger number of gateways throughout the city even when the spreading factor for both devices was the same.
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 22Ω | Resistor_SMD:R_0402_1005Metric | R3, R4, R5 |
| 2 | 220Ω | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 2 | NC | Capacitor_SMD:C_0805_2012Metric | C3, C4 |
| 1 | 0Ω | Inductor_SMD:L_0603_1608Metric | L1 |
| 1 | 4.7uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 470Ω | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | CAM-M8Q | Licenta_Footprint_Library:CAM-M8 | U2 |
| 1 | CN10 | Connector_PinSocket_2.54mm:PinSocket_2x19_P2.54mm_Vertical | J2 |
| 1 | CN7 | Connector_PinSocket_2.54mm:PinSocket_2x19_P2.54mm_Vertical | J1 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | U.FL-R-SMT_01_ | Licenta_Footprint_Library:HRS_U.FL-R-SMT_01_ | J3 |
| 1 | Wio_E5_Lora module | Licenta_Footprint_Library:Wio_E5_Lora module footprint | U1 |
Similar boards
- 8 layers163.5 × 123.5 mm

- 6 layers34 × 56 mm

- 2 layers82.3 × 75.7 mm

- 2 layers107 × 52 mm

CelestialSync
davidfobar/CelestialSync
This an telescope mount controller inspired by OnStep and OpenAstroTracker, but written OOP to be maintainable.
75 parts - 4 layers50 × 110 mm

- 2 layers50 × 67 mm

- 2 layers165.9 × 88.9 mm

- 2 layers71.1 × 49.5 mm

RDP Environmental
pbbp0904/HELEN
The rendering above is a rough idea of what this payload will look like with some of its components installed.
45 partsMIT
Questions
How big is the Track Device Shield PCB?
It measures 70 × 55.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Track Device Shield use?
17 parts, built around the CAM-M8Q-0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Track Device Shield KiCad files?
From the GaleaIoanStefan/Tracking-device-PCB repository on GitHub, at the commit this page was made from: the board is Track_Device_Shield.kicad_pcb and its schematic Track_Device_Shield.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Track Device Shield design in my own project?
Its repository states no licence, so its author keeps all rights: ask GaleaIoanStefan before reusing the design.