Skip to the content
2 layers20.6 × 16.8 mmFlow rate, the printed circuit board in 3D

eVOLVER Hardware (PCB, 3D printed parts)

Size
20.6 × 16.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
5
Nets
2
Pads
8
Tracks, vias
2, 2
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
1 Jun 2019
Updated
3 Nov 2026

Overview

Flow rate is an open-source printed circuit board by FYNCH-BIO, from the FYNCH-BIO/hardware repository on GitHub. It is a 2-layer board of 20.6 × 16.8 mm with 5 parts on 2 nets, routed with 2 tracks and 2 vias.

Its parts include 2 diodes and 1 connector.

README

README.md

eVOLVER Hardware Components/CAD

This repository contains all hardware CAD files for the eVOLVER continuous culture platform.

For more information on the platform, check out our Nature Biotech publication.

For information on building, troubleshooting, and running experiments on the platform, reach out to us on the eVOLVER forum and read the wiki.

Software Repositories:

Parts

5
QtyValueFootprintReferences
2DDiode_SMD:D_0805_2012MetricD3, D4
2MountingHoleMountingHole:MountingHole_3.5mmH7, H8
1CONN_01X02Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalP3

More from FYNCH-BIO/hardware

12
  • 4 layers320 × 378.2 mmMotherboard, the printed circuit board in 3D

    Motherboard

    FYNCH-BIO/hardware

    eVOLVER Hardware (PCB, 3D printed parts)

    167 parts12
  • 4 layers33 × 66 mmADC, the printed circuit board in 3D

    ADC

    FYNCH-BIO/hardware

    eVOLVER Hardware (PCB, 3D printed parts)

    98 parts12
  • 4 layers120.6 × 115.3 mmFlow rate, the printed circuit board in 3D

    Flow rate

    FYNCH-BIO/hardware

    eVOLVER Hardware (PCB, 3D printed parts)

    87 parts12
  • 4 layers109.2 × 64.5 mmMin evolver, the printed circuit board in 3D

    Min evolver

    FYNCH-BIO/hardware

    eVOLVER Hardware (PCB, 3D printed parts)

    72 parts12
  • 4 layers33 × 66 mmEVolver pwm, the printed circuit board in 3D

    EVolver pwm

    FYNCH-BIO/hardware

    eVOLVER Hardware (PCB, 3D printed parts)

    66 parts12
  • 4 layers203.2 × 101.6 mmPressure module, the printed circuit board in 3D

    Pressure module

    FYNCH-BIO/hardware

    eVOLVER Hardware (PCB, 3D printed parts)

    39 parts12
  • 4 layers266.7 × 123.2 mmAuxiliary Board, the printed circuit board in 3D

    Auxiliary Board

    FYNCH-BIO/hardware

    eVOLVER Hardware (PCB, 3D printed parts)

    36 parts12
  • 2 layers92.7 × 82.6 mmTemperature board, the printed circuit board in 3D

    Temperature board

    FYNCH-BIO/hardware

    eVOLVER Hardware (PCB, 3D printed parts)

    32 parts12
  • 2 layers65 × 56 mmPi Hat, the printed circuit board in 3D

    Pi Hat

    FYNCH-BIO/hardware

    eVOLVER Hardware (PCB, 3D printed parts)

    28 parts12
  • 2 layers49.5 × 58.4 mmVial Board, the printed circuit board in 3D

    Vial Board

    FYNCH-BIO/hardware

    eVOLVER Hardware (PCB, 3D printed parts)

    18 parts12
  • 4 layers33 × 22.9 mmRS485, the printed circuit board in 3D

    RS485

    FYNCH-BIO/hardware

    eVOLVER Hardware (PCB, 3D printed parts)

    18 parts12
  • 2 layers49.5 × 58.4 mmVial Board, the printed circuit board in 3D

    Vial Board

    FYNCH-BIO/hardware

    eVOLVER Hardware (PCB, 3D printed parts)

    17 parts12

Similar boards

  • 2 layers98 × 27 mmXy limit, the printed circuit board in 3D

    Xy limit

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    5 parts3.7k
  • 2 layers21 × 33 mm24g2usb pico2w, the printed circuit board in 3D

    24g2usb pico2w

    joypad-ai/joypad-os

    Universal controller firmware for building adapters, dongles, and custom controllers.

    5 parts1.7kApache-2.0
  • 2 layers53.2 × 59.6 mmA10 OLinuXino Lime Rev B SHIELD TEMPLATE, the printed circuit board in 3D

    A10 OLinuXino Lime Rev B SHIELD TEMPLATE

    OLIMEX/OLINUXINO

    OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

    5 parts1.5k
  • 2 layers30 × 11 mmMain control board servo tester, the printed circuit board in 3D

    Main control board servo tester

    jamro/tiny-engineer

    A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

    5 parts1.1k
  • 2 layers78.8 × 35.3 mmKiCadTest, the printed circuit board in 3D

    KiCadTest

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    5 parts915
  • 2 layers50 × 23 mmMiniCircuits LTCC, the printed circuit board in 3D

    MiniCircuits LTCC

    VanceVagell/kv4p-ht

    Open source handheld ham radio project KV4P-HT

    5 parts828GPL-3.0
  • 2 layers20.3 × 15.2 mmL0 light sensor, the printed circuit board in 3D

    L0 light sensor

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    5 parts546MIT

Questions

How big is the Flow rate PCB?

It measures 20.6 × 16.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Flow rate use?

5 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Flow rate KiCad files?

From the FYNCH-BIO/hardware repository on GitHub, at the commit this page was made from: the board is Accessories/flow-rate-aux-board/v2v_flow_emitter/flow_rate/flow_rate.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Flow rate design in my own project?

Its repository states no licence, so its author keeps all rights: ask FYNCH-BIO before reusing the design.