
ControllerBoardSMDPSU
Fredovsky/B13B-Nixie-clock
Nixie clock made from F9057 Nixie tubes (B13B sockets).

Nixie clock made from F9057 Nixie tubes (B13B sockets).
NixieBoard is an open-source printed circuit board by Fredovsky, from the Fredovsky/B13B-Nixie-clock repository on GitHub. It is a 2-layer board of 139 × 34 mm with 14 parts on 49 nets, routed with 151 tracks and 0 vias.
It belongs with the lEDs and displays boards of this library.
Nixie clock made from F9057 Nixie tubes (B13B sockets).
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | F9057TUBE | NixieBoard:F9057PIN | N1, N2, N3, N4 |
| 3 | NixieBoard:2X08_325 | JP1, JP2, JP3 | |
| 3 | 47k | NixieBoard:R2010_334 | RA2, RA3, RA4 |
| 1 | NixieBoard:dummyfp0 | UNK_HOLE_0 | |
| 1 | NixieBoard:dummyfp2 | UNK_HOLE_2 | |
| 1 | NixieBoard:dummyfp1 | UNK_HOLE_1 | |
| 1 | 30k | NixieBoard:R2010_334 | RA1 |

Fredovsky/B13B-Nixie-clock
Nixie clock made from F9057 Nixie tubes (B13B sockets).

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!



Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS


It measures 139 × 34 mm and has 2 copper layers, 1.6 mm thick.
14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Fredovsky/B13B-Nixie-clock repository on GitHub, at the commit this page was made from: the board is Nixie Clock v1.1/PCB/KiCAD project/NixieBoard.kicad_pcb and its schematic Nixie Clock v1.1/PCB/KiCAD project/BackBoard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Fredovsky before reusing the design.