Skip to the content
2 layers87 × 50.7 mmLazyPad, the printed circuit board in 3D

A macropad to do stuff i am too lazy to do

Size
87 × 50.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
7
Nets
14
Pads
58
Tracks, vias
40, 0
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
23 Jun 2025
Updated
23 Jun 2025

Overview

LazyPad is an open-source printed circuit board by FMG9167, from the FMG9167/LazyPad repository on GitHub, published under the MIT licence. It is a 2-layer board of 87 × 50.7 mm with 7 parts on 14 nets, routed with 40 tracks and 0 vias.

Its parts include 6 switches and 1 IC. It belongs with the keyboards and input boards and the RP2040 boards of this library.

README

README.md

LazyPad

LazyPad is a Macropad made up of 6 keys.

This is my first time creating and submitting anything in HackClub!

CAD

Used Autodesk Fusion to make this.

image

PCB

The PCB was made using KiCAD.

image

image

[Find the cursor if you can :P]

Firmware

KMK was used to make the firmware of the pad.

BOM

  • 6x MX Switched (I dont know much about them any will work i think)
  • 1x XIAO RP2040
  • 4x M3x5x4 Heatset inserts
  • 4x M3x16mm screws

Notes

This was my first time using Fusion and KiCAD but man it worth the time.

Parts

7
QtyValueFootprintReferences
6SW_PushButton_Switch_Keyboard:SW_Cherry_MX_1.00u_PCBSW1, SW2, SW3, SW4, SW5, SW6
1XIAO-RP2040-DIPSeeed Studio XIAO Series Library:XIAO-RP2040-DIPU1

Similar boards

  • 2 layersEncoder, the printed circuit board in 3D

    Encoder

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    7 parts4.3kMIT
  • 2 layers40 × 20 mmSensor smd, the printed circuit board in 3D

    Sensor smd

    scottbez1/splitflap

    DIY split-flap display

    7 parts4.2k
  • 2 layers19.8 × 30 mmZ limit, the printed circuit board in 3D

    Z limit

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    7 parts3.7k
  • 2 layers35.6 × 58.2 mmDisplay Carrier, the printed circuit board in 3D

    Display Carrier

    AxxAxx/AxxSolder

    STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power

    7 parts1.7kGPL-3.0
  • 2 layers20.3 × 16.3 mmMap MPX, the printed circuit board in 3D

    Map MPX

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    7 parts1.2k
  • 2 layers26 × 44 mmCompact carrier board, the printed circuit board in 3D

    Compact carrier board

    jamro/tiny-engineer

    A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

    7 parts1.1k
  • 2 layers26.4 × 53.8 mmAtari pickup, the printed circuit board in 3D

    Atari pickup

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    7 parts1kGPL-3.0
  • 2 layersRj45 breakout, the printed circuit board in 3D

    Rj45 breakout

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    7 parts990GPL-3.0

Questions

How big is the LazyPad PCB?

It measures 87 × 50.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the LazyPad use?

7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the LazyPad KiCad files?

From the FMG9167/LazyPad repository on GitHub, at the commit this page was made from: the board is PCB/LazyPad.kicad_pcb and its schematic PCB/LazyPad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the LazyPad design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).