

- Size
- 100 × 80 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 14
- Pads
- 16
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 8 (file 20240108)
- Created
- 16 Jul 2026
- Updated
- 15 Oct 2026
Overview
Dist is an open-source printed circuit board by FredandFZ, from the FredandFZ/Upwork_Benchmark repository on GitHub. It is a 2-layer board of 100 × 80 mm with 14 parts on 14 nets.
Its parts include 6 ICs, 4 connectors, 1 diode and 1 switch.
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 0Ω | Resistor_SMD:R_0603_1608Metric | R_SCL, R_SDA |
| 1 | Battery-Charge Status Output | LED_SMD | D1 |
| 1 | Component Sourceability | Package_Generic | U1 |
| 1 | I2C Bus Electrical Configuration | Package_Generic | U2 |
| 1 | Interboard Power and Signal Links | JST-PH_2.0mm_4-pin | J1 |
| 1 | Power-Board Battery Interface | Connector_Generic | J2 |
| 1 | Power-Board Battery Protection | Package_Generic | U3 |
| 1 | Power-Board Battery Temperature Monitoring | Package_Generic | U4 |
| 1 | Power-Board Layer Stack | Package_Generic | U5 |
| 1 | Power-Board Mechanical Layout | Connector_Generic | J3 |
| 1 | Power-Board TVS ESD Protection | Package_Generic | U6 |
| 1 | Power-Board USB-C Connector | Connector_Generic | J4 |
| 1 | Switched 5V Boost Supply | Package_Generic | SW1 |
More from FredandFZ/Upwork_Benchmark
5Similar boards
- 2 layers116.8 × 30 mm

Type d
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
14 parts3kApache-2.0 - 2 layers32 × 22 mm

- 2 layers34 × 45 mm

2032Charger
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
14 parts915 - 2 layers34 × 109.9 mm

- 2 layers45.3 × 42.7 mm

- 2 layers42.5 × 28.8 mm

C5VRX JACK DIY
Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS
14 parts515GPL-3.0 - 2 layers54 × 47 mm

- 2 layers62 × 24 mm

Questions
How big is the Dist PCB?
It measures 100 × 80 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Dist use?
14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Dist KiCad files?
From the FredandFZ/Upwork_Benchmark repository on GitHub, at the commit this page was made from: the board is ccfa-workfiles/experiments/rq4-validation/projects/43214420/targets/43214420_T009/reference/working_delivery/dist/design.kicad_pcb and its schematic Datasets/PII_clean_project/43214420/deliverables/paid_18156583/IoT_Environmental_Monitoring_Device_Power/IoT_Environmental_Monitoring_Device_Power.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Dist design in my own project?
Its repository states no licence, so its author keeps all rights: ask FredandFZ before reusing the design.



