2 layers314.8 × 118.8 mm
Keeb
FlorianNaef/keeb
For Kicad to work, you need 1. The symbols and footprints by scottokeebs 2. The symbols and footprints in this repo.
114 parts
2 layers110 × 76 mm
Keeb
FlorianNaef/keebFor Kicad to work, you need 1. The symbols and footprints by scottokeebs 2. The symbols and footprints in this repo.
- Size
- 110 × 76 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 33
- Nets
- 59
- Pads
- 198
- Tracks, vias
- 117, 0
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 19 Nov 2024
- Updated
- 15 Feb 2025
Overview
Keeb is an open-source printed circuit board by FlorianNaef, from the FlorianNaef/keeb repository on GitHub. It is a 2-layer board of 110 × 76 mm with 33 parts on 59 nets, routed with 117 tracks and 0 vias.
Its parts include 16 diodes, 16 switches and 1 IC. It belongs with the keyboards and input boards and the RP2040 boards of this library.
README
README.mdkeeb
For Kicad to work, you need
- The symbols and footprints by scottokeebs
- The symbols and footprints in this repo. For this you need to set a path to the directory of this repo and add the symbol library and footprints like in 1.
Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | Diode | ScottoKeebs_Components:Diode_DO-35 | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16 |
| 16 | Keyswitch | ScottoKeebs_Choc:Choc_V1_1.00u | S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S13, S14, S15, S16 |
| 1 | Raspberry_Pi_Pico | ScottoKeebs_MCU:Raspberry_Pi_Pico | U1 |
Questions
How big is the Keeb PCB?
It measures 110 × 76 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Keeb use?
33 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Keeb KiCad files?
From the FlorianNaef/keeb repository on GitHub, at the commit this page was made from: the board is kicad/v1/v1.kicad_pcb and its schematic kicad/v1/v1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Keeb design in my own project?
Its repository states no licence, so its author keeps all rights: ask FlorianNaef before reusing the design.
More from FlorianNaef/keeb
1Similar boards
- 2 layers65 × 30 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
33 parts1kGPL-3.0 - 2 layers127 × 96 mm
Amiga gfxcard
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
33 parts1k - 2 layers92.7 × 58.4 mm
Hacky holidays
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
33 parts915 - 2 layers240 × 120 mm
Quiver PDB 01
Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.
33 parts617CERN-OHL-S-2.0 - 2 layers75 × 26 mm
DIY detector
ozel/DIY_particle_detector
A mobile low-cost spectrometer for measuring radioactivity and the energy of ionising radiation like alpha particles and electrons
33 parts558BSD-2-Clause - 2 layers100 × 50 mm
Pixelix
BlueAndi/Pixelix
Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.
33 parts447MIT - 2 layers99.1 × 71.1 mm
CONTROLLER Standby Instrument
jrsteensen/OpenHornet
OpenHornet 1:1 F/A-18C Simulator Repository
33 parts431 - 2 layers65 × 30 mm
