4 layers99 × 53.3 mm
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0
2 layers24 × 33 mm
JALC
foorschtbar/JALCJACL - Just another LED Controller
- Size
- 24 × 33 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 6
- Nets
- 19
- Pads
- 32
- Tracks, vias
- 23, 3
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 28 Dec 2024
- Updated
- 28 Dec 2024
Overview
JALC is an open-source printed circuit board by foorschtbar, from the foorschtbar/JALC repository on GitHub. It is a 2-layer board of 24 × 33 mm with 6 parts on 19 nets, routed with 23 tracks and 3 vias.
It is built around the WS2812B. Its parts include 2 resistors, 1 capacitor, 1 IC, 1 diode and 1 connector. It belongs with the ESP32 and RISC-V boards of this library.
Main components
1Parts
6| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 470R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 1 | 1000uF | Capacitor_Tantalum_SMD:CP_EIA-7343-43_Kemet-X | C1 |
| 1 | Conn_01x03 | SolderConnector:SolderConnector | J1 |
| 1 | ESP32-C3_SUPERMINI | MODULE_ESP32-C3_SUPERMINI:MODULE_ESP32-C3_SUPERMINI | U1 |
| 1 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1 |
Questions
How big is the JALC PCB?
It measures 24 × 33 mm and has 2 copper layers, 1.6 mm thick.
What parts does the JALC use?
6 parts, built around the WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the JALC KiCad files?
From the foorschtbar/JALC repository on GitHub, at the commit this page was made from: the board is JALC.kicad_pcb and its schematic JALC.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the JALC design in my own project?
Its repository states no licence, so its author keeps all rights: ask foorschtbar before reusing the design.
Similar boards
- 2 layers26 × 30 mm
Microcontroller
FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop
34 parts1.1kCC-BY-4.0 - 4 layers82.6 × 82.5 mm
- 2 layers95.3 × 161.9 mm
- 2 layers42.8 × 28.8 mm
MM Skirt
PrintersForAnts/Micron
If you want to purchase full kits there are 3 available (Kits are slowly updating to R1 hardware just make sure to double check the included hardware in your kit and if you have any questions reach out in the discord)
11 parts741GPL-3.0 - 2 layers149.6 × 127.1 mm
- 2 layers285.5 × 95 mm
- 2 layers177.7 × 144.5 mm
