2 layers116.8 × 30 mm
Type d
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
14 parts3kApache-2.0
2 layers50.5 × 26.7 mm
BenchComputerRelayDriver
futureshocked/bench_computer12Tech Explorations: Build a Bench Computer with a Raspberry Pi source code
- Size
- 50.5 × 26.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 8
- Pads
- 25
- Tracks, vias
- 41, 0
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 3 Jun 2016
- Updated
- 20 Oct 2024
Overview
BenchComputerRelayDriver is an open-source printed circuit board by futureshocked, from the futureshocked/bench_computer repository on GitHub, published under the MIT licence. It is a 2-layer board of 50.5 × 26.7 mm with 14 parts on 8 nets, routed with 41 tracks and 0 vias.
Its parts include 3 connectors, 2 resistors, 1 IC, 1 diode and 1 transistor.
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | CONN_01X02 | Connect:bornier2 | P1:SIGNAL, P2:5V POWER |
| 2 | R | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | R1, R2 |
| 1 | 2N2222 | TO_SOT_Packages_THT:TO-92_Molded_Wide_Oval | Q1 |
| 1 | 5V/10A_relay | bench_computer:SONGLE_5V_Relay | U1 |
| 1 | CONN_01X03 | Connect:bornier3 | P3 |
| 1 | D | Diodes_ThroughHole:Diode_DO-41_SOD81_Horizontal_RM10 | D1 |
| 1 | LOGO | Kicad Logos:TE_Logo_12mm | G*** |
The 9 most common of 14 parts.
Questions
How big is the BenchComputerRelayDriver PCB?
It measures 50.5 × 26.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the BenchComputerRelayDriver use?
14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BenchComputerRelayDriver KiCad files?
From the futureshocked/bench_computer repository on GitHub, at the commit this page was made from: the board is Kicad/Kicad-RelayBoard_v1.1_kicad8/BenchComputerRelayDriver.kicad_pcb and its schematic Kicad/Kicad-RelayBoard_v1.1_kicad6/BenchComputerRelayDriver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the BenchComputerRelayDriver design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers32 × 22 mm
- 2 layers34 × 45 mm
2032Charger
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
14 parts915 - 2 layers34 × 109.9 mm
- 2 layers45.3 × 42.7 mm
- 2 layers42.5 × 28.8 mm
C5VRX JACK DIY
Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS
14 parts515GPL-3.0 - 2 layers54 × 47 mm
- 2 layers62 × 24 mm
