4 layers170.2 × 170.2 mm
Motherboard
MicroLind-Developers/microlind-hw
Hardware repository for the microlind project
128 partsCERN-OHL-P-2.0
2 layers252.7 × 106.7 mm
PCB - CPU V1
FredericSegard/6309-Unleashed3Project LogicSpark-09, an old CPU but a favorite
- Size
- 252.7 × 106.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 97
- Nets
- 220
- Pads
- 928
- Tracks, vias
- 4,605, 347
- Pours
- 1,700
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 10 Jan 2024
- Updated
- 5 Dec 2024
Overview
PCB - CPU V1 is an open-source printed circuit board by FredericSegard, from the FredericSegard/6309-Unleashed repository on GitHub. It is a 2-layer board of 252.7 × 106.7 mm with 97 parts on 220 nets, routed with 4,605 tracks and 347 vias.
It is built around the ATF22V10C-7PX, MAX232N and 74HCT245, with the 74HCT257D, 74HCT273D and 74HCT373D among its other parts. Its parts include 44 capacitors, 29 ICs, 7 resistors, 5 diodes and 4 connectors. It belongs with the FPGA and CPLD boards of this library.
Main components
12
ATF22V10C-7PX
PDIP-245V EEPLD PDIP-24 Programmable Logic Device (CPLDs/FPGAs) ROHSMicrochip TechnologyProgrammable Logic Device (CPLDs/FPGAs)
MAX232N
PDIP-160℃~+70℃ 120Kbps 2 2 4.5V~5.5V Transceiver PDIP-16 RS232 ICs ROHSTexas InstrumentsRS232 ICs
74HCT245
DIP-20-40℃~+85℃ 28ns@4.5V 4.5V~5.5V 6mA 6mA 74HCT 8 8uA Bidirectional TTL-compatible CMOS Tri-State DIP-20 Buffers, Drivers, Receivers, Transceivers ROHSWuxi I-core Elec74 Series
74HCT257D
SO-16-40℃~+125℃ 16ns@4.5V,50pF 4.5V~5.5V 74HCT 8uA Tri-state output SO-16 Signal Switches, Multiplexers, Decoders ROHSNexperiaSignal Switches / Encoders & Decoders / Multiplexers
74HCT273D
SOIC-20-300mil-40℃~+125℃ 12ns 3.5pF 30ns@4.5V,50pF 36MHz 3ns 4.5V~5.5V 4mA 5.2mA 74HCT Series 8 8uA D-Type Reset Rising Edge SOIC-20-300mil Flip Flops ROHSNexperiaFlip Flops74HCT373D
SO-20-300mil-40℃~+125℃ 12ns 160uA 17ns 4.5V~5.5V 4ns 6mA 6mA 74HCT 8 D Latch Tri-State SO-20-300mil Latches ROHSNexperiaLatches
74HCT112D
SOIC-16-40℃~+125℃ 1 2 3.5pF 35ns@4.5V,50pF 4.5V~5.5V 4mA 4mA 4uA 64MHz 74HCT Series 7ns 7ns Asynchronous Complementary Falling Edge JK-Type Set and Reset SOIC-16 Flip Flops ROHSNexperiaFlip Flops
74HCT132D
SO-14-40℃~+125℃ 1.9V~2.1V 2 2uA 3.7V~4.4V 33ns@4.5V,50pF 4 4.5V~5.5V 400mV 4mA 4mA 74HCT Series NAND Gate SOIC-14 Logic Gates ROHSNexperiaLogic Gates74HCT14D
SOP-14-40℃~+125℃ 1 1.9V~2.1V 2uA 34ns@4.5V,50pF 4.4V 4.5V~5.5V 400mV 4mA 4mA 500mV~600mV 6 74HCT Schmitt trigger SOIC-14 Inverters ROHSNexperiaInverters74HCT157D
SO-16-40℃~+125℃ 160uA 16ns@4.5V,50pF 4.5V~5.5V 4mA 4mA 74HCT 8/4 Multiplexer Single Supply SOIC-16 Signal Switches, Multiplexers, Decoders ROHSNexperiaSignal Switches, Multiplexers, Decoders74HCT32D
SO-14-40℃~+125℃ 2 24ns@4.5V,50pF 2V 2uA 3.7V、4.4V 4 4.5V~5.5V 400mV 4mA 4mA 74HCT Series 800mV OR Gate SOIC-14 Logic Gates ROHSNexperiaGates74HCT573D
SO-20-300mil-40℃~+125℃ 13ns 20ns 4.5V~5.5V 74HCT 8 8uA 9ns D Latch Tri-State SOIC-20 Latches ROHSNexperiaLatches
README
README.md6309_Unleashed
Project LogicSpark-09, an old CPU but a favorite.
Parts
97| Qty | Value | Footprint | References |
|---|---|---|---|
| 39 | 1µF | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C2, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24 +23 |
| 4 | 10µF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C6, C7, C8, C9 |
| 4 | AS6C4008 | Package_DIP:DIP-32_W15.24mm_Socket | U5, U6, U7, U8 |
| 4 | ATF22V10C | Package_DIP:DIP-24_W7.62mm_Socket | U10, U11, U14, U29 |
| 2 | 1K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R5, R6 |
| 2 | 3K3 | Resistor_THT:R_Array_SIP9 | RN2, RN3 |
| 2 | 3K3 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R4 |
| 2 | 74HCT257 | Package_DIP:DIP-16_W7.62mm_Socket | U23, U27 |
| 2 | 74HCT273 | Package_DIP:DIP-20_W7.62mm_Socket | U20, U25 |
| 2 | 74HCT373 | Package_DIP:DIP-20_W7.62mm_Socket | U21, U26 |
| 2 | MAX232 | Package_DIP:DIP-16_W7.62mm_Socket | U16, U18 |
| 2 | R65C51 | Package_DIP:DIP-28_W15.24mm_Socket | U17, U19 |
| 1 | +5V DC | 0_Library:Barrel_Jack_5.5mmODx2.1mmID_PJ-202A | J2 |
| 1 | 1.8432MHz | Oscillator:Oscillator_DIP-8 | X2 |
| 1 | 100µF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C1 |
| 1 | 150 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R7 |
| 1 | 16-Bit ISA | 0_Library:BUS_AT v2 | J1 |
| 1 | 16MHz | Oscillator:Oscillator_DIP-8 | X1 |
| 1 | 220 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2 |
| 1 | 330 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R3 |
| 1 | 3K3 | Resistor_THT:R_Array_SIP5 | RN1 |
| 1 | 74HCT112 | Package_DIP:DIP-16_W7.62mm_Socket | U4 |
| 1 | 74HCT132 | Package_DIP:DIP-14_W7.62mm_Socket | U1 |
| 1 | 74HCT14 | Package_DIP:DIP-14_W7.62mm_Socket | U2 |
| 1 | 74HCT157 | Package_DIP:DIP-16_W7.62mm_Socket | U22 |
| 1 | 74HCT245 | Package_DIP:DIP-20_W7.62mm_Socket | U28 |
| 1 | 74HCT32 | Package_DIP:DIP-14_W7.62mm_Socket | U13 |
| 1 | 74HCT573 | Package_DIP:DIP-20_W7.62mm_Socket | U15 |
| 1 | 74HCT74 | Package_DIP:DIP-14_W7.62mm_Socket | U3 |
| 1 | COM1: DCE | Connector_Dsub:DSUB-9_Female_Horizontal_P2.77x2.84mm_EdgePinOffset4.94mm_Housed_MountingHolesOffset7.48mm | J3 |
| 1 | COM2: DTE | Connector_Dsub:DSUB-9_Male_Horizontal_P2.77x2.84mm_EdgePinOffset4.94mm_Housed_MountingHolesOffset7.48mm | J4 |
| 1 | DS1813 | Package_TO_SOT_THT:TO-92L_Inline_Wide | RS1 |
| 1 | HD6309E | Package_DIP:DIP-40_W15.24mm_Socket | U9 |
| 1 | HM62256 | Package_DIP:DIP-28_W15.24mm_Socket | U24 |
| 1 | MMU | LED_THT:LED_D3.0mm_Horizontal_O1.27mm_Z2.0mm | D5 |
| 1 | POWER | LED_THT:LED_D3.0mm_Horizontal_O1.27mm_Z2.0mm | D1 |
| 1 | POWER | 0_Library:Microswitch_4.7mm_spacing | SW1 |
| 1 | RESET | LED_THT:LED_D3.0mm_Horizontal_O1.27mm_Z2.0mm | D2 |
| 1 | RESET | Button_Switch_THT:SW_Tactile_SPST_Angled_PTS645Vx58-2LFS | SW2 |
| 1 | SST39SF010 | Package_DIP:DIP-32_W15.24mm_Socket | U12 |
| 1 | ~{HALT} | LED_THT:LED_D3.0mm_Horizontal_O1.27mm_Z2.0mm | D4 |
| 1 | ~{IRQ} | LED_THT:LED_D3.0mm_Horizontal_O1.27mm_Z2.0mm | D3 |
Questions
How big is the PCB - CPU V1 PCB?
It measures 252.7 × 106.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PCB - CPU V1 use?
97 parts, built around the ATF22V10C-7PX, MAX232N, 74HCT245 and 74HCT257D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PCB - CPU V1 KiCad files?
From the FredericSegard/6309-Unleashed repository on GitHub, at the commit this page was made from: the board is PCB - CPU V1/PCB - CPU V1.kicad_pcb and its schematic Ep2 - Power, reset, clock and nop test/Ep2 - Power, reset, clock and nop test.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PCB - CPU V1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask FredericSegard before reusing the design.
Similar boards
- 4 layers100 × 100 mm
2 - CPU and core components (Rev 3)
FredericSegard/Fr80
Z80 Homebrew computer, code-named Fre80, pronounced Freddy.
56 parts2 - 2 layers127 × 127 mm
Morseboard-8088
ifilot/morseboard-8088
Single board computer designed around the 8088 processor
61 parts - 2 layers225.4 × 69.3 mm
Lt option clone
polpo/imagescribbler
A Clone of Apple's ImageWriter II/LQ LocalTalk Option card
49 parts14CC0-1.0 - 4 layers101.6 × 53.3 mm
- 2 layers56.3 × 82 mm
- 4 layers280 × 140 mm
P8x regbank card
ksr/p8x
Generated by generators/genkicad.py from the canonical geneagle netlist (CARDS["peripheral-card"]), same standard as the memory card: 4-layer (F/B signals, In1=GND, In2=VCC planes), a bypass cap above each IC, a…
113 parts - 2 layers100 × 100 mm
