Skip to the content
2 layers101.6 × 76.2 mmPulse oximeter carrier, the printed circuit board in 3D

PIC AC meter, MAX30100 Arduino pulse-oximeter PCB, and ESP32 gate lock: firmware, circuits, simulations and verification evidence.

Size
101.6 × 76.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
14
Nets
18
Pads
78
Tracks, vias
2,860, 14
Routed
Yes
KiCad
KiCad 8 (file 20240108)
Created
16 Oct 2026
Updated
16 Oct 2026

Overview

Pulse oximeter carrier is an open-source printed circuit board by fouadiqbal, from the fouadiqbal/hardware-embedded-portfolio repository on GitHub. It is a 2-layer board of 101.6 × 76.2 mm with 14 parts on 18 nets, routed with 2,860 tracks and 14 vias.

Its parts include 6 connectors, 3 capacitors, 3 resistors and 1 transistor.

README

arduino-pulse-oximeter/pcb/README.md

MAX30100 carrier PCB v1

Native editable board: pulse_oximeter_carrier.kicad_pcb (KiCad 8 format), 101.6 x 76.2mm, two copper layers, 1.6mm board, 0.25mm signal traces, 1.8mm through-hole pads / 1.0mm drills. It uses module headers and discrete through-hole parts to keep the prototype inspectable.

Interfaces

  • J1/J2: classic Nano socket rows, 2.54mm pitch, 15.24mm row spacing. Component-side view places the Nano USB connector toward J5 (the LCD edge). See nano_socket_pinmap.csv; verify the exact module before assembly and check USB cable clearance.
  • J3: MAX30100 breakout connector, pins 1..4 = 3V3, GND, SDA_L, SCL_L. This is a defined carrier connector, not a universal module footprint.
  • J4: external bidirectional I2C translator wiring connector, pins 1..8 = 5V, GND, SDA_H, SCL_H, 3V3, GND, SDA_L, SCL_L. Use short wires to a suitable 2-channel translator; this is not a claim that all commercial translators share this pinout.
  • J5: LCD header, conventional pins 1..16. Data D0..D3 unconnected; R/W grounded; contrast via RV1; backlight via R3.
  • J6: small active piezo buzzer, 5V positive and transistor-switched return. Verify current and polarity.

Nano 3V3 must supply the chosen sensor breakout and translator. Verify its source capability (including clone differences); use an external regulated 3.3V supply if needed. Never connect an external source to a regulator output without a reviewed supply arrangement. The breakout must internally provide the MAX30100 core supply and have compatible low-side I2C pull-ups.

Design files and checks

connections.csv defines every pad, coordinate and net; bom.csv lists parts. pcb_preview.svg is the routed top/bottom review view. routing_report.json reports routing, independent connectivity, and track-to-pad clearance checks. Run python tools/generate_hardware.py from the suite root to regenerate.

The grid router is a design aid. Its connectivity and basic geometry checks do not replace KiCad DRC (including drill, annular ring, mask, silkscreen, clearances and manufacturing rules). Native KiCad DRC has not been run in this environment. Do not order boards from this file before that review; no manufacturing Gerbers are supplied.

Pin orientation/rail reference: official classic Nano pinout. Sensor-interface reference: Analog Devices MAX30100 datasheet.

Parts

14
QtyValueFootprintReferences
1100k base pulldownPortfolio:R2R2
1100n 3V3 bypassPortfolio:C2C2
1100n 5V bypassPortfolio:C1C1
110k LCD contrastPortfolio:RV1RV1
110u bulkPortfolio:C3C3
11k base resistorPortfolio:R1R1
1220 LCD backlightPortfolio:R3R3
12N2222 E-B-C (verify part)Portfolio:Q1Q1
1Active buzzer + -Portfolio:J6J6
1External I2C level shifterPortfolio:J4J4
1LCD 16x2Portfolio:J5J5
1MAX30100 breakoutPortfolio:J3J3
1Nano analog sidePortfolio:J2J2
1Nano digital sidePortfolio:J1J1

Similar boards

  • 2 layers116.8 × 30 mmType d, the printed circuit board in 3D

    Type d

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    14 parts3kApache-2.0
  • 2 layers32 × 22 mmDiff driver, the printed circuit board in 3D

    Diff driver

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    14 parts990GPL-3.0
  • 2 layers34 × 45 mm2032Charger, the printed circuit board in 3D

    2032Charger

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    14 parts915
  • 2 layers34 × 109.9 mmTdisplay s3, the printed circuit board in 3D

    Tdisplay s3

    landonr/homeThing

    Wifi Smart Home Remotes that run on ESPHome

    14 parts551GPL-3.0
  • 2 layers45.3 × 42.7 mmMainPcb, the printed circuit board in 3D

    MainPcb

    adamb314/ServoProject

    Getting the most out of your hobby servo

    14 parts545
  • 2 layers42.5 × 28.8 mmC5VRX JACK DIY, the printed circuit board in 3D

    C5VRX JACK DIY

    Twotoz/C5VRX

    Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS

    14 parts515GPL-3.0
  • 2 layers62 × 24 mmMai button, the printed circuit board in 3D

    Mai button

    whowechina/mai_pico

    Pico controller for Maimai

    14 parts475

Questions

How big is the Pulse oximeter carrier PCB?

It measures 101.6 × 76.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Pulse oximeter carrier use?

14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Pulse oximeter carrier KiCad files?

From the fouadiqbal/hardware-embedded-portfolio repository on GitHub, at the commit this page was made from: the board is arduino-pulse-oximeter/pcb/pulse_oximeter_carrier.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Pulse oximeter carrier design in my own project?

Its repository states no licence, so its author keeps all rights: ask fouadiqbal before reusing the design.