Skip to the content
2 layers100 × 80 mmDist, the printed circuit board in 3D
Size
100 × 80 mm
Copper layers
2
Thickness
1.6 mm
Parts
28
Nets
22
Pads
27
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 8 (file 20240108)
Created
16 Jul 2026
Updated
15 Oct 2026

Overview

Dist is an open-source printed circuit board by FredandFZ, from the FredandFZ/Upwork_Benchmark repository on GitHub. It is a 2-layer board of 100 × 80 mm with 28 parts on 22 nets.

Its parts include 10 ICs, 8 connectors, 3 diodes, 2 resistors and 1 capacitor. It belongs with the ESP32 boards of this library.

Parts

28
QtyValueFootprintReferences
1Addressable LED Board ArrayLED_SMDD1
1Battery-Charge Status OutputConnector_GenericJ6
1Board Identification and Pin MarkingsConnector_GenericJ1
1Boot push buttonButton_Switch_SMD:SW_SPST_TL3301ANSW_BOOT
1Component SourceabilityPackage_GenericU1
1I2C Bus Electrical ConfigurationR_0603R1
1Interboard Power and Signal LinksJST-PH_2.0mm_4-pinJ2
1Main-Board Addressable-LED Power and LogicLED_SMDD3
1Main-Board Connector InventoryConnector_GenericJ3
1Main-Board ESP32 GPIO AssignmentsPackage_GenericU2
1Main-Board I2C Signal ConditioningR_0603R2
1Main-Board Local DecouplingC_0603C1
1Main-Board Panel Controls and InputsConnector_GenericJ4
1Main-Board Power Source OR-ingLED_SMDD2
1Main-Board Rail Current MonitoringPackage_GenericU3
1Main-Board Standalone USB PowerPackage_GenericU4
1Panel mode slide switchButton_Switch_SMD:SW_SPDT_CK_JS102011SAQNSW_MODE
1Panel touch/buttons/reset connectorConnector_JST:JST_GH_BM08B-GHS-TBT_1x08-1MP_P1.25mm_HorizontalJ_PANEL
1Power-Board AXP2101 TopologyPackage_GenericU5
1Power-Board Battery InterfaceConnector_GenericJ5
1Power-Board Battery ProtectionPackage_GenericU6
1Power-Board Battery Temperature MonitoringPackage_GenericU7
1Power-Board Layer StackPackage_GenericU8
1Power-Board Mechanical LayoutConnector_GenericJ7
1Power-Board Production PackagePackage_GenericU9
1Power-Board TVS ESD ProtectionPackage_GenericU10
1Power-Board USB-C ConnectorConnector_GenericJ8
1Switched 5V Boost SupplyPackage_GenericSW1

More from FredandFZ/Upwork_Benchmark

5
  • 2 layers100 × 80 mmDist, the printed circuit board in 3D

    Dist

    FredandFZ/Upwork_Benchmark

    24 parts
  • 2 layers100 × 50 mmDist, the printed circuit board in 3D

    Dist

    FredandFZ/Upwork_Benchmark

    18 parts
  • 2 layers100 × 80 mmDist, the printed circuit board in 3D

    Dist

    FredandFZ/Upwork_Benchmark

    14 parts
  • 2 layers100 × 80 mmDist, the printed circuit board in 3D

    Dist

    FredandFZ/Upwork_Benchmark

    10 parts

Similar boards

  • 2 layers44.5 × 72.7 mmOSO SWAT C1-jig, the printed circuit board in 3D

    OSO SWAT C1-jig

    joeycastillo/Sensor-Watch

    A board replacement for the classic Casio F-91W wristwatch

    28 parts2.1k
  • 2 layers95 × 54 mmEinkPDA screen, the printed circuit board in 3D

    EinkPDA screen

    TalismanDesign/PocketMage_PDA

    An E-Ink PDA device using the ESP32 S3.

    28 parts2kApache-2.0
  • 2 layers45 × 45 mmSmartbuttons, the printed circuit board in 3D

    Smartbuttons

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    28 parts915
  • 2 layers24.1 × 36.2 mmEsp32miniBT, the printed circuit board in 3D

    Esp32miniBT

    asterics/esp32_mouse_keyboard

    ESP32 implementation for HID over GATT Keyboard and Mouse (Bluetooth Low Energy). Including serial API for external modules (similar to Adafruit EZKey HID)

    28 parts911GPL-3.0
  • 2 layers34.8 × 12.2 mmInfnoise goldfingers, the printed circuit board in 3D

    Infnoise goldfingers

    waywardgeek/infnoise

    The world's easiest TRNG to get right

    28 parts854CC0-1.0
  • 2 layers55.9 × 99.1 mmStm32f0 disco Luos shield, the printed circuit board in 3D

    Stm32f0 disco Luos shield

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    28 parts546MIT
  • 2 layers88 × 25 mmEleLab v2 Frontpanel a, the printed circuit board in 3D

    EleLab v2 Frontpanel a

    Chrismettal/EleLab_v2

    Cheap DIY lab system for hobbyists and the tinkering folk

    28 parts531GPL-3.0

Questions

How big is the Dist PCB?

It measures 100 × 80 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Dist use?

28 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Dist KiCad files?

From the FredandFZ/Upwork_Benchmark repository on GitHub, at the commit this page was made from: the board is ccfa-workfiles/experiments/rq4-validation/projects/43214420/targets/43214420_T017/reference/working_delivery/dist/design.kicad_pcb and its schematic Datasets/PII_clean_project/43214420/deliverables/paid_18156583/IoT_Environmental_Monitoring_Device_Power/IoT_Environmental_Monitoring_Device_Power.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Dist design in my own project?

Its repository states no licence, so its author keeps all rights: ask FredandFZ before reusing the design.