

DRV8353S dev board
A small dev board for testing the DRV8353SM
- Size
- 100 × 70 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 146
- Nets
- 97
- Pads
- 512
- Tracks, vias
- 1,694, 517
- Pours
- 41
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 26 Feb 2021
- Updated
- 9 Mar 2021
Overview
DRV8353S dev board is an open-source printed circuit board by francis-walsh, from the francis-walsh/drv8353sm_dev repository on GitHub. It is a 4-layer board of 100 × 70 mm with 146 parts on 97 nets, routed with 1,694 tracks and 517 vias.
It is built around the CSD19502Q5B, BAT46 and BSS84. Its parts include 55 resistors, 37 capacitors, 7 transistors, 5 ICs and 4 inductors. It belongs with the microcontroller boards boards and the STM32 boards of this library.
Main components
3CSD19502Q5B
VSON-CLIP-8(6x5)-55℃~+150℃ 1 N-channel 1.202nF 157A 195W 2.7V 22pF 3.4mΩ@10V 4.87nF 48nC@10V 80V N-Channel VSON-CLIP-8(6x5) MOSFETs ROHSTexas InstrumentsMOSFETsBAT46
DO-35Schottky DiodesSTMicroelectronicsBSS84
SOT-23-55℃~+150℃ 1 P-Channel 130mA 2.8pF 24.6pF 2V 3.2Ω@5V 300mW 4.7pF 50V 590pC@10V SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETs
Parts
146| Qty | Value | Footprint | References |
|---|---|---|---|
| 29 | 0 | Resistor_SMD:R_0603_1608Metric | R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R22, R23, R24, R25, R40, R41 +13 |
| 18 | THT | DRV8353S_dev_board:keystone_5001 | CS, ENCA, ENCB, ENCC, GHA, GHB, GHC, GLA, GLB, GLC, I_A, I_B, I_C, MISO, MOSI, SCLK +2 |
| 16 | 2.2k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R5, R9, R10, R21, R26, R27, R28, R32, R33, R34, R35, R36 |
| 14 | 22nF | Capacitor_SMD:C_0603_1608Metric | C7, C8, C9, C10, C11, C17, C18, C19, C20, C21, C22, C23, C35, C36 |
| 9 | 1uF | Capacitor_SMD:C_0805_2012Metric | C2, C3, C14, C15, C16, C26, C28, C31, C37 |
| 6 | CSD19502 | DRV8353S_dev_board:CSD19502 | Q2, Q3, Q4, Q5, Q6, Q7 |
| 4 | 10uF | DRV8353S_dev_board:bridge_caps | C29, C30, C33, C34 |
| 4 | 10uF | Capacitor_SMD:C_1210_3225Metric | C12, C13, C24, C27 |
| 4 | 330 | Resistor_SMD:R_0603_1608Metric | R29, R30, R31, R56 |
| 4 | B3U | Button_Switch_SMD:SW_SPST_B3U-1000P | BRAKE, RESET, SDOW, SUP |
| 3 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C4, C5, C25 |
| 3 | 1k | Resistor_SMD:R_0603_1608Metric | R6, R7, R8 |
| 3 | 500u | Resistor_SMD:R_2512_6332Metric | R38, R39, R55 |
| 2 | 12pF | Capacitor_SMD:C_0603_1608Metric | C1, C6 |
| 2 | BAT46 | Diode_SMD:D_SOD-323 | D4, D5 |
| 2 | GN | LED_SMD:LED_0603_1608Metric | L3, L4 |
| 2 | RD | LED_SMD:LED_0603_1608Metric | L1, L2 |
| 2 | SMD | TestPoint:TestPoint_Pad_D1.0mm | +3V3, +5V0 |
| 1 | 47nF | Capacitor_SMD:C_0603_1608Metric | C32 |
| 1 | BSS84 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | DIP | Button_Switch_SMD:SW_DIP_SPSTx01_Slide_Copal_CHS-01A_W5.08mm_P1.27mm_JPin | MOT DIR |
| 1 | DRV8353SM | Package_DFN_QFN:QFN-40-1EP_6x6mm_P0.5mm_EP4.6x4.6mm_ThermalVias | U5 |
| 1 | ECS-33B | DRV8353S_dev_board:ECS-33B | U1 |
| 1 | EXT_CMD | Connector_JST:JST_EH_S4B-EH_1x04_P2.50mm_Horizontal | EXT UART |
| 1 | FB | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | HC_POWER | DRV8353S_dev_board:MOLEX_428202213 | HC_DC |
| 1 | LOGO | DRV8353S_dev_board:school_logo | G*** |
| 1 | MIC5283-3.3ML-TR | Package_DFN_QFN:DFN-8-1EP_3x3mm_P0.65mm_EP1.55x2.4mm | U3 |
| 1 | MIC5283-5.0ML-TR | Package_DFN_QFN:DFN-8-1EP_3x3mm_P0.65mm_EP1.55x2.4mm | U4 |
| 1 | MOT_LC | DRV8353S_dev_board:JST_S6B-ZR-SM4A-TF(LF)(SN) | ENCODER |
| 1 | PHASE | DRV8353S_dev_board:MOLEX_0428203213 | HC_AC |
| 1 | STM32F103TBUx | Package_DFN_QFN:QFN-36-1EP_6x6mm_P0.5mm_EP4.1x4.1mm | U2 |
| 1 | SWD | Connector_PinSocket_1.27mm:PinSocket_2x03_P1.27mm_Vertical | SWD |
The 142 most common of 146 parts.
Similar boards
- 4 layers352.3 × 159.3 mm

- 6 layers130 × 112.6 mm

- 2 layers61.8 × 59.5 mm

BHL S1 copied
eluluke/Quadruped-Robot
Open-source, 3D-printable, modular quadruped robot designed as a hardware platform for robotics education, controls development, kinematics, reinforcement learning, robotic vision, and future semi-commercial research…
96 partsApache-2.0 - 2 layers99.5 × 66.8 mm

- 2 layers100 × 100 mm

RecurBOY
cyberboy666/recurBOY
a rpi0 video-instrument – created in collaboration with Guergana Tzatchkova
35 parts122GPL-3.0 - 2 layers100 × 100 mm

Sync ope
cyberboy666/sync_ope
effect send + sync restoring circuit - adapted from a gael jaton design
78 parts52 - 2 layers148.8 × 132.2 mm

Usbflashprog
robsonsmartins/usbflashprog
A memory device programmer (Flash/EPROM/E2PROM) board and software, connected to PC by USB port.
125 parts36 - 2 layers74 × 34 mm

EMS Bus Gateway
mariusgreuel/EMS-Bus-Gateway
EMS Bus Gateway for Buderus Boilers to run EMS-ESP32
48 parts21GPL-3.0
Questions
How big is the DRV8353S dev board PCB?
It measures 100 × 70 mm and has 4 copper layers, 1.6 mm thick.
What parts does the DRV8353S dev board use?
146 parts, built around the CSD19502Q5B, BAT46 and BSS84. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DRV8353S dev board KiCad files?
From the francis-walsh/drv8353sm_dev repository on GitHub, at the commit this page was made from: the board is PCB/DRV8353S_dev_board/DRV8353S_dev_board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the DRV8353S dev board design in my own project?
Its repository states no licence, so its author keeps all rights: ask francis-walsh before reusing the design.