

Connectors
Extensions pour ORIC1-ATMOS
- Size
- 76.7 × 24.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 8
- Nets
- 23
- Pads
- 54
- Tracks, vias
- 83, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 6 Apr 2022
- Updated
- 20 Sep 2026
Overview
Connectors is an open-source printed circuit board by Fred72z, from the Fred72z/ORIC repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 76.7 × 24.4 mm with 8 parts on 23 nets, routed with 83 tracks and 0 vias.
Its parts include 4 connectors, 1 capacitor and 1 switch.
README
README.mdBUS ORIC
Ensemble de platines pouvant se connecter sur un boitier principal connecté au port EXPANSION de l'oric.
EXP CARTOUCHE
Extension permettant de remplacer la ROM interne par une cartouche ROM externe
TELESTRAT II et TELESTRAT III
Nouvelles machines TELESTRAT. (Dans la série si vous ne pouvez pas la trouver, faites la vous-même :)).
Parts
8| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | EXT | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2 |
| 1 | 100nF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C1 |
| 1 | MIDI/MODEM | Connector_IDC:IDC-Header_2x07_P2.54mm_Horizontal | J16 |
| 1 | MIDI/MODEM | Connector_PinHeader_2.54mm:PinHeader_2x07_P2.54mm_Vertical | J13 |
| 1 | NMI | Button_Switch_THT:SW_Tactile_SPST_Angled_PTS645Vx58-2LFS | SW1 |
| 1 | PAD_LEFT | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J14 |
| 1 | PAD_LEFT | Connector_Dsub:DSUB-9_Male_Horizontal_P2.77x2.84mm_EdgePinOffset8mm_Housed_MountingHolesOffset9.2mm | J15 |
More from Fred72z/ORIC
12- 2 layers170 × 170 mm

- 2 layers272.2 × 107.8 mm

- 2 layers76.2 × 49.5 mm

- 2 layers76.2 × 49.5 mm

- 2 layers76.2 × 49.5 mm

- 2 layers76.2 × 49.5 mm

- 2 layers76.2 × 49.5 mm

- 2 layers76.2 × 94.6 mm

- 2 layers76.2 × 49.5 mm

- 2 layers76.2 × 49.5 mm

- 2 layers76.2 × 49.5 mm

- 2 layers65.7 × 22.2 mm

Similar boards
- 2 layers20.5 × 24.8 mm

- 2 layers14.4 × 10.5 mm

OSO SWAB B1-00 Sensor Watch Accelerometer
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
8 parts2.1k - 2 layers7.9 × 39.1 mm

Brain board STM32F407 SD wing it
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
8 parts1.2k - 2 layers59.9 × 25.7 mm

Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
8 parts1kGPL-3.0 - 2 layers52 × 12.6 mm

USB
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.
8 parts960Apache-2.0 - 2 layers87.5 × 48.5 mm

7 input macropad
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
8 parts915 - 2 layers36.2 × 63.1 mm

PicoMemcard pico
dangiu/PicoMemcard
Emulating PSX Memory Card (or controller) using a Raspberry Pi Pico
8 parts694GPL-3.0 - 2 layers36 × 10 mm

PCB4-PWR BTN Rev.A
OLIMEX/DIY-LAPTOP
Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop
8 parts578Apache-2.0
Questions
How big is the Connectors PCB?
It measures 76.7 × 24.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Connectors use?
8 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Connectors KiCad files?
From the Fred72z/ORIC repository on GitHub, at the commit this page was made from: the board is Telestrat_II/Kicad5/Connectors/Connectors.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Connectors design in my own project?
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).