

Pot adapter
- Size
- 15.2 × 22.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 3
- Nets
- 4
- Pads
- 11
- Tracks, vias
- 10, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 17 Jan 2024
- Updated
- 11 Nov 2025
Overview
Pot adapter is an open-source printed circuit board by flpvsk, from the flpvsk/pt-workshop repository on GitHub. It is a 2-layer board of 15.2 × 22.9 mm with 3 parts on 4 nets, routed with 10 tracks and 0 vias.
It belongs with the interfaces and adapters boards of this library.
Parts
3| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Conn_01x03_Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1, J2 |
| 1 | R_Potentiometer_Shield | R0904NB10KL-25KQ:V3_TRIM_R0904NB10KL-Keepout | RV1 |
More from flpvsk/pt-workshop
8- 4 layers27.9 × 63.5 mm

- 4 layers33 × 63.5 mm

- 4 layers30.5 × 73.7 mm

- 4 layers33 × 55.9 mm

- 4 layers27.9 × 50.8 mm

- 4 layers75 × 54 mm

- 4 layers40.6 × 58.4 mm

- 4 layers22.9 × 55.9 mm

Similar boards
- 2 layers40 × 30 mm

- 2 layers51.9 × 16 mm

Passive2-rpi non standard adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO
3 parts4.4kGPL-2.0 - 2 layers16.3 × 16.3 mm

- 2 layers

Sub
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
3 parts4kMIT - 2 layers85 × 30 mm

- 2 layers124.5 × 33.7 mm

- 2 layers10.5 × 83 mm

- 2 layers21.2 × 51.3 mm

Pico reset
hackclub/sprig
🍃 Learn to code by making games in a JavaScript web-based game editor.
3 parts1.1kMIT
Questions
How big is the Pot adapter PCB?
It measures 15.2 × 22.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pot adapter use?
3 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pot adapter KiCad files?
From the flpvsk/pt-workshop repository on GitHub, at the commit this page was made from: the board is pot-adapter/pot-adapter.kicad_pcb and its schematic attenuverters/attenuverters.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pot adapter design in my own project?
Its repository states no licence, so its author keeps all rights: ask flpvsk before reusing the design.