
Type d
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

PIC AC meter, MAX30100 Arduino pulse-oximeter PCB, and ESP32 gate lock: firmware, circuits, simulations and verification evidence.
Pulse oximeter carrier is an open-source printed circuit board by fouadiqbal, from the fouadiqbal/hardware-embedded-portfolio repository on GitHub. It is a 2-layer board of 101.6 × 76.2 mm with 14 parts on 18 nets, routed with 2,860 tracks and 14 vias.
Its parts include 6 connectors, 3 capacitors, 3 resistors and 1 transistor.
Native editable board: pulse_oximeter_carrier.kicad_pcb (KiCad 8 format), 101.6 x 76.2mm, two copper layers, 1.6mm board, 0.25mm signal traces, 1.8mm through-hole pads / 1.0mm drills. It uses module headers and discrete through-hole parts to keep the prototype inspectable.
nano_socket_pinmap.csv; verify the exact module before assembly and check USB cable clearance.Nano 3V3 must supply the chosen sensor breakout and translator. Verify its source capability (including clone differences); use an external regulated 3.3V supply if needed. Never connect an external source to a regulator output without a reviewed supply arrangement. The breakout must internally provide the MAX30100 core supply and have compatible low-side I2C pull-ups.
connections.csv defines every pad, coordinate and net; bom.csv lists parts. pcb_preview.svg is the routed top/bottom review view. routing_report.json reports routing, independent connectivity, and track-to-pad clearance checks. Run python tools/generate_hardware.py from the suite root to regenerate.
The grid router is a design aid. Its connectivity and basic geometry checks do not replace KiCad DRC (including drill, annular ring, mask, silkscreen, clearances and manufacturing rules). Native KiCad DRC has not been run in this environment. Do not order boards from this file before that review; no manufacturing Gerbers are supplied.
Pin orientation/rail reference: official classic Nano pinout. Sensor-interface reference: Analog Devices MAX30100 datasheet.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 100k base pulldown | Portfolio:R2 | R2 |
| 1 | 100n 3V3 bypass | Portfolio:C2 | C2 |
| 1 | 100n 5V bypass | Portfolio:C1 | C1 |
| 1 | 10k LCD contrast | Portfolio:RV1 | RV1 |
| 1 | 10u bulk | Portfolio:C3 | C3 |
| 1 | 1k base resistor | Portfolio:R1 | R1 |
| 1 | 220 LCD backlight | Portfolio:R3 | R3 |
| 1 | 2N2222 E-B-C (verify part) | Portfolio:Q1 | Q1 |
| 1 | Active buzzer + - | Portfolio:J6 | J6 |
| 1 | External I2C level shifter | Portfolio:J4 | J4 |
| 1 | LCD 16x2 | Portfolio:J5 | J5 |
| 1 | MAX30100 breakout | Portfolio:J3 | J3 |
| 1 | Nano analog side | Portfolio:J2 | J2 |
| 1 | Nano digital side | Portfolio:J1 | J1 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!



Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS


It measures 101.6 × 76.2 mm and has 2 copper layers, 1.6 mm thick.
14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the fouadiqbal/hardware-embedded-portfolio repository on GitHub, at the commit this page was made from: the board is arduino-pulse-oximeter/pcb/pulse_oximeter_carrier.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask fouadiqbal before reusing the design.