

- Size
- 400.1 × 101.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 191
- Nets
- 188
- Pads
- 797
- Tracks, vias
- 3,529, 164
- Pours
- 60
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 29 Aug 2022
- Updated
- 25 Aug 2026
Overview
Nova1200 is an open-source printed circuit board by ForgottenMachines, from the ForgottenMachines/Data-General-Nova repository on GitHub. It is a 2-layer board of 400.1 × 101.6 mm with 191 parts on 188 nets, routed with 3,529 tracks and 164 vias.
It is built around the 74LS42PC, 74LS173SC and 74LS257PC, with the 74LS02PC among its other parts. Its parts include 69 resistors, 37 diodes, 26 switches, 21 ICs and 17 capacitors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
474LS42PC
PDIP-16-55℃~+125℃ PDIP-16 Interface - SpecializedTexas InstrumentsInterface - Specialized74LS173SC
CDIP-160℃~+70℃ 10ns 10ns 28mA 30MHz 4 4.75V~5.25V 40ns@5V,15pF 74LS Series Asynchronous D-Type Reset Rising Edge Tri-State CDIP-16 Flip FlopsTexas InstrumentsFlip Flops74LS257PC
DIP-160℃~+70℃ 12mA 2.6mA 24mA 27ns@5V,150pF 4.75V~5.25V 74LS Output enable high-impedance、Tri-state output DIP-16 Signal Switches, Multiplexers, DecodersTexas InstrumentsSignal Switches, Multiplexers, Decoders74LS02PC
DIP-140℃~+70℃ 15ns@5V,15pF 2 2.7V 2V 4 4.75V~5.25V 400uA 500mV 74LS 800mV 8mA 8mA NOR Gate DIP-14 Logic Gates ROHSonsemiLogic Gates
Parts
191| Qty | Value | Footprint | References |
|---|---|---|---|
| 39 | 4K7 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23 +23 |
| 37 | LED_ALT | LED_THT:LED_D5.0mm_Clear | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +21 |
| 23 | 1K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R32, R39, R40, R41, R43, R45, R46, R47, R48, R49, R50, R52, R53, R54, R55, R57 +7 |
| 16 | SW_SPST | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW10, SW11, SW12, SW13, SW14, SW15, SW16 |
| 15 | CP1_Small | Capacitor_THT:CP_Radial_Tantal_D5.0mm_P5.00mm | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15 |
| 10 | 74LS173 | Package_DIP:DIP-16_W10.16mm | U5, U6, U7, U8, U9, U10, U11, U12, U13, U14 |
| 10 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad | PAD1, PAD2, PAD3, PAD4, PAD5, PAD6, PAD7, PAD8, PAD9, PAD10 |
| 10 | SW_SPDT_MSM | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | SW17, SW18, SW19, SW20, SW21, SW22, SW23, SW24, SW25, SW26 |
| 5 | 74LS257 | Package_DIP:DIP-16_W10.16mm | U1, U2, U3, U4, U15 |
| 4 | 1M | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R51, R65, R67, R68 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_Pad | PAD11, PAD12, PAD13, PAD14 |
| 3 | 74LS06 | Package_DIP:DIP-14_W10.16mm | U19, U20, U21 |
| 2 | 74LS42 | Package_DIP:DIP-16_W10.16mm | U16, U17 |
| 2 | C_Small | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C16, C17 |
| 2 | Conn_02x05_Top_Bottom | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Horizontal | J2, J3 |
| 1 | 100 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R58 |
| 1 | 4k7 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R4 |
| 1 | 74LS02 | Package_DIP:DIP-14_W10.16mm | U18 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | Conn_01x09 | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | J6 |
| 1 | Conn_02x01 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | Conn_02x09_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x09_P2.54mm_Vertical | J5 |
| 1 | Conn_02x26_Odd_Even | Connector:nova_fp | J1 |
| 1 | Jumper | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R69 |
More from ForgottenMachines/Data-General-Nova
12- 2 layers426.8 × 140.3 mm

- 2 layers426.8 × 131.4 mm

- 2 layers397.5 × 119.4 mm

- 2 layers426.8 × 131.4 mm

- 2 layers372 × 59.7 mm

- 2 layers426.8 × 131.4 mm

- 2 layers254 × 147.3 mm

- 2 layers379 × 139.7 mm

- 2 layers16 × 114 mm

- 2 layers130 × 90.9 mm

- 4 layers73.9 × 53.5 mm

- 2 layers368.3 × 90.8 mm

Similar boards
- 2 layers279 × 200.3 mm

K-1013-floppy controller replica
eduardocasino/k-1013-floppy-disk-controller-replica
MTU's K-1013 Rev. D Floppy DIsk Controller replica
257 parts3 - 2 layers385 × 230 mm

- 2 layers486 × 306.3 mm

- 2 layers630 × 300 mm

- 2 layers370.8 × 298.5 mm

8 Bit Computer
The-Invent0r/8-bit-Computer-PCB
These are the KiCAD files for my 8-Bit Computer.
323 parts142 - 2 layers624.6 × 303.9 mm

SPU2
rraider/Seminarkurs2021
Entwicklung eines turingvollständigen, primitiven Microcontroller in der Software Digital
736 parts7MIT - 4 layers304.5 × 217.2 mm

Latest Full Backplane
Trilobyte-CPU/8-bit-computer
A DIY 8-bit computer built mostly with discrete logic chips
478 parts2 - 2 layers95.9 × 90.2 mm

Questions
How big is the Nova1200 PCB?
It measures 400.1 × 101.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Nova1200 use?
191 parts, built around the 74LS42PC, 74LS173SC, 74LS257PC and 74LS02PC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Nova1200 KiCad files?
From the ForgottenMachines/Data-General-Nova repository on GitHub, at the commit this page was made from: the board is DG Nova Front Panel by Marcel van Herk/nova1200rev2pcb/nova1200.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Nova1200 design in my own project?
Its repository states no licence, so its author keeps all rights: ask ForgottenMachines before reusing the design.