

- Size
- 100 × 80 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 24
- Nets
- 18
- Pads
- 29
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 8 (file 20240108)
- Created
- 16 Jul 2026
- Updated
- 15 Oct 2026
Overview
Dist is an open-source printed circuit board by FredandFZ, from the FredandFZ/Upwork_Benchmark repository on GitHub. It is a 2-layer board of 100 × 80 mm with 24 parts on 18 nets.
Its parts include 9 ICs, 6 connectors, 3 diodes, 1 resistor and 1 switch. It belongs with the ESP32 boards of this library.
Parts
24| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 330kΩ | Resistor_SMD:R_0603_1608Metric | R_EN |
| 1 | 5V boost 1200mA | Package_DFN_QFN:WQFN-20-1EP_3x4mm_P0.4mm_EP1.65x2.65mm | U_BOOST |
| 1 | 74AHCT1G125 level shifter | Package_TO_SOT_SMD:SOT-23-5 | U_LS |
| 1 | Addressable LED Board Array | LED_SMD | D1 |
| 1 | Battery-Charge Status Output | Connector_Generic | J4 |
| 1 | Board Identification and Pin Markings | Connector_Generic | J1 |
| 1 | Component Sourceability | Package_Generic | U1 |
| 1 | ESP32-S3 controller | RF_Module:ESP32-S3-WROOM-1 | U_MCU |
| 1 | I2C Bus Electrical Configuration | R_0603 | R1 |
| 1 | Interboard Power and Signal Links | JST-PH_2.0mm_4-pin | J2 |
| 1 | Main-Board Addressable-LED Power and Logic | LED_SMD | D3 |
| 1 | Main-Board ESP32 GPIO Assignments | Package_Generic | U2 |
| 1 | Main-Board Power Source OR-ing | LED_SMD | D2 |
| 1 | Main-Board Standalone USB Power | Package_Generic | U3 |
| 1 | Power-Board AXP2101 Topology | Package_Generic | U4 |
| 1 | Power-Board Battery Interface | Connector_Generic | J3 |
| 1 | Power-Board Battery Protection | Package_Generic | U5 |
| 1 | Power-Board Battery Temperature Monitoring | Package_Generic | U6 |
| 1 | Power-Board Layer Stack | Package_Generic | U7 |
| 1 | Power-Board Mechanical Layout | Connector_Generic | J5 |
| 1 | Power-Board Production Package | Package_Generic | U8 |
| 1 | Power-Board TVS ESD Protection | Package_Generic | U9 |
| 1 | Power-Board USB-C Connector | Connector_Generic | J6 |
| 1 | Switched 5V Boost Supply | Package_Generic | SW1 |
More from FredandFZ/Upwork_Benchmark
5Similar boards
- 2 layers56 × 65 mm

SeaTalk1
dotnet/iot
This repo includes .NET Core implementations for various IoT boards, chips, displays and PCBs.
24 parts2.4kMIT - 2 layers26.2 × 45.5 mm

PL18 multiprotocol
pascallanger/DIY-Multiprotocol-TX-Module
Multiprotocol TX Module (or MULTI-Module) is a 2.4GHz transmitter module which controls many different receivers and models.
24 parts1.9kGPL-3.0 - 2 layers58 × 35.5 mm

- 2 layers144 × 58 mm

Breakout 80pin 1393476-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
24 parts1.2k - 2 layers21.6 × 19.5 mm

Micron Logo LED
DraftShift/StealthChanger
Tool changing system for Vorons and other front mount printer motion systems, not just stealthburner.
24 parts1.2kGPL-3.0 - 2 layers158 × 11 mm

Rainbow Matchstick
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
24 parts1.1kGPL-3.0 - 2 layers85.6 × 54 mm

TRACED wio1262-carrier
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
24 parts915 - 2 layers36 × 20 mm

Questions
How big is the Dist PCB?
It measures 100 × 80 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Dist use?
24 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Dist KiCad files?
From the FredandFZ/Upwork_Benchmark repository on GitHub, at the commit this page was made from: the board is ccfa-workfiles/experiments/rq4-validation/projects/43214420/targets/43214420_T015/reference/working_delivery/dist/design.kicad_pcb and its schematic Datasets/PII_clean_project/43214420/deliverables/paid_18156583/IoT_Environmental_Monitoring_Device_Power/IoT_Environmental_Monitoring_Device_Power.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Dist design in my own project?
Its repository states no licence, so its author keeps all rights: ask FredandFZ before reusing the design.



