Skip to the content
2 layers76.2 × 49.5 mmOric ES, the printed circuit board in 3D

Extensions pour ORIC1-ATMOS

Size
76.2 × 49.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
11
Nets
67
Pads
134
Tracks, vias
434, 4
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
6 Apr 2022
Updated
20 Sep 2026

Overview

Oric ES is an open-source printed circuit board by Fred72z, from the Fred72z/ORIC repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 76.2 × 49.5 mm with 11 parts on 67 nets, routed with 434 tracks and 4 vias.

It is built around the BAT85. Its parts include 2 capacitors, 2 ICs, 2 connectors and 1 diode. It belongs with the FPGA and CPLD boards of this library.

Main components

1

README

README.md

BUS ORIC

Ensemble de platines pouvant se connecter sur un boitier principal connecté au port EXPANSION de l'oric.

EXP CARTOUCHE

Extension permettant de remplacer la ROM interne par une cartouche ROM externe

TELESTRAT II et TELESTRAT III

Nouvelles machines TELESTRAT. (Dans la série si vous ne pouvez pas la trouver, faites la vous-même :)).

Parts

11
QtyValueFootprintReferences
4MountingHoleMountingHole:MountingHole_3.2mm_M3_DIN965_PadH1, H2, H3, H4
1100nFCapacitor_THT:C_Ceramic_D5.5mm_W4mm_P5.00mmC2
147µFCapacitor_THT:CP_Radial_D5.0mm_P2.54mm_HorizontalC1
182C55Package_DIP:DIP-40_W15.24mm_LongPadsU2
1BAT85Diode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD1
1GAL16V8Package_DIP:DIP-20_W7.62mm_LongPadsU1
1I/OConnector_IDC:IDC-Header_2x15_P2.54mm_HorizontalJ2
1SLOT1Connector_IDC:IDC-Header_2x17_P2.54mm_HorizontalJ1

More from Fred72z/ORIC

12
  • 2 layers170 × 170 mmTELESTRAT2, the printed circuit board in 3D

    TELESTRAT2

    Fred72z/ORIC

    Extensions pour ORIC1-ATMOS

    160 parts5GPL-2.0
  • 2 layers272.2 × 107.8 mmKeyboard, the printed circuit board in 3D

    Keyboard

    Fred72z/ORIC

    Extensions pour ORIC1-ATMOS

    72 parts5GPL-2.0
  • 2 layers76.2 × 49.5 mm8ESN, the printed circuit board in 3D

    8ESN

    Fred72z/ORIC

    Extensions pour ORIC1-ATMOS

    37 parts5GPL-2.0
  • 2 layers76.2 × 49.5 mm8EA, the printed circuit board in 3D

    8EA

    Fred72z/ORIC

    Extensions pour ORIC1-ATMOS

    30 parts5GPL-2.0
  • 2 layers76.2 × 49.5 mmMEA8000, the printed circuit board in 3D

    MEA8000

    Fred72z/ORIC

    Extensions pour ORIC1-ATMOS

    25 parts5GPL-2.0
  • 2 layers76.2 × 49.5 mmACIA USB, the printed circuit board in 3D

    ACIA USB

    Fred72z/ORIC

    Extensions pour ORIC1-ATMOS

    18 parts5GPL-2.0
  • 2 layers76.2 × 49.5 mmACIA RS232, the printed circuit board in 3D

    ACIA RS232

    Fred72z/ORIC

    Extensions pour ORIC1-ATMOS

    17 parts5GPL-2.0
  • 2 layers76.2 × 94.6 mmOric BUS, the printed circuit board in 3D

    Oric BUS

    Fred72z/ORIC

    Extensions pour ORIC1-ATMOS

    17 parts5GPL-2.0
  • 2 layers76.2 × 49.5 mmRTC, the printed circuit board in 3D

    RTC

    Fred72z/ORIC

    Extensions pour ORIC1-ATMOS

    15 parts5GPL-2.0
  • 2 layers76.2 × 49.5 mmEREBUS, the printed circuit board in 3D

    EREBUS

    Fred72z/ORIC

    Extensions pour ORIC1-ATMOS

    13 parts5GPL-2.0
  • 2 layers65.7 × 22.2 mmFront USB, the printed circuit board in 3D

    Front USB

    Fred72z/ORIC

    Extensions pour ORIC1-ATMOS

    11 parts5GPL-2.0
  • 2 layers76.7 × 24.4 mmConnectors, the printed circuit board in 3D

    Connectors

    Fred72z/ORIC

    Extensions pour ORIC1-ATMOS

    8 parts5GPL-2.0

Similar boards

  • 2 layers213 × 65.1 mmSizif512, the printed circuit board in 3D

    Sizif512

    UzixLS/zx-sizif-512

    ZX Spectrum CPLD-based clone for rubber case

    214 parts195MIT
  • 2 layers111.3 × 106.4 mmSuper Sixteen v1, the printed circuit board in 3D

    Super Sixteen v1

    matthewcieplak/super-sixteen

    Code and schematics for the Super Sixteen Eurorack sequencer

    141 parts171
  • 2 layers66 × 99 mmNucleo32TNC, the printed circuit board in 3D

    Nucleo32TNC

    mobilinkd/NucleoTNC

    The Nucleo TNC is a breadboard implementation of the Mobilinkd TNC3 using a STM32L432KC Nucleo32 board. This TNC faithfully implements the audio section and EEPROM storage of the TNC3.

    54 parts110GPL-3.0
  • 2 layers28.6 × 36.8 mmZXROM-4in1, the printed circuit board in 3D

    ZXROM-4in1

    pmandes/zx-spectrum-issue6a-replica

    ZX Spectrum 48k Issue 6A board replica

    9 parts52
  • 2 layers140 × 85 mmSizif128, the printed circuit board in 3D

    Sizif128

    UzixLS/zx-sizif-128

    Easy-to-build minimalistic ZX Spectrum clone

    112 parts34MIT
  • 2 layers20 × 110 mmNode main, the printed circuit board in 3D

    Node main

    attoparsec/Node

    KiCAD project and Arduino code for the Node module

    47 parts19
  • 2 layers335 × 250 mmACE Board, the printed circuit board in 3D

    ACE Board

    acwright/6502-ACE

    6502-ACE 8-Bit Retro Computer Project

    205 parts12CERN-OHL-P-2.0
  • 2 layers36.4 × 31.8 mmMB9X UART, the printed circuit board in 3D

    MB9X UART

    famicomical/MB9X-UART

    In-system Serial Programming Adapter for Fujitsu F2MC-16LX microcontrollers

    15 parts6

Questions

How big is the Oric ES PCB?

It measures 76.2 × 49.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Oric ES use?

11 parts, built around the BAT85. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Oric ES KiCad files?

From the Fred72z/ORIC repository on GitHub, at the commit this page was made from: the board is BUS_ORIC/Extensions/24_ES_Numeriques/Kicad5/Oric_ES.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Oric ES design in my own project?

Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).