Skip to the content
2 layers80 × 53.5 mmURC OH Creator Board, the printed circuit board in 3D

Open source elements of the G1LRO Universal Radio Controller.

Size
80 × 53.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
21
Nets
57
Pads
279
Tracks, vias
110, 1
Pours
1
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
2 Jan 2024
Updated
2 Apr 2024

Overview

URC OH Creator Board is an open-source printed circuit board by G1LRO, from the G1LRO/universal-radio-controller repository on GitHub, published under the MIT licence. It is a 2-layer board of 80 × 53.5 mm with 21 parts on 57 nets, routed with 110 tracks and 1 via.

Its parts include 12 connectors, 2 switches and 1 capacitor.

README

README.md

universal-radio-controller

Open Hardware elements of the G1LRO Universal Radio Controller.

Refer to www.g1lro.uk for technical and electronic interface specifications

Parts

21
QtyValueFootprintReferences
12Conn_01x20_PinConnector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_VerticalJ1, J2, J3, J4, J5, J6, J7, J8, J9, J10, J11, J12
2Conn_01x12_PinConnector_PinSocket_2.54mm:PinSocket_1x12_P2.54mm_VerticalJ-MODEM1, J-MODEM2
2TestPointTestPoint:TestPoint_Pad_3.0x3.0mmGND1, SPK1
110u/10V/X5RCapacitor_SMD:C_0603_1608MetricC1
1SW MonitorURCEXTRAS:SW_Tactile_SPST_Angled_C2689823SW2
1SW_SP3TURCEXTRAS:SW_TPDT_THT-5mmSW1
1To AIOC RXDTestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mmRXD->CPU1

The 20 most common of 21 parts.

Similar boards

  • 2 layers28.3 × 39.8 mmLevelShifter, the printed circuit board in 3D

    LevelShifter

    gusmanb/logicanalyzer

    24 channel, 100Msps logic analyzer hardware and software

    21 parts5.1kGPL-3.0
  • 2 layers171.2 × 72.9 mmAmiga gfxcard before pour, the printed circuit board in 3D

    Amiga gfxcard before pour

    mntmn/amiga2000-gfxcard

    MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

    21 parts1k
  • 2 layers93.9 × 46 mmRectifier, the printed circuit board in 3D

    Rectifier

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    21 parts990GPL-3.0
  • 2 layers45.5 × 42.9 mmEsphome han reader, the printed circuit board in 3D

    Esphome han reader

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    21 parts915
  • 2 layers31.8 × 14.5 mmEsp prog, the printed circuit board in 3D

    Esp prog

    drandyhaas/KiCadRoutingTools

    A set of Python/Rust tools to aid routing in KiCad

    21 parts744MIT
  • 2 layers23.5 × 15.8 mmQuiverAttachPCB, the printed circuit board in 3D

    QuiverAttachPCB

    Arrow-air/project-quiver

    Project Quiver documentation, designs, and project artifacts.

    21 parts617CERN-OHL-S-2.0
  • 2 layers69.9 × 41.3 mmHeaterMeterLCD, the printed circuit board in 3D

    HeaterMeterLCD

    CapnBry/HeaterMeter

    HeaterMeter and LinkMeter Arduino BBQ Controller

    21 parts557MIT
  • 2 layers161.3 × 111.8 mmDoj, the printed circuit board in 3D

    Doj

    kelu124/echomods

    Open source ultrasound processing modules and building blocks

    21 parts463

Questions

How big is the URC OH Creator Board PCB?

It measures 80 × 53.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the URC OH Creator Board use?

21 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the URC OH Creator Board KiCad files?

From the G1LRO/universal-radio-controller repository on GitHub, at the commit this page was made from: the board is URC OH Creator Board/URC OH Creator Board.kicad_pcb and its schematic URC OH Creator Board/URC OH Creator Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the URC OH Creator Board design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).