Skip to the content
2 layers100 × 46.5 mmTractive system status indicator, the printed circuit board in 3D

Tractive system status indicator

formulaslug/fs-5-schematics1

Electrical Design Repository for fs-5 schematics and PCBs

Size
100 × 46.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
38
Nets
34
Pads
136
Tracks, vias
147, 13
Pours
2
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
9 Jul 2026
Updated
7 Nov 2026

Overview

Tractive system status indicator is an open-source printed circuit board by formulaslug, from the formulaslug/fs-5-schematics repository on GitHub. It is a 2-layer board of 100 × 46.5 mm with 38 parts on 34 nets, routed with 147 tracks and 13 vias.

Its parts include 28 diodes, 8 resistors and 1 connector.

README

README.md

General Notes

  • Clone this repository recursively (git clone --recursive). If you didn't, be sure to initialize the submodule: git submodule init and git submodule update

Creating a project

  1. Install our Template Project to your local computer.
    • Kicad requires templates to be installed locally, but our template is stored in the template folder in this repo, so you'll need to copy the template folder to where Kicad expects it. To see where that is, press Preferences -> Configure Paths, and look for the value of KICAD_USER_TEMPLATE_DIR. Copy the template folder there.
  2. Create a new branch from main. Name your branch in-kebab-case
  3. Create a new Kicad project from template. Under "User Templates" you should now see our Formula Slug template listed! Navigate to fs-5-schematics in the dialog and name your project the same as your branch name (in-kebab-case). This should create a new folder for your project inside of fs-5-schematics.
  4. In the Schematic Editor, open File -> Schematic Setup -> Text Variables, and fill in the info for your board.
  5. Create an initial commit and get to work!

LV Standards

https://docs.google.com/document/d/1JF8Ld86JzdSsicxHTWAqBsUBFZuK-cVn7AItZKhkslQ/edit?usp=sharing

Working with the symbol, footprint, and 3d libraries

Should you have to make any edits (you will!), be sure to follow this procedure:

  1. Pull the submodule, to be sure you're working on the latest version: git submodule update
  2. Make your changes...
  3. Commit to the fs-components repo. You can do this with git cli by descending into the fs-components directory and using git commands from there.
  4. Push! Try to do this in the minimum time possible, because if you hold changes locally and someone else commits before you, you'll need to redo your changes due to merge conflicts.

Parts

38
QtyValueFootprintReferences
28LEDLED_SMD:LED_Avago_PLCC4_3.2x2.8mm_CW_3DMODELD1, D2, D3, D11, D12, D13, D14, D15, D16, D25, D26, D27, D28, D29, D30, D31 +12
4100Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR7, R8, R9, R10
2150Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR5, R6
260Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR1, R2
1Conn_01x06formula_slug_footprint_library:1054301106J1
1LOGOformula_slug_footprint_library:FORMULA SLUG largerG***

More from formulaslug/fs-5-schematics

4
  • 2 layers59 × 26 mmVectornav imu, the printed circuit board in 3D

    Vectornav imu

    formulaslug/fs-5-schematics

    Electrical Design Repository for fs-5 schematics and PCBs

    34 parts1
  • 2 layers144.4 × 133.8 mmTest module temp sense board, the printed circuit board in 3D

    Test module temp sense board

    formulaslug/fs-5-schematics

    Electrical Design Repository for fs-5 schematics and PCBs

    33 parts1
  • 2 layers142.6 × 70.4 mmTest module busbar board, the printed circuit board in 3D

    Test module busbar board

    formulaslug/fs-5-schematics

    Electrical Design Repository for fs-5 schematics and PCBs

    8 parts1
  • 2 layers64.5 × 18.5 mmAuxiliary test board, the printed circuit board in 3D

    Auxiliary test board

    formulaslug/fs-5-schematics

    Electrical Design Repository for fs-5 schematics and PCBs

    4 parts1

Similar boards

  • 2 layers85 × 115 mmOSO BOOK C1, the printed circuit board in 3D

    OSO BOOK C1

    joeycastillo/The-Open-Book

    For details on how to build, test and use Open Book, I've made documentation available here.

    38 parts8.1kCC-BY-SA-4.0
  • 2 layers38.1 × 12.7 mmVrs io 1, the printed circuit board in 3D

    Vrs io 1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    38 parts1.2k
  • 2 layers136 × 84 mmMacropad, the printed circuit board in 3D

    Macropad

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    38 parts915
  • 2 layers126.4 × 15.2 mmV5ProbeTop, the printed circuit board in 3D

    V5ProbeTop

    Architeuthis-Flux/JumperlessV5

    The next generation jumperless breadboard

    38 parts332
  • 2 layers66 × 25.4 mmArdmover Empfangsspule Yann, the printed circuit board in 3D

    Ardmover Empfangsspule Yann

    Ardumower/ardumower

    Develop an open source robotic lawn mower (HW+SW reference platform)

    38 parts282
  • 2 layers17.8 × 17.8 mmAltmode friend, the printed circuit board in 3D

    Altmode friend

    CRImier/MyKiCad

    My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

    38 parts253GPL-3.0
  • 2 layers51.4 × 61 mmWifi gb cart, the printed circuit board in 3D

    Wifi gb cart

    Staacks/wifi-game-boy-cartridge

    A WiFi cartridge for the original Game Boy.

    38 parts242
  • 2 layers125 × 97.2 mmBattoota, the printed circuit board in 3D

    Battoota

    AlaaSaadAbdo/battoota

    Keyboards

    38 parts188

Questions

How big is the Tractive system status indicator PCB?

It measures 100 × 46.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Tractive system status indicator use?

38 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Tractive system status indicator KiCad files?

From the formulaslug/fs-5-schematics repository on GitHub, at the commit this page was made from: the board is tractive-system-status-indicator/tractive-system-status-indicator.kicad_pcb and its schematic auxiliary-test-board/auxiliary-test-board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Tractive system status indicator design in my own project?

Its repository states no licence, so its author keeps all rights: ask formulaslug before reusing the design.