Skip to the content
2 layers30 × 70 mmPiste a reference, the printed circuit board in 3D

ESPHome IR integration for Technibel SCDF32C5I AC — fully reverse-engineered IR protocol / Intégration ESPHome IR pour climatiseur Technibel SCDF32C5I — protocole IR entièrement décodé

Size
30 × 70 mm
Copper layers
2
Thickness
1.6 mm
Parts
9
Nets
7
Pads
31
Tracks, vias
23, 1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
28 May 2026
Updated
26 Oct 2026

Overview

Piste a reference is an open-source printed circuit board by flowcool, from the flowcool/esphome-technibel-scdf32 repository on GitHub, published under the MIT licence. It is a 2-layer board of 30 × 70 mm with 9 parts on 7 nets, routed with 23 tracks and 1 via.

It is built around the TSAL6400. Its parts include 3 capacitors, 3 resistors, 1 IC, 1 diode and 1 transistor. It belongs with the home automation and IoT boards and the ESP32 and RISC-V boards of this library.

Main components

1

README

hardware/piste-a-reference/README.md

Piste A reference perfboard

This directory is the construction authority for the fresh Phase 10 reference board. The previous hand-drawn/SVG layout is obsolete and must not be used.

Orientation and coordinates

  • Board: isolated-pad FR4 perfboard, 30 × 70 mm, 10 columns × 24 rows.
  • Component-side coordinates: columns A–J left to right, rows 1–24 top to bottom.
  • The XIAO USB-C connector faces row 1.
  • The solder-side PDF is already mirrored to match the board as held with the solder side facing the operator. Do not mirror it again.

XIAO ESP32-C3 pin mapping

The schematic and PCB both represent the complete 2×7 XIAO socket:

Left row, top to bottomFunctionRight row, top to bottomFunction
1D085V / VBUS
2D1 / GPIO39GND
3D2103V3
4D314D10
5D413D9
6D512D8
7D611D7

Only pins 2, 8, 9, and 10 are electrically used by this board. All other XIAO pins remain available and unconnected.

Mandatory polarity and pinout

  • Q1 is the Mouser onsemi BC33740BU. With the flat face toward the observer and leads down: pin 1 = Collector, pin 2 = Base, pin 3 = Emitter (C-B-E).
  • D1 must be a fresh Mouser Vishay TSAL6400: pin 2/anode/long lead at F23; pin 1/cathode/short lead/flat side at G23.
  • C3: positive pin 1 at J19; negative pin 2/stripe at I19.
  • C2 and C3 are directly across 5V and GND, before R3.

Construction hold point

Before soldering, review these native and textual artifacts together:

  1. piste-a-reference.kicad_sch
  2. piste-a-reference.kicad_pcb
  3. wiring-table.md

The current partially assembled board remains untouched as rollback/evidence. Construction uses a new perfboard and fresh driver components.

Verification

Install KiCad 9+ and run:

bash
./verify-design.sh

The gate passes only when ERC reports zero errors/warnings and DRC reports zero violations, zero unconnected pads, and zero schematic-parity problems.

The generator additionally requires kicad-sch-api==0.5.6:

bash
python3 -m venv /tmp/piste-a-kicad-venv
/tmp/piste-a-kicad-venv/bin/pip install -r requirements.txt
/tmp/piste-a-kicad-venv/bin/python generate_design.py

Regeneration is deterministic for component placement, net assignments, and wire coordinates. KiCad-generated UUIDs in the schematic may differ after a full regeneration.

Parts

9
QtyValueFootprintReferences
110 kohmR2R2
1100 nFC2C2
1100 nFC1C1
1100 uFC3C3
147 ohm / 0.6 WR3R3
1470 ohmR1R1
1BC33740BU C-B-EQ1Q1
1TSAL6400D1D1
1XIAO ESP32-C3U1U1

Similar boards

  • 2 layers21 × 36 mmIr uart, the printed circuit board in 3D

    Ir uart

    werediver/ir-uart

    IR UART 9600 baud adapter

    23 parts3CERN-OHL-P-2.0
  • 2 layers14 × 15.5 mmVsop breakout, the printed circuit board in 3D

    Vsop breakout

    ExplodingWaffle/vsop-breakout

    VSOP98260 IR Transceiver Breakout Board PCB

    9 parts2MIT
  • 2 layers103 × 30.5 mmTS Back Endcap, the printed circuit board in 3D

    TS Back Endcap

    EEVengers/ThunderScope

    ThunderScope GitHub Repo

    9 parts1.3kMIT
  • 2 layers31.8 × 47.6 mmNGC 38 connector, the printed circuit board in 3D

    NGC 38 connector

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    9 parts1.2k
  • 2 layers24 × 27.3 mmExpansion Card Retrofit, the printed circuit board in 3D

    Expansion Card Retrofit

    FrameworkComputer/ExpansionCards

    Reference designs and documentation to create Expansion Cards for the Framework Laptop

    9 parts1.1kCC-BY-4.0
  • 2 layers15.6 × 17.3 mmSKR Mini TFT Thermistor Board, the printed circuit board in 3D

    SKR Mini TFT Thermistor Board

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    9 parts1.1kGPL-3.0
  • 2 layers39.1 × 49.5 mmLearnoliver, the printed circuit board in 3D

    Learnoliver

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    9 parts915

Questions

How big is the Piste a reference PCB?

It measures 30 × 70 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Piste a reference use?

9 parts, built around the TSAL6400. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Piste a reference KiCad files?

From the flowcool/esphome-technibel-scdf32 repository on GitHub, at the commit this page was made from: the board is hardware/piste-a-reference/piste-a-reference.kicad_pcb and its schematic hardware/piste-a-reference/piste-a-reference.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Piste a reference design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).