Skip to the content
2 layers78.5 × 46.5 mmBuck, the printed circuit board in 3D

En este repositorio se guardaran los archivos correspondientes al desarrollo de una fuente de alimentacion regulada

Size
78.5 × 46.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
14
Nets
12
Pads
36
Tracks, vias
46, 0
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
7 Sep 2024
Updated
4 Jul 2026

Overview

Buck is an open-source printed circuit board by G-Leonel-6, from the G-Leonel-6/C2 repository on GitHub. It is a 2-layer board of 78.5 × 46.5 mm with 14 parts on 12 nets, routed with 46 tracks and 0 vias.

It is built around the IR2104PBF and IRF3205. Its parts include 4 connectors, 3 capacitors, 2 resistors, 2 transistors and 1 IC. It belongs with the power boards of this library.

Main components

2

README

README.md

C2

En este repositorio se guardaran los archivos correspondientes al desarrollo de una fuente de alimentacion regulada

Parts

14
QtyValueFootprintReferences
210Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR1, R2
2IRF3205Package_TO_SOT_THT:TO-220-3_VerticalQ1, Q2
110uCapacitor_THT:CP_Radial_D6.3mm_P2.50mmC3
11N5819Diode_THT:D_DO-41_SOD81_P10.16mm_HorizontalD1
12.7uCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mmC1
1200uInductor_THT:L_Toroid_Vertical_L16.5mm_W11.4mm_P7.62mm_Pulse_KM-2L1
122uCapacitor_THT:CP_Radial_D6.3mm_P2.50mmC2
1IR2104Package_DIP:CERDIP-8_W7.62mm_SideBrazed_LongPads_SocketU1
1OUTTerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-3-2-5.08_1x02_P5.08mm_HorizontalJ4
1VTerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-3-2-5.08_1x02_P5.08mm_HorizontalJ1
1VCCTerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-3-2-5.08_1x02_P5.08mm_HorizontalJ2
1VINTerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-3-2-5.08_1x02_P5.08mm_HorizontalJ3

More from G-Leonel-6/C2

4
  • 2 layers100 × 80 mmRegB, the printed circuit board in 3D

    RegB

    G-Leonel-6/C2

    En este repositorio se guardaran los archivos correspondientes al desarrollo de una fuente de alimentacion regulada

    61 parts
  • 2 layers100 × 80 mmRegA, the printed circuit board in 3D

    RegA

    G-Leonel-6/C2

    En este repositorio se guardaran los archivos correspondientes al desarrollo de una fuente de alimentacion regulada

    54 parts
  • 2 layers94.1 × 68 mmSupport, the printed circuit board in 3D

    Support

    G-Leonel-6/C2

    En este repositorio se guardaran los archivos correspondientes al desarrollo de una fuente de alimentacion regulada

    25 parts
  • 2 layers50 × 44.5 mmModulador triangular, the printed circuit board in 3D

    Modulador triangular

    G-Leonel-6/C2

    En este repositorio se guardaran los archivos correspondientes al desarrollo de una fuente de alimentacion regulada

    15 parts

Similar boards

  • 2 layers98.8 × 55.1 mmH bridge controller, the printed circuit board in 3D

    H bridge controller

    jayanta525/dual-h-bridge

    Dual H-Bridge Controller with IRF3205 and IR2104 MOSFET Driver, and with ATMega328P-AU PWM Controller

    104 parts5MIT
  • 2 layers100 × 100 mmCARTPOLE MOSFET, the printed circuit board in 3D

    CARTPOLE MOSFET

    conmeokhoi/Controller-for-Cart-Pole-System

    Designed PCB board with 24V/150W DC Motor Controller for Cart-Pole systems using IRF3205S MOSFETs and IR2104 drivers.

    129 parts1
  • 2 layersMultiple IRF2104, the printed circuit board in 3D

    Multiple IRF2104

    Sudhamsu98/IRF2104_MOSFET_Driver

    IRF2104 based MOSFET Driver

    130 parts1
  • 2 layers139.7 × 88.9 mmCharge Controller, the printed circuit board in 3D

    Charge Controller

    jharvey/Charge_Controller

    MPPT hardware which uses FUGU firmware

    163 parts24
  • 4 layers297.5 × 187.5 mmSpscnc, the printed circuit board in 3D

    Spscnc

    sps-EmLogic/spscnc

    CNC Controller board for FluidNC and TMC2160 controllers

    491 parts10GPL-3.0
  • 2 layers201.3 × 152.1 mmDC DC CONVERTER, the printed circuit board in 3D

    DC DC CONVERTER

    William-Souza-Santos/ADAPTIVE_FUZZY_LOGIC_CONTROL_FOUR_SWITCH_BIDIRECTIONAL_BUCK_BOOST_DC_DC_CONVERTER

    Final Year Project by Electronic Engineering

    95 parts6

Questions

How big is the Buck PCB?

It measures 78.5 × 46.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Buck use?

14 parts, built around the IR2104PBF and IRF3205. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Buck KiCad files?

From the G-Leonel-6/C2 repository on GitHub, at the commit this page was made from: the board is PCB Impresion/check4/buck/buck.kicad_pcb and its schematic PCB Impresion/Grupo3_Reg_B_V2 - Para imprimir/Grupo3_Reg_B/RegB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Buck design in my own project?

Its repository states no licence, so its author keeps all rights: ask G-Leonel-6 before reusing the design.