

Solito
Free and open source lighting controller
- Size
- 50.1 × 112 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 110
- Nets
- 65
- Pads
- 350
- Tracks, vias
- 1,354, 91
- Pours
- 11
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 14 Jan 2018
- Updated
- 14 Jan 2018
Overview
Solito is an open-source printed circuit board by fluxoid-org, from the fluxoid-org/Solito repository on GitHub. It is a 2-layer board of 50.1 × 112 mm with 110 parts on 65 nets, routed with 1,354 tracks and 91 vias.
It is built around the ATMEGA32A-AU, DS1338C-3# and BC817-40. Its parts include 24 resistors, 12 capacitors, 9 ICs, 8 connectors and 5 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3ATMEGA32A-AU
TQFP-44(10x10)-40℃~+85℃ 10bit 16MHz 1KB 2.7V~5.5V 2KB 32 32KB 8 Bit AVR Built-in FLASH TQFP-44(10x10) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)DS1338C-3#
SOIC-16-300mil-40℃~+85℃ 2.7V~5.5V Backup power management and battery charging、InsideSRAM/NVRAM、Programmable clock output Built-in I2C SOIC-16-300mil Real Time Clocks ROHSMaxim Integrated (Analog Devices)Real Time ClocksBC817-40
SOT-23-65℃~+150℃ 1 NPN 100MHz 100nA 250 345mW 45V 500mA 5V 700mV NPN SOT-23 Bipolar (BJT) ROHSNexperiaBipolar (BJT)
README
pcb/README.mdSolito PCB
BOM
Item: MCU, ATMEGA32A-AU
Farnell Part: 1704563
Cost: £3.24
Package: TQFP-44
Notes: 3.3V max speed is 10MHz, also in 44-QFN package (too small for hand solder?),
Notes: http://www.wormfood.net/avrbaudcalc.ph
Item: Power supply: NCP1117ST33T3G 3.3V, 1A, 20V max, 3.5V minimum input
Farnell Part: 1652366RL
Cost: £0.41
Package: SOT-223
Notes: See page 8 of data sheet for thermal pad size
Item: Power supply capactiors (10uF)
Farnell Part: 9697012RL
Cost: £0.11 each
Package: 5.4mm high, radial can, SMD
Notes: Need 2 per regulator, input should be 20V capable
Item: Crystal: SMD HC-49S 9C-7.3728MAAJ-T 7.3728 Mhz
Farnell Part: 1842344
Cost: £0.38
Package: HC49/US
Notes: Choose 9.216MHz Xtal, or 7.3728 Mhz for a bit more UART speed (230400)Parts
110| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | VAL** | CC_SCREW_MOUNT | MNT, MNT, MNT, MNT, MNT, MNT, MNT, MNT, MNT, MNT, MNT, MNT, MNT, MNT, MNT, MNT +1 |
| 9 | CONN_1 | CC_PWM_IN | PWM IN, PWM IN, PWM IN, PWM IN, PWM IN, PWM IN, PWM1, PWM1, PWM1 |
| 8 | 10k | SM0805 | R1, R1, R1, R1, R3, R5, R6, R7 |
| 6 | 1k | SM0805 | R3, R3, R3, R4, R4, R4 |
| 6 | R | SM0805 | R4, R8, R9, R10, R11, R12 |
| 3 | 10uF | SM1206 | C2, C2, C2 |
| 3 | 22uH | WE-SMD-2 | L1, L1, L1 |
| 3 | 4.7uF | SM1210 | C1, C1, C1 |
| 3 | 47k | SM0805 | R2, R2, R2 |
| 3 | BC817-40 | CC_SOT23 | Q1, Q1, Q1 |
| 3 | CAT4201 | CAT4201 | U1, U1, U1 |
| 3 | DIODESCH | MBR0520L | D1, D1, D1 |
| 3 | LED OUT | CC_LED | P1, P1, P1 |
| 3 | Val** | SM0603 | SM0603, SM0603, SM0603 |
| 2 | 10uF | CAP_ELECTRO_5MM_DIA | C3, C4 |
| 2 | 15pF | SM0805 | C1, C2 |
| 2 | C | SM0805 | C5, C6 |
| 2 | LED | SM0805 | D1, D2 |
| 2 | VAL** | CC_ROT_ENC | ROT_ENC, ROT_ENC_MOD |
| 2 | Val* | SM0805 | SM0805, SM0805 |
| 2 | Val* | SM0603 | SM0805, SM0805 |
| 1 | 2k | SM0805 | R2 |
| 1 | 3.3V Li | CH291-1220LF | BT1 |
| 1 | 32.768kHz | CC_RTC_XTAL_ABS10 | X2 |
| 1 | 7.3728MHz | HC-49S | X1 |
| 1 | AREF_IN | CC_AREF | K1 |
| 1 | ATMEGA32A-A | TQFP44 | IC1 |
| 1 | BT_MODULE | BT_HC06 | U1 |
| 1 | C*** | c_0805 | c_0805 |
| 1 | C*** | SM0603 | c_0805 |
| 1 | CONN_1 | CC_LED_OUT | RGBOUT |
| 1 | DS1338 | CC_DS1338 | U4 |
| 1 | GPIO | CC_GPIO | P3 |
| 1 | I2C_OUT | CC_I2C | P5 |
| 1 | ISP_HEADER | CC_ISP_HEADER | U2 |
| 1 | LED_OUT | CC_LED | P2 |
| 1 | LOGO | LOGO | G*** |
| 1 | NCP1117ST33T3G | SOT223 | U3 |
| 1 | ROTENC | ROTARY_ENCODER | U5 |
| 1 | SPI_DISP | CC_SPI_DISP | P4 |
| 1 | UART | CC_UART | P1 |
| 1 | VAL** | CC_ADXL345 | ADXL345 |
| 1 | VAL** | CC_PAD | CC_PAD |
| 1 | Val** | SIL-2 | PWR |
Similar boards
- 2 layers72.4 × 45.7 mm

- 2 layers50.4 × 41.8 mm

- 2 layers98 × 53.3 mm

Jnedbal microflic junction shield 1 1 microflic junction shield
oomlout/oomlout_oomp_project_bot_v_2
83 parts - 2 layers216.7 × 89.7 mm

- 2 layers150 × 97 mm

Controller mega32l
dmogn/plc_controller_mega32l_pcb_scheme
PLC controller hardware PCB scheme. ATMega32L, RS485 industrial bus interface, 8 ADC inputs, 8 PWM out, 6 GPIO
82 parts7MIT - 2 layers386.1 × 102 mm

- 2 layers100 × 100 mm

KicadJE uP DAC
promesoft/KicadJE_uP_DAC
STM32 and ATMEGA32A - Eurorack DAC MCP4822 output - Use for Sub 400Hz DDS, LFO, ADSR, Effects - and a small 555 VCO - DDS1 DDS2
275 parts7 - 2 layers80 × 60 mm

Atari SIO2SD Igi Version 11-2016
RichardRozehnal/Atari-SIO2SD-Igi-Version
SIO2SD disk drive emulator for 8bit Atari.
77 parts4GPL-3.0
Questions
How big is the Solito PCB?
It measures 50.1 × 112 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Solito use?
110 parts, built around the ATMEGA32A-AU, DS1338C-3# and BC817-40. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Solito KiCad files?
From the fluxoid-org/Solito repository on GitHub, at the commit this page was made from: the board is pcb/Solito.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Solito design in my own project?
Its repository states no licence, so its author keeps all rights: ask fluxoid-org before reusing the design.