2 layers
Encoder
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
7 parts4.3kMIT
2 layers16.9 × 25 mm
Pd buddy wye
frohoff/pd-buddy-wye11From https://git.clarahobbs.com/pd-buddy/pd-buddy-wye.git
- Size
- 16.9 × 25 mm
- Copper layers
- 2
- Thickness
- 0.6 mm
- Parts
- 7
- Nets
- 46
- Pads
- 102
- Tracks, vias
- 126, 32
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 14 May 2019
- Updated
- 14 May 2019
Overview
Pd buddy wye is an open-source printed circuit board by frohoff, from the frohoff/pd-buddy-wye repository on GitHub. It is a 2-layer board of 16.9 × 25 mm with 7 parts on 46 nets, routed with 126 tracks and 32 vias.
Its parts include 3 connectors and 2 resistors.
README
README.mdPD Buddy Wye
Power/data splitter for PD Buddy Sink.
This PCB must be 0.6 mm thick so the USB Type-C card edge receptacles work. Copper thickness can be 1 or 2 oz, ENIG finish preferred.
The PCB is made with KiCad, so you'll need that if you want to make any changes. Several PCB fabricators accept KiCad PCB files directly now, but if you intend to order from one that does not, you'll need KiCad to plot the Gerbers.
KiCad 4 supports loading footprint libraries from Git repositories, but its
support for doing the same with symbol libraries is lacking. To address this,
I added the variable _KI_LIB_GIT. Set this path in the main KiCad window
(Preferences > Configure Paths) to point to a local copy of the
kicad-library repository to ensure that you're using the latest schematic
libraries.
License
PD Buddy Wye is Copyright (C) 2017-2018 Clayton G. Hobbs, and made available under the CERN Open Hardware Licence v1.2. See LICENSE for more information.
Parts
7| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 2 | M3 | Mounting_Holes:MountingHole_3.2mm_M3_Pad_Via | MK1, MK2 |
| 1 | DFP+Power | Connectors_USB:USB_C_Plug_Molex_105444 | P1 |
| 1 | Power | Connector_USB_C_PCBEdge:USB_C_Receptacle_PCBEdge_Alt_ShieldPads | J1 |
| 1 | UFP | Connector_USB_C_PCBEdge:USB_C_Receptacle_PCBEdge_Alt_ShieldPads | J2 |
Similar boards
- 2 layers40 × 20 mm
- 2 layers19.8 × 30 mm
- 2 layers35.6 × 58.2 mm
Display Carrier
AxxAxx/AxxSolder
STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power
7 parts1.7kGPL-3.0 - 2 layers20.3 × 16.3 mm
- 2 layers26 × 44 mm
Compact carrier board
jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.
7 parts1.1k - 2 layers26.4 × 53.8 mm
Atari pickup
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
7 parts1kGPL-3.0 - 2 layers
Questions
How big is the Pd buddy wye PCB?
It measures 16.9 × 25 mm and has 2 copper layers, 0.6 mm thick.
What parts does the Pd buddy wye use?
7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pd buddy wye KiCad files?
From the frohoff/pd-buddy-wye repository on GitHub, at the commit this page was made from: the board is pd-buddy-wye.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pd buddy wye design in my own project?
Its repository states no licence, so its author keeps all rights: ask frohoff before reusing the design.