4 layers97.2 × 82.7 mm
2 layers63.5 × 82.6 mm
ADS1219Module
freudenthal/ADS1219ModuleAn ADS1219 I2C module
- Size
- 63.5 × 82.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 92
- Nets
- 32
- Pads
- 221
- Tracks, vias
- 609, 99
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 20 Sep 2023
- Updated
- 20 Sep 2023
Overview
ADS1219Module is an open-source printed circuit board by freudenthal, from the freudenthal/ADS1219Module repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 63.5 × 82.6 mm with 92 parts on 32 nets, routed with 609 tracks and 99 vias.
It is built around the ADS1219IPW and 24FC01T-I/OT. Its parts include 35 resistors, 21 capacitors, 13 connectors, 9 diodes and 3 transistors.
Main components
2
ADS1219IPW
TSSOP-16-40℃~+125℃ 1.024MHz 15LSB 1kHz 2 2.3V~5.5V 24 315uA Built-in Built-in I2C Multiplexers、Power-on reset、Integrated modulator、Built-in digital filter Sigma-Delta Support Yes TSSOP-16 Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADC)
24FC01T-I/OT
SOT-23-5-40℃~+85℃ 1,000,000 cycles 1.7V~5.5V 1Kbit 1MHz 200 Years 5ms Hardware write protection function、Noise suppression function I2C SOT-23-5 EEPROM ROHSMicrochip TechnologyEEPROM
README
README.mdkicad_libs
My collection of KiCad component libraries
ADC_DAC
| Part | Manufacturer ID | Mouser ID | Footprint | Comments |
|---|---|---|---|---|
| ADS1219 | ADS1219IPWR | 595-ADS1219IPWR | TSSOP-16 |
Connectors
| Part | Manufacturer ID | Mouser ID | Footprint | Comments |
|---|
Power
| Part | Manufacturer ID | Mouser ID | Footprint | Comments |
|---|---|---|---|---|
| LT3042 Voltage Reg | LT3042EDD#PBF | 584-LT3042EDD#PBF | DFN-10 | |
| LT3042 Voltage Reg | LT3042EMSE#PBF | 584-LT3042EMSE#PBF | MSOP-10 | |
| LTM8063 Switching Reg | LTM8063IY#PBF | 584-LTM8063IYPBF | BGA-28 |
Parts
92| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | NSΩ | Resistor_SMD:R_0805_2012Metric | R2, R3, R19, R20, R21, R22, R24, R25, R27, R28, R30, R31, R33, R34, R35, R36 |
| 13 | 1uF | Capacitor_SMD:C_0805_2012Metric | C3, C4, C5, C7, C11, C12, C13, C14, C15, C16, C17, C18, C19 |
| 12 | 10kΩ | Resistor_SMD:R_0805_2012Metric | R4, R5, R6, R7, R8, R12, R13, R14, R17, R23, R26, R29 |
| 7 | 100V | Package_TO_SOT_SMD:SOT-23-3 | D2, D3, D6, D7, D8, D9, D10 |
| 6 | NS_Ferrite | Inductor_SMD:L_0805_2012Metric | FB4, FB5, FB6, FB7, FB8, FB9 |
| 4 | 0Ω | Resistor_SMD:R_0805_2012Metric | R1, R16, R18, R32 |
| 4 | Input | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J11, J12, J13, J14 |
| 4 | M3 | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | J1, J2, J3, J4 |
| 3 | 100uF | Capacitor_SMD:CP_Elec_8x11.9 | C1, C9, C10 |
| 3 | 10uF | Capacitor_SMD:C_0805_2012Metric | C2, C6, C8 |
| 3 | FerriteBead | Inductor_SMD:L_0805_2012Metric | FB1, FB2, FB3 |
| 2 | NSF | Capacitor_SMD:C_0805_2012Metric | C20, C21 |
| 2 | Q_NMOS_GSD | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 1 | 100kΩ | Resistor_SMD:R_0805_2012Metric | R11 |
| 1 | 10V | Diode_SMD:D_SOD-123 | D5 |
| 1 | 24FC01T-I/OT | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | 500Ω | Resistor_SMD:R_0805_2012Metric | R10 |
| 1 | 5Vin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | ADS1219 | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U3 |
| 1 | DCON | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J9 |
| 1 | I2C | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J7 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D4 |
| 1 | NS | Resistor_SMD:R_0805_2012Metric | R9 |
| 1 | Q_PMOS_GSD | Package_TO_SOT_SMD:SOT-23 | Q3 |
| 1 | REF | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J10 |
| 1 | VIn | TerminalBlock:TerminalBlock_bornier-3_P5.08mm | J8 |
Questions
How big is the ADS1219Module PCB?
It measures 63.5 × 82.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ADS1219Module use?
92 parts, built around the ADS1219IPW and 24FC01T-I/OT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ADS1219Module KiCad files?
From the freudenthal/ADS1219Module repository on GitHub, at the commit this page was made from: the board is ADS1219Module.kicad_pcb and its schematic ADS1219.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ADS1219Module design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers57.1 × 76.2 mm
- 2 layers50.8 × 50.8 mm
- 2 layers107.9 × 82.6 mm
- 2 layers78.1 × 50.2 mm
- 4 layers15.3 × 45.8 mm
ExtendedRangeSupply
esl-epfl/CHEEP-boards
This chewing gum board is designed to be an extended-range voltage supply + current measurement circuit, intended for connection to the main board through the male pin headers to both sides.
46 parts2 - 2 layers25 × 25 mm
- 2 layers
