
SevenSegmentInputModule
cscott/SevenSegmentInputModule
7-segment display input module for Framework 16

planck 4x6 keyboard pcb
Planck is an open-source printed circuit board by fxliang, from the fxliang/planck4x6 repository on GitHub. It is a 2-layer board of 115 × 75 mm with 142 parts on 116 nets, routed with 843 tracks and 254 vias.
It is built around the W25Q16JVUXIQ, ME6219C33M5G and WS2812B, with the U262-161N-4BVC11 and DSHP02TSGET among its other parts. Its parts include 48 diodes, 40 capacitors, 26 switches, 11 resistors and 5 ICs. It belongs with the RP2040 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 34 | 100nF ±10% 25V 0201 | Resistor_SMD:R_0201_0603Metric | C10, C11, C12, C13, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25, C26 +18 |
| 24 | 1N4148W,100V 150mA 4ns T4 | Diode_SMD:D_SOD-123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +8 |
| 24 | SW_Hotswap_Kailh_Choc_V1_1u | Switch_Keyboard_Kailh:SW_Hotswap_Kailh_Choc_V1 | SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +8 |
| 24 | WS2812B | MCU_RaspberryPi_and_Boards:WS2812_6028_REV_S | D25, D26, D27, D28, D29, D30, D31, D32, D33, D34, D35, D36, D37, D38, D39, D40 +8 |
| 6 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4, H5, H6 |
| 4 | 1kΩ ±1% 50mW 0201 | Resistor_SMD:R_0201_0603Metric | R3, R4, R7, R9 |
| 4 | 27Ω ±1% 50mW 0201 | Resistor_SMD:R_0201_0603Metric | R5, R6, R10, R11 |
| 3 | USB_C_U262-161N-4BVC11 | josh-connectors:USB_C_TYPE-C-31-M-14 | J1, J2, J3 |
| 2 | 1uF ±20% 6.3V 0201 | Capacitor_SMD:C_0201_0603Metric | C6, C14 |
| 2 | 2.2uF ±10% 10V | Resistor_SMD:R_0201_0603Metric | C1, C2 |
| 2 | 22pF ±5% 50V 0603 | Resistor_SMD:R_0201_0603Metric | C3, C4 |
| 2 | 5.1k 0201 | Resistor_SMD:R_0201_0603Metric | R1, R2 |
| 2 | Fiducial | Fiducial:Fiducial_0.5mm_Mask1.5mm | FID1, FID2 |
| 1 | 10kΩ ±1% 50mW 0201 | Resistor_SMD:R_0201_0603Metric | R8 |
| 1 | 32MHz ±10ppm 20pF SMD3225-4P | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | DSHP02TSGET | Switches:DSHP02TSGET | SW26 |
| 1 | ME6219C33M5G | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | RP2040 ARM Cortex-M0 133MHz | MCU_RaspberryPi_and_Boards:RP2040-QFN-56 | U1 |
| 1 | SW_Push | Switches:B3U-1000P | SW25 |
| 1 | W25Q16JVUXIQ | Package_SON:SON-8-1EP_3x2mm_P0.5mm_EP1.4x1.6mm | U3 |
| 1 | bcase | MCU_RaspberryPi_and_Boards:bcase | U4 |
| 1 | tcase | MCU_RaspberryPi_and_Boards:tcase | U5 |

cscott/SevenSegmentInputModule
7-segment display input module for Framework 16




gallicchio/AMOD-and-RFMOD
The tutorial's 2x12 adapter (/mudd/133electronics/icepi-zero-dac-adc/adapterboard/) with a 2 x 6 right-angle Pmod socket on a 15 mm extension of its right-hand end, so an Icepi Zero can drive AMOD-A's and RF-MOD's Pmod…

LEDs-by-glowingkitty/GlowSign
A battery powered LED sign for your laptop, or where ever else you want to use it!

sequoia-hope/rp2350-motor-controller
An RP2350 based brushless motor controller

MoreThanRobotsFR/MTR_Tiny_MD
This Arduino project utilizes SimpleFOC library for sensor-based brushless motor control with a DRV8316 driver. It also incorporates an Adafruit NeoPixel for visual feedback.
It measures 115 × 75 mm and has 2 copper layers, 1.6 mm thick.
142 parts, built around the W25Q16JVUXIQ, ME6219C33M5G, WS2812B and U262-161N-4BVC11. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the fxliang/planck4x6 repository on GitHub, at the commit this page was made from: the board is planck.kicad_pcb and its schematic planck.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask fxliang before reusing the design.