
StackLink
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

Breakout board from DB25 to 8 SMA connectors for KASM Eddy Current Sensors
LDC BNC interface is an open-source printed circuit board by gabeak2, from the gabeak2/KASM_LDC_SMA_breakout repository on GitHub. It is a 2-layer board of 158 × 56 mm with 29 parts on 42 nets, routed with 173 tracks and 0 vias.
Its parts include 16 resistors and 9 connectors. It belongs with the interfaces and adapters boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 0 | Resistor_SMD:R_0805_2012Metric | R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15, R16, R17 |
| 8 | Conn_Coaxial | gabe_connectors:SMA_BAT_Wireless_BWSMA-KWE-Z001 | J1, J2, J3, J5, J6, J7, J8, J9 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H4 |
| 1 | DB25_Pins_MountingHoles | gabe_connectors:TE-5747842-4 | J4 |

gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

OLIMEX/DIY-LAPTOP
Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop

UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported


It measures 158 × 56 mm and has 2 copper layers, 1.6 mm thick.
29 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the gabeak2/KASM_LDC_SMA_breakout repository on GitHub, at the commit this page was made from: the board is LDC_BNC_interface.kicad_pcb and its schematic LDC_BNC_interface.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask gabeak2 before reusing the design.