

Receiver
BLE-based light electric vehicle control system
- Size
- 19 × 12.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 7
- Nets
- 36
- Pads
- 49
- Tracks, vias
- 22, 25
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 7 Mar 2018
- Updated
- 22 Apr 2019
Overview
Receiver is an open-source printed circuit board by fmckeogh, from the fmckeogh/bluefly repository on GitHub, published under the MPL-2.0 licence. It is a 2-layer board of 19 × 12.7 mm with 7 parts on 36 nets, routed with 22 tracks and 25 vias.
It belongs with the radio and wireless boards of this library.
README
README.mdbluefly
BLE-based light electric vehicle control system
Building
TODO
Components
- nRF52810 microcontrollers
- SSD1306 display
- NCR18650GA battery
- Hall-effect thumb control
TODO
Software
- MVP (move thumb and motor spins as a result)
- Proper BLE connection
- Display telemetry
- Transparent passthrough to VESC for configuration from PC/phone
- CLI for configuring remote/receiver
- OTA firmware updates of remote and receiver
- Battery percent on phone
- HomeKit integration
Hardware
- Finalise breadboard design of both remote and receiver
- Initial PCB design and order of both remote and receiver
- Case design
Contributing
Issues and PRs very welcome :)
License
Mozilla Public License Version 2.0(LICENSE or https://www.mozilla.org/en-US/MPL/2.0/)
Parts
7| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | TEST-POINT3 | Connectors:PAD.03X.05 | GND1, SWDCLK1, SWDIO1, VCC1 |
| 1 | Connectors:1X04 | ||
| 1 | deps:Laird_BL652_remove_unused | ||
| 1 | 0.1UF-0402-16V-10% | deps:0402_mod | C1 |
More from fmckeogh/bluefly
1- 2 layers41.9 × 18.4 mm

Similar boards
- 2 layers

Encoder
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
7 parts4.3kMIT - 2 layers40 × 20 mm

- 2 layers19.8 × 30 mm

- 2 layers35.6 × 58.2 mm

Display Carrier
AxxAxx/AxxSolder
STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power
7 parts1.7kGPL-3.0 - 2 layers20.3 × 16.3 mm

- 2 layers26 × 44 mm

Compact carrier board
jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.
7 parts1.1k - 2 layers26.4 × 53.8 mm

Atari pickup
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
7 parts1kGPL-3.0 - 2 layers

Questions
How big is the Receiver PCB?
It measures 19 × 12.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Receiver use?
7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Receiver KiCad files?
From the fmckeogh/bluefly repository on GitHub, at the commit this page was made from: the board is hardware/receiver/receiver.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Receiver design in my own project?
Its repository publishes it under the MPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).