Skip to the content
2 layers25.8 × 12 mmSuzyqboard, the printed circuit board in 3D

An open Suzy-Q to hack your Chromebook with.

Size
25.8 × 12 mm
Copper layers
2
Thickness
1.6 mm
Parts
7
Nets
24
Pads
56
Tracks, vias
94, 7
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
27 Jan 2024
Updated
1 May 2026

Overview

Suzyqboard is an open-source printed circuit board by FyraLabs, from the FyraLabs/suzyqboard repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 25.8 × 12 mm with 7 parts on 24 nets, routed with 94 tracks and 7 vias.

Its parts include 4 resistors and 2 connectors.

README

README.md

SuzyQ Board

View on PCBHub

This project is an implementation of the SuzyQ used to access CCD on Chromebooks. Using CCD, you can (un)brick, debug, and flash (ex. coreboot) your Chromebook.

Purchase

You can purchase a SuzyQ Board on the Fyra Shop.

Usage

Check out our devdocs for usage information.

Images

Front Back

Parts

7
QtyValueFootprintReferences
25.1kResistor_SMD:R_0603_1608MetricR3, R4
122kResistor_SMD:R_0603_1608MetricR1
145.3kResistor_SMD:R_0603_1608MetricR2
1USB_C_Plug (Chromebook)FyraCustom:USB-C-SMD_TYPE-C-24P-GTJB-040P1
1USB_C_Receptacle (Host)Connector_USB:USB_C_Receptacle_HCTL_HC-TYPE-C-16P-01AJ2

The 6 most common of 7 parts.

Similar boards

  • 2 layersEncoder, the printed circuit board in 3D

    Encoder

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    7 parts4.3kMIT
  • 2 layers40 × 20 mmSensor smd, the printed circuit board in 3D

    Sensor smd

    scottbez1/splitflap

    DIY split-flap display

    7 parts4.2k
  • 2 layers19.8 × 30 mmZ limit, the printed circuit board in 3D

    Z limit

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    7 parts3.7k
  • 2 layers35.6 × 58.2 mmDisplay Carrier, the printed circuit board in 3D

    Display Carrier

    AxxAxx/AxxSolder

    STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power

    7 parts1.7kGPL-3.0
  • 2 layers20.3 × 16.3 mmMap MPX, the printed circuit board in 3D

    Map MPX

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    7 parts1.2k
  • 2 layers26 × 44 mmCompact carrier board, the printed circuit board in 3D

    Compact carrier board

    jamro/tiny-engineer

    A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

    7 parts1.1k
  • 2 layers26.4 × 53.8 mmAtari pickup, the printed circuit board in 3D

    Atari pickup

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    7 parts1kGPL-3.0
  • 2 layersRj45 breakout, the printed circuit board in 3D

    Rj45 breakout

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    7 parts990GPL-3.0

Questions

How big is the Suzyqboard PCB?

It measures 25.8 × 12 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Suzyqboard use?

7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Suzyqboard KiCad files?

From the FyraLabs/suzyqboard repository on GitHub, at the commit this page was made from: the board is suzyqboard.kicad_pcb and its schematic suzyqboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Suzyqboard design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).