

Placa
2048 eletrônico
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 88
- Nets
- 41
- Pads
- 468
- Tracks, vias
- 1,690, 208
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 4 Aug 2016
- Updated
- 4 Aug 2016
Overview
Placa is an open-source printed circuit board by fmakara, from the fmakara/2048 repository on GitHub. It is a 2-layer board with 88 parts on 41 nets, routed with 1,690 tracks and 208 vias.
It is built around the ATMEGA32A-AU. Its parts include 34 ICs, 16 switches, 12 capacitors, 12 transistors and 8 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.md2048
2048 eletrônico. Leds RGB no lugar dos numeros que acendem seguindo a lógica do jogo. 4 botões de direção e mais botões de reiniciar jogo, salvar/resgatar, desfazer e refazer.
Compilado com Atmel Studio 6.1 e placa com KiCAD 2013
Parts
88| Qty | Value | Footprint | References |
|---|---|---|---|
| 32 | LED3 | LED3 | U1, U1, U10, U10, U11, U11, U12, U12, U13, U13, U14, U14, U15, U15, U16, U16 +16 |
| 16 | SW_PUSH | SW_PUSH_SMALL | SW1, SW1, SW2, SW2, SW3, SW3, SW4, SW4, SW5, SW5, SW6, SW6, SW7, SW7, SW8, SW8 |
| 12 | MOSFET_N | BSH103 | Q1, Q1, Q2, Q2, Q3, Q3, Q4, Q4, Q5, Q5, Q6, Q6 |
| 6 | 100n | SM0603 | C3, C3, C5, C5, C6, C6 |
| 4 | 16p | SM0603 | C1, C1, C2, C2 |
| 2 | 0 | SM0603 | R1, R1 |
| 2 | 100u | SM1206POL | C4, C4 |
| 2 | 16MHz | HC-49V | X1, X1 |
| 2 | 50k | SM0603 | R2, R2 |
| 2 | ATMEGA32-A | TQFP44 | IC1, IC1 |
| 2 | CONN_2 | PINHEAD1-2 | P4, P4 |
| 2 | INPUTS | CONN_10 | P3, P3 |
| 2 | ISP | PIN_ARRAY_5x2 | P1, P1 |
| 2 | SERIAL | PIN_ARRAY_4x1 | P2, P2 |
More from fmakara/2048
2- 2 layers

- 2 layers

Similar boards
- 2 layers216.7 × 89.7 mm

- 2 layers150 × 97 mm

Controller mega32l
dmogn/plc_controller_mega32l_pcb_scheme
PLC controller hardware PCB scheme. ATMega32L, RS485 industrial bus interface, 8 ADC inputs, 8 PWM out, 6 GPIO
82 parts7MIT - 2 layers386.1 × 102 mm

- 2 layers100 × 100 mm

KicadJE uP DAC
promesoft/KicadJE_uP_DAC
STM32 and ATMEGA32A - Eurorack DAC MCP4822 output - Use for Sub 400Hz DDS, LFO, ADSR, Effects - and a small 555 VCO - DDS1 DDS2
275 parts7 - 2 layers80 × 60 mm

Atari SIO2SD Igi Version 11-2016
RichardRozehnal/Atari-SIO2SD-Igi-Version
SIO2SD disk drive emulator for 8bit Atari.
77 parts4GPL-3.0 - 2 layers100 × 100 mm

KicadJE ADSR Mega32
promesoft/KicadJE_ADSR_Mega32
Envelope for ATMEGA32A - Formant VCO - PT2399 Reverb
217 parts2MIT - 2 layers39 × 58.5 mm

Atari SIO2SD Mini
RichardRozehnal/Atari-SIO2SD-Mini
Atari SIO2SD disk drive emulator for 8bit Atari.
41 parts2GPL-3.0 - 2 layers52.6 × 40.2 mm

Thinkpad keyboard
vroland/epd-laptop
Collection of design files and notes towards a portable e-Ink device.
13 parts1
Questions
What parts does the Placa use?
88 parts, built around the ATMEGA32A-AU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Placa KiCad files?
From the fmakara/2048 repository on GitHub, at the commit this page was made from: the board is placa/placa.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Placa design in my own project?
Its repository states no licence, so its author keeps all rights: ask fmakara before reusing the design.