2 layers55 × 80 mm
Board esp32 v2
sudomesh/disaster-radio
A (paused) work-in-progress long-range, low-bandwidth wireless disaster recovery mesh network powered by the sun.
101 parts1.1k
2 layers161.5 × 107.7 mm
Quarter 3 project for robo 2
- Size
- 161.5 × 107.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 9
- Nets
- 47
- Pads
- 74
- Tracks, vias
- 81, 19
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 2 Mar 2024
- Updated
- 9 Apr 2024
Overview
RL2D is an open-source printed circuit board by FluffyCube9343, from the FluffyCube9343/RocketLeague2D repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 161.5 × 107.7 mm with 9 parts on 47 nets, routed with 81 tracks and 19 vias.
It is built around the ESP32-WROOM-32U. Its parts include 4 switches, 1 resistor, 1 IC and 1 connector. It belongs with the ESP32 boards of this library.
Main components
1README
README.md
Rocket League 2D
Vrishak's attempt at a popular consumer game, replicated in 2D through microcontrollers and TFTs. This is a quarter 3 project for Robotics 2 finished in ~3 weeks.
This game relicates a very minimalistic version of turning, moving, ball collisions, friction, and wall collisions. Single player for now, will be multiplayer soon.
Usage
Code is available at code. Working code (and essentially final code) is available at code/working.
This program is compiled and meant to be for NodeMCU-32S, a variant of the ESP32 board. Graphics are optimized through TFT eSPI.
Code and all finished by approximately 2024-03-21, fancy documentation completed 2024-04-09.
Parts
9| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | SW_FancyButton | RL2D:FancyButton | SW1, SW2, SW3 |
| 1 | 330Ω | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal | R1 |
| 1 | 9V Battery | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | BT1 |
| 1 | ESP32_WROOM-32 | RL2D:ESP32 | MCU1 |
| 1 | ILI9341 2.8" TFT LCD | RL2D:ILI9341 2.8inch | U1 |
| 1 | SW_On | RL2D:Switch | SW4 |
| 1 | Steer_Joystick | RL2D:Joystick | J1 |
Questions
How big is the RL2D PCB?
It measures 161.5 × 107.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RL2D use?
9 parts, built around the ESP32-WROOM-32U. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RL2D KiCad files?
From the FluffyCube9343/RocketLeague2D repository on GitHub, at the commit this page was made from: the board is schema/RL2D/RL2D.kicad_pcb and its schematic schema/RL2D/RL2D.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the RL2D design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers110 × 110 mm
FreeDSP aurora
freeDSP/freeDSP-aurora
freeDSP ADAU1452 with 8 analog input, 8 analog outputs, S/P-DIF I/O, ADAT I/O, USB Audio Class2, WiFi, Bluetooth
506 parts226CC-BY-SA-4.0 - 2 layers63.5 × 63.5 mm
Main pcb
peterkrull/quad
Firmware, hardware and documentation for my autonomous quad copter project
45 parts210GPL-3.0 - 4 layers65 × 56 mm
- 2 layers94 × 79 mm
- 2 layers263.5 × 63.5 mm
Tobor
evezor/tobor_v00
Tobor (robot spelled backwards), was built to be the most versatile open-source robotics system
124 parts126CERN-OHL-P-2.0 - 2 layers121 × 68 mm
Freeds sanchez
pablozg/freeds
Derivador de energía solar excedente creado por Pablo Zerón, Diseño PCB por Amcalo, Tester original por Aeizoon, Wiki por Zoilo Mora
42 parts108 - 2 layers74.4 × 51.2 mm
Esp32-wroom timer
AlessandroAU/Chorus32-ESP32LapTimer
This is an ESP32 port of the popular Chorus RF Laptimer
66 parts102GPL-3.0