

Accesorio para Pimmodore
- Size
- 100 × 70 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 45
- Pads
- 143
- Tracks, vias
- 150, 4
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 21 Aug 2024
- Updated
- 9 Oct 2024
Overview
Pim is an open-source printed circuit board by fpereyra1976, from the fpereyra1976/64pimcontrols repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 100 × 70 mm with 13 parts on 45 nets, routed with 150 tracks and 4 vias.
Its parts include 4 connectors, 3 resistors, 1 IC and 1 diode. It belongs with the RP2040 boards of this library.
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_2.1mm | MountingHole:MountingHole_2.1mm | T1, T2, T3, T4 |
| 2 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2, R3 |
| 2 | DE9_Plug | Connector_Dsub:DSUB-9_Male_Horizontal_P2.77x2.84mm_EdgePinOffset4.94mm_Housed_MountingHolesOffset7.48mm | J1, J2 |
| 1 | 5 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | Conn_01x03_MountingPin | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J4 |
| 1 | Conn_01x20_Pin | Connector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_Vertical | J3 |
| 1 | LED_RGBA | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | D1 |
| 1 | RaspberryPi_Pico_W | Module_RaspberryPi_Pico:RaspberryPi_Pico_Common | U1 |
Similar boards
- 2 layers40 × 20 mm

- 2 layers74.9 × 49.5 mm

- 2 layers35 × 29 mm

MagSpoofTC
samyk/magspoof
A portable device that can spoof/emulate any magnetic stripe, credit card or hotel card "wirelessly", even on standard magstripe (non-NFC/RFID) readers.
13 parts4.2k - 2 layers20.6 × 23.6 mm

AO-03 signal amplifier
fossasia/pslab-scripts
Pocket Science Lab - Scripts for Sensor Experiments
13 parts1.6kApache-2.0 - 2 layers47 × 35.6 mm

- 2 layers95 × 95 mm

Cube batteryboard
willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels
13 parts1.1kGPL-3.0 - 2 layers15.2 × 20.3 mm

Pt100stick
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
13 parts1.1kGPL-3.0 - 2 layers53.9 × 23.2 mm

Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
13 parts1kGPL-3.0
Questions
How big is the Pim PCB?
It measures 100 × 70 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pim use?
13 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pim KiCad files?
From the fpereyra1976/64pimcontrols repository on GitHub, at the commit this page was made from: the board is pim.kicad_pcb and its schematic pim.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pim design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).