4 layers70 × 64.5 mm
4 layers32.5 × 148.3 mm
Radioboard dev
ForrestFire0/radioboard- Size
- 32.5 × 148.3 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 103
- Nets
- 87
- Pads
- 351
- Tracks, vias
- 795, 381
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 20 Jun 2024
- Updated
- 12 Aug 2024
Overview
Radioboard dev is an open-source printed circuit board by ForrestFire0, from the ForrestFire0/radioboard repository on GitHub. It is a 4-layer board of 32.5 × 148.3 mm with 103 parts on 87 nets, routed with 795 tracks and 381 vias.
It is built around the SAM-M10Q-00B, ACS722LLCTR-05AB-T and BGS13SN8E6327XTSA1, with the MCP73831T-2ACI/OT-HXY, TPS73733QDRBRQ1 and BH-18650-PC among its other parts. Its parts include 46 capacitors, 13 inductors, 12 resistors, 10 ICs and 8 connectors. It belongs with the STM32 boards of this library.
Main components
8
SAM-M10Q-00B
LGA-20Hot start acceleration LGA-20 GNSS Modules ROHSu-bloxGNSS Modules
ACS722LLCTR-05AB-T
SOIC-8-40℃~+150℃ 0.65mΩ 2400Vrms 264mV/A 3V~3.6V 5A 5us 80kHz Support SOIC-8 Current Sensors ROHSAllegro MicroSystems, LLCCurrent SensorsBGS13SN8E6327XTSA1
PG-TSNP-8-1PG-TSNP-8-1 SMT ROHSInfineon TechnologiesUncategorised
MCP73831T-2ACI/OT-HXY
SOT-23-5LBattery ManagementHXY MOSFET
TPS73733QDRBRQ1
VSON-8-EP(3x3)-40℃~+125℃@(Tj) 1 1A 25uA 3.3V 37dB@(10kHz) 5.5V 500mV@(1A) Fixed Over Current Protection、Over Temperature Protection、Enable Positive VSON-8-EP(3x3) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
BH-18650-PC
--40℃~+180℃ 18650 Battery holder - Button And Strip Battery Connector ROHSMPDButton And Strip Battery Connector
ECS-TXO-25CSMV-320-DY-TR
SMD2520-4P-30℃~+85℃ 1.7V~3.465V 2.5mA 32MHz Clipped sine wave ±2ppm SMD2520-4P Temperature Compensated Crystal Oscillators (TCXO) ROHSECSTemperature Compensated Crystal Oscillators (TCXO)
NX2016SA-32M-EXS00A-CS06465
SMD2016-4P10pF 32MHz 60Ω Crystal Oscillator ±10ppm SMD2016-4P Crystals ROHSNDKCrystals
Parts
103| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100nF | parts:C0402 | C9, C10, C23, C28, C32, C67, C77 |
| 6 | 4.7uF | parts:C0603 | C1, C3, C4, C26, C29, C35 |
| 6 | 68pF | Capacitor_SMD:C_0402_1005Metric | C2, C24, C25, C78, C80, C82 |
| 5 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3, J4, J5, J6, J9 |
| 4 | 220R | parts:R0402 | R2, R27, R28, R29 |
| 4 | 6.8pF | parts:C0402 | C5, C6, C30, C38 |
| 3 | 1nF | parts:C0402 | C71, C72, C73 |
| 3 | 68pF | parts:C0402 | C12, C13, C76 |
| 2 | 0 | Resistor_SMD:R_0402_1005Metric | R5, R6 |
| 2 | 0R | Inductor_SMD:L_0402_1005Metric | L9, L10 |
| 2 | 100nF | Capacitor_SMD:C_0402_1005Metric | C18, C37 |
| 2 | 10k | parts:R0603 | R4, R26 |
| 2 | 15pF | Capacitor_SMD:C_0402_1005Metric | C11, C14 |
| 2 | 16nH | Inductor_SMD:L_0402_1005Metric | L2, L3 |
| 2 | 270R | parts:R0402 | R3, R35 |
| 2 | 5.1pF | parts:C0402 | C43, C44 |
| 2 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1, J2 |
| 2 | ~ | parts:ICC_SOT886_XSON6 | U3, U4 |
| 2 | ~ | parts:SWI_C&K_Y78B23110FP__ITT_KMR231GLFS | B1, B4 |
| 2 | ~ | parts:LED_0603_OSRAM_LG-Q396-PS-35_GREEN_1A2K_H0P4 | LED1, LED4 |
| 1 | 10pF | parts:C0402 | C31 |
| 1 | 15µH | Inductor_SMD:L_0805_2012Metric | L13 |
| 1 | 18nH | Inductor_SMD:L_0402_1005Metric | L4 |
| 1 | 220nF | parts:C0402 | C27 |
| 1 | 2k | parts:R0402 | R1 |
| 1 | 3.6pF | Capacitor_SMD:C_0402_1005Metric | C16 |
| 1 | 3.6pF | parts:C0402 | C20 |
| 1 | 33nH | parts:IND_0402_MURATA_LQW15AN_H0P5 | L11 |
| 1 | 360R | parts:R0402 | R34 |
| 1 | 4.3pF | Capacitor_SMD:C_0402_1005Metric | C15 |
| 1 | 4.7pF | parts:C0402 | C19 |
| 1 | 470nF | parts:C0603 | C85 |
| 1 | 47nF | parts:C0402 | C74 |
| 1 | 47pF | parts:C0402 | C79 |
| 1 | 5.6pF | Capacitor_SMD:C_0402_1005Metric | C8 |
| 1 | 5.6pF | parts:C0402 | C7 |
| 1 | 56nH | Inductor_SMD:L_0402_1005Metric | L7 |
| 1 | 6.8nH | Inductor_SMD:L_0402_1005Metric | L5 |
| 1 | 68nH | Inductor_SMD:L_0402_1005Metric | L8 |
| 1 | 8.2nH | Inductor_SMD:L_0402_1005Metric | L6 |
| 1 | ACS722LLCTR-05AB-T | parts:SOIC127P600X175-8N | U13 |
| 1 | BGS13SN8E6327XTSA1 | parts:TSNP-8-1_INF | U8 |
| 1 | BH-18650-PC | parts:BAT_BH-18650-PC | BT1 |
| 1 | ECS-TXO-25CSMV-320-DY-TR | parts:OSC_ECS-TXO-25CSMV-320-DY-TR | Y1 |
| 1 | LOGO | LOGO | G*** |
| 1 | MAX17048G_T10 | parts:SON50P200X200X80-9N | U11 |
| 1 | MCP73831T-2ACI_OT | parts:SOT95P280X145-5N | U5 |
| 1 | NX2012SA-32.768K-STD-MUB-1 | parts:XTAL_NX2012SA_NDK | XTAL2 |
| 1 | NX2016SA-32M-EXS00A-CS06465 | parts:NX2016SA_NDK | XTAL1 |
| 1 | SAM-M10Q-00B | parts:SAM-M10Q_UBL | U2 |
| 1 | STM32WL55CCUx | Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U10 |
| 1 | TPS22917DBVR | parts:SOT95P280X145-6N | U1 |
| 1 | TPS73733QDRBRQ1 | parts:IC_DRV8601DRBT | U12 |
| 1 | ~ | Inductor_SMD:L_0402_1005Metric | L12 |
| 1 | ~ | parts:LED_0603_VISHAY_VLMS1300-GS08_RED_1A2K_H0P8 | LED2 |
| 1 | ~ | parts:CON_SAMTEC_SMA-J-P-X-ST-EM1 | CN12 |
| 1 | ~ | Inductor_SMD:L_0603_1608Metric | L1 |
The 99 most common of 103 parts.
Questions
How big is the Radioboard dev PCB?
It measures 32.5 × 148.3 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Radioboard dev use?
103 parts, built around the SAM-M10Q-00B, ACS722LLCTR-05AB-T, BGS13SN8E6327XTSA1 and MCP73831T-2ACI/OT-HXY. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Radioboard dev KiCad files?
From the ForrestFire0/radioboard repository on GitHub, at the commit this page was made from: the board is radioboard_dev/radioboard_dev.kicad_pcb and its schematic radioboard_dev/Arduino_extension_connectors.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Radioboard dev design in my own project?
Its repository states no licence, so its author keeps all rights: ask ForrestFire0 before reusing the design.
More from ForrestFire0/radioboard
1Similar boards
- 4 layers33 × 44 mm
LoRa ground station
epicgamer720/LoRa-ground-station
LoRa ground station for telemetry with my model rockets
56 parts - 4 layers95.3 × 62 mm
Processing board
N-Pulse/EMG-HW-MainBoard
This repository contains the PCB design of the EMG bracelet's main board used for EMG signal processing and decoding. Detailed description of the project can be found in the Documentation folder
135 partsCC-BY-4.0 - 4 layers90 × 36 mm
A2-routing candidate
bdini13/esp32-cc1101-multiband
Work-in-progress ESP32-WROOM-32E + CC1101 multiband PCB: software-selected 315/433/868/915 MHz paths. AI-assisted engineering draft; not manufacturing-ready.
107 parts1 - 4 layers117 × 77 mm
ProdDeck
arsovskiteodor/A.ProdDeck
Open-hardware macro pad (WIP): custom KiCad PCB with keys, encoders and a fader, plus firmware and a desktop configurator
69 parts - 4 layers122 × 66 mm
Kleinvoet
CMGeldenhuys/kleinvoet
Spatially-Distributed Temporally-Synchronised Infrasonic Recorder
189 parts3CERN-OHL-S-2.0 - 4 layers100 × 80 mm
Mouse joystick pcb
peterpolidoro/mouse-joystick-pcb
KiCad design, fabrication package and documentation for a single-axis mouse joystick controller board: RP2040, TMC5130A stepper driver, brake and torque front ends, a pyControl UART peripheral for the Janelia Dudman lab…
364 parts1 - 4 layers100 × 50 mm
Test
aidanbrzezinski/test
. ├─ 3D # STEP 3D model export ├─ Images # Pictures and renders │ ├─ kibotresources # External resources for KiBot │ ├─ colors # Color theme for KiCad │ ├─ fonts # Fonts used in the project │ ├─ scripts # External…
211 partsMIT - 4 layers40 × 40 mm
Tmc5160-usb
janelia-kicad/tmc5160-usb
A stepper controller and driver board combining a TMC5160 and RP2040.
103 parts