Skip to the content
2 layers76 × 75 mmFrischluft pcb, the printed circuit board in 3D

Hardware we created for frischluft.works

Size
76 × 75 mm
Copper layers
2
Thickness
1.6 mm
Parts
21
Nets
46
Pads
117
Tracks, vias
287, 3
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
23 May 2021
Updated
23 May 2021

Overview

Frischluft pcb is an open-source printed circuit board by frischluft-works, from the frischluft-works/frischluft-hardware repository on GitHub. It is a 2-layer board of 76 × 75 mm with 21 parts on 46 nets, routed with 287 tracks and 3 vias.

Its parts include 6 connectors, 5 ICs, 1 capacitor, 1 diode and 1 switch. It belongs with the ESP32 boards of this library.

README

README.md

frischluft.works Hardware

Hardware we created for frischluft.works

Parts

21
QtyValueFootprintReferences
3NEOPIXELConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ1, J2, J5
1BuzzerBuzzer_Beeper:Buzzer_TDK_PS1240P02BT_D12.2mm_H6.5mmBZ1
1CP_SmallCapacitor_THT:CP_Radial_D8.0mm_P3.80mmC1
1Conn_Coaxial_PowerConnector_BarrelJack:BarrelJack_Wuerth_6941xx301002J6
1LED_BRGAco2ampel_pcb:rgb_led_10mmD1
1LOGOfrischluft_pcb:ohw_logo_25mmG***
1LOGOfrischluft_pcb:coronaG***
1LOGOfrischluft_pcb:os_logo2G***
1LOGOfrischluft_pcb:os_logoG***
1LOGOscd40:oxy_xxxG***
1R_Pack03co2ampel_pcb:R_Array_SIP6_swappedRN1
1SCD40scd40:scd40U5
1SSD 1306 DISPLAYfrischluft_pcb:ssd1306_moduleJ4
1SW_PushButton_Switch_THT:SW_Tactile_SPST_Angled_PTS645Vx58-2LFSSW1
1bmp180_bobfrischluft:bmp180_bobU2
1co2ampel_pcb-rescue_co2ampel_pcb-cache_MH-Z19C-co2ampel_pcb-cachefrischluft_pcb:MH-Z19CU4
1connector protoConnector_PinHeader_2.54mm:PinHeader_2x09_P2.54mm_VerticalJ3
1eht10 bobfrischluft:aht10-BOBU3
1mini_esp32co2ampel_pcb:ESP32_floU1

Similar boards

  • 2 layers28.3 × 39.8 mmLevelShifter, the printed circuit board in 3D

    LevelShifter

    gusmanb/logicanalyzer

    24 channel, 100Msps logic analyzer hardware and software

    21 parts5.1kGPL-3.0
  • 2 layers171.2 × 72.9 mmAmiga gfxcard before pour, the printed circuit board in 3D

    Amiga gfxcard before pour

    mntmn/amiga2000-gfxcard

    MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

    21 parts1k
  • 2 layers93.9 × 46 mmRectifier, the printed circuit board in 3D

    Rectifier

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    21 parts990GPL-3.0
  • 2 layers45.5 × 42.9 mmEsphome han reader, the printed circuit board in 3D

    Esphome han reader

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    21 parts915
  • 2 layers31.8 × 14.5 mmEsp prog, the printed circuit board in 3D

    Esp prog

    drandyhaas/KiCadRoutingTools

    A set of Python/Rust tools to aid routing in KiCad

    21 parts744MIT
  • 2 layers23.5 × 15.8 mmQuiverAttachPCB, the printed circuit board in 3D

    QuiverAttachPCB

    Arrow-air/project-quiver

    Project Quiver documentation, designs, and project artifacts.

    21 parts617CERN-OHL-S-2.0
  • 2 layers69.9 × 41.3 mmHeaterMeterLCD, the printed circuit board in 3D

    HeaterMeterLCD

    CapnBry/HeaterMeter

    HeaterMeter and LinkMeter Arduino BBQ Controller

    21 parts557MIT
  • 2 layers161.3 × 111.8 mmDoj, the printed circuit board in 3D

    Doj

    kelu124/echomods

    Open source ultrasound processing modules and building blocks

    21 parts463

Questions

How big is the Frischluft pcb PCB?

It measures 76 × 75 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Frischluft pcb use?

21 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Frischluft pcb KiCad files?

From the frischluft-works/frischluft-hardware repository on GitHub, at the commit this page was made from: the board is frischluft_pcb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Frischluft pcb design in my own project?

Its repository states no licence, so its author keeps all rights: ask frischluft-works before reusing the design.