4 layers16.9 × 119.4 mm
4 layers54 × 54 mm
Exo Maker
FlorianBnGld/PCB_Maker- Size
- 54 × 54 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 26
- Nets
- 73
- Pads
- 187
- Tracks, vias
- 342, 47
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 3 Feb 2025
- Updated
- 3 Feb 2025
Overview
Exo Maker is an open-source printed circuit board by FlorianBnGld, from the FlorianBnGld/PCB_Maker repository on GitHub. It is a 4-layer board of 54 × 54 mm with 26 parts on 73 nets, routed with 342 tracks and 47 vias.
It is built around the MIC4606-2YTS-TR and USBLC6-2SC6. Its parts include 3 ICs, 3 connectors and 2 resistors. It belongs with the STM32 boards of this library.
Main components
2
MIC4606-2YTS-TR
TSSOP-16-40℃~+125℃ 1A 1A 2.2V 200uA 20ns 20ns 35ns 35ns 4 5.25V~16V 800mV Full-Bridge MOSFET Under Voltage Protection、Short Circuit Protection TSSOP-16 Gate Drivers ROHSMicrochip TechnologyGate Drivers
USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
README
README.mdPCB_Maker
Parts
26| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H4 |
| 2 | 0,5u | Capacitor_SMD:C_0402_1005Metric | Cb1, Cb2 |
| 2 | 4,7u | Capacitor_SMD:C_0402_1005Metric | CIN1, CIN2 |
| 2 | 5,1k | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 1 | 0,1u | Capacitor_SMD:C_0402_1005Metric | Cnrst1 |
| 1 | 137k | Resistor_SMD:R_0402_1005Metric | RFBB1 |
| 1 | 171013801 | MagI3C:171013801 | MagI3C1 |
| 1 | 1u | Capacitor_SMD:C_0402_1005Metric | CVCC1 |
| 1 | 2u | Capacitor_SMD:C_0402_1005Metric | CDD1 |
| 1 | 402k | Resistor_SMD:R_0402_1005Metric | RFBT1 |
| 1 | 47u | Capacitor_SMD:C_0402_1005Metric | Cout1 |
| 1 | 5,6k | Resistor_SMD:R_0402_1005Metric | RSW1 |
| 1 | Conn_01x04 | Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J3 |
| 1 | Conn_02x07_Odd_Even | Connector_JST:JST_PHD_B14B-PHDSS_2x07_P2.00mm_Vertical | J1 |
| 1 | Connector | Connector_AMASS:AMASS_XT60-F_1x02_P7.20mm_Vertical | XT60 |
| 1 | MIC4606-2YTS-TR | MIC4606-2YTS-TR:TSSOP16_TS_MCH_MIS | U2 |
| 1 | STM32G431CBUx | Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U3 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J2 |
| 1 | ~ | FDMQ86530L:MOSFET_FDMQ86530L | FDMQ86530L1 |
Questions
How big is the Exo Maker PCB?
It measures 54 × 54 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Exo Maker use?
26 parts, built around the MIC4606-2YTS-TR and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Exo Maker KiCad files?
From the FlorianBnGld/PCB_Maker repository on GitHub, at the commit this page was made from: the board is Exo_Maker/Exo_Maker.kicad_pcb and its schematic Exo_Maker/Exo_Maker.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Exo Maker design in my own project?
Its repository states no licence, so its author keeps all rights: ask FlorianBnGld before reusing the design.
Similar boards
- 2 layers290.1 × 130 mm
- 4 layers95 × 55.5 mm
EinkPDA keyboard
TalismanDesign/PocketMage_PDA
An E-Ink PDA device using the ESP32 S3.
137 parts2kApache-2.0 - 4 layers299 × 127 mm
- 2 layers42 × 67 mm
- 2 layers134 × 88 mm
Tulipcc
shorepine/tulipcc
The Tulip Creative Computer and AMYboard - portable Python synthesizers
103 parts978 - 4 layers70.8 × 108 mm
- 4 layers28.2 × 26.1 mm
DongleHiderPlus PCB
LeoDJ/FW-EC-DongleHiderPlus
Framework Expansion Card that includes a USB hub to hide a bare dongle inside and still have a USB-A port externally
23 parts497CERN-OHL-W-2.0